0330000001

12 11 10 9 7 8 5 6 4 3 2 1 H H 76 A 48 A 10 2X1.0 80 G A 25.50±0.25 2X 3.75 BEFORE COIN 67 ⌀C SECTION C-C 70 0.90±0.20 B 65 1.50 2X 2.0 63 74 46 ⌀D SECTION B-B F 84 87 2.45 50 3.05±0.05 2.45±0.05 89 50A 2X 6.15 82 0.80±0.03 85 83 F CARRIER BUMP DIRECTION POINTS DOWN FOR TIN PLATED TERMINALS POINTS UP FOR PRECIOUS PLATED TERMINALS (0.30) 2.67±0.20 1.00 89A SEE SHEET 5 FOR M3 GRIP CODE TERMINAL B C 15.00 0.80±0.05 E G ISO VIEW SCALE 2:1 C E B SECTION A-A GENERAL NOTES: (UNLESS OTHERWISE SPECIFIED) 1. MATING TERMINAL SHOWN ON SD-33012-002 (9.65) PROGRESSION 2. MATERIAL: ASTM B422, UNS C19025, HR04 THICKNESS: 0.30 mm ±0.01 TEMPER: FULL HARD (REF) TENSILE: 496-572 MPA 3. TIN PLATED TERMINAL FINISH: OVERALL UNDERPLATE ELECTRODEPOSITED NICKEL OVERALL ELECTRODEPOSITED REFLOW TIN D D 4. GOLD PLATED TERMINAL FINISH OVERALL UNDERPLATE ELECTRODEPOSITED DUCTILE SULFAMATE NICKEL CONTACT AREA - ELECTRODEPOSITED GOLD GRIP AREA - ELECTRODEPOSITED 100% TIN MATTE FINISH 5. SILVER PLATED TERMINAL FINISH OVERALL UNDERPLATE ELECTRODEPOSITED DUCTILE SULFAMATE NICKEL CONTACT AREA - ELECTRODEPOSITED PURE SILVER (0.5% MAX IMPURITIES) SEMI-BRIGHT FINISH - SILVER ANTI-TARNISH : EVABRITE GRIP AREA - ELECTRODEPOSITED 100% TIN MATTE FINISH HOLE PRECIOUS METAL PLATING C C 6. MEETS CRIMP PERFORMANCE SPECIFICATION SAE/USCAR-21 (8/2001) 7. MEETS PERFORMANCE STANDARD FOR AUTOMOTIVE ELECTRICAL CONNECTOR SYSTEMS SAE/USCAR-2 REV 3 (APRIL 2001) 8. MEETS FIELD CORRELATED LIFE TEST SAE/USCAR-20 (11/2001) 9. MEETS WIRING COMPONENT DESIGN GUIDLINES SAE/USCAR-12 REV 2 (12/2001) PRECIOUS METAL PLATED BLADE 10. MEETS ELECTRICAL CONNECTION SYSTEM DESIGN SPECIFICATION (SDS) REV 11 (5/2002) 11. REFERENCE PK-31300-516 FOR REEL DIRECTION B B 12. REFERENCE AS-33000-001 FOR CRIMP INFORMATION SYMBOLS NO HOLE TIN PLATING = 0 = 0 TIN PLATED BLADE = 0 A P1 RELEASE DATE 11 2020/03/06 10 02:34:08 C 9 8 7 6 mm 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.10 1 PLACE ± 0.3 0 PLACES ± = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 CURRENT REV DESC: EC NO: 631014 DRWN: NVENKATESHSH CHK'D: ADHIR APPR: ADHIR INITIAL REVISION: DRWN: LPULLIAM APPR: bmoser THIRD ANGLE PROJECTION 4 2019/05/11 2020/03/06 2020/03/06 2006/01/31 2006/02/02 DRAWING SERIES C-SIZE 33000 3 MX150 1.5MM BLADE TERMINAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33000-001 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 D2 SHEET NUMBER 1 OF 5 1 A 12 11 10 9 8 7 5 6 4 3 2 1 H H G G FAMILY GENDER SEALING PLATING Sn F E MX150 BLADE MAT SEAL Au UNSEALED D Ag PART NUMBER 33000-0001 33000-1001 33000-0002 33000-1002 33000-0003 33000-1003 33000-0004 33000-1004 33011-1002 33011-0002 33011-1004 33011-0004 33011-1006 33011-0006 33011-1008 33011-0008 33011-2003 33011-3003 33011-2002 33011-3002 33011-2001 33011-3001 33011-2004 33011-3004 PAYOFF GRIP DIRECTION CODE RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) A WIRE SIZES* ±0.30 ±0.30 ±0.30 3.9 3.8 1.7 1.6 3.3 3.1 1.3 1.4 1.50-2.00mm² 20/18/16AWG 18 0.75-1.25mm² 22 22AWG M3 0.35-0.50mm² 14AWG 14 1.50-2.00mm² 20/18/16AWG 18 0.75-1.25mm² 22 2.7 0.9 3.9 3.8 1.7 1.6 3.3 3.1 1.3 1.4 F 1.54 ±0.1 2.5 2.7 0.9 3.9 3.8 1.7 1.6 3.3 3.1 1.3 1.4 22AWG 2.5 2.6 0.9 1.0 0.35-0.50mm² 2.5 2.7 0.9 0.75-1.25mm² M3 2.5 HIGH PERFORMANCE Sn 1.0 0.9 1.50-2.00mm² 20/18/16AWG 22 0.9 2.6 14AWG 18 2.6 2.5 0.35-0.50mm² 14 2.5 SPECIAL CHARACTERISTICS E HIGH PERFORMANCE Au 22AWG M3 D C ±0.30 14AWG 14 B 1.0 1.54 ±0.1 D HIGH PERFORMANCE Ag 1.54 ±0.1 * REFERENCE AS-33000-001 FOR SPECIFIC WIRE TYPES C C B B SYMBOLS = 0 = 0 = 0 A P1 RELEASE DATE 11 2020/03/06 10 02:34:08 C 9 8 7 6 mm GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.10 1 PLACE ± 0.3 0 PLACES ± = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 CURRENT REV DESC: EC NO: 631014 DRWN: NVENKATESHSH CHK'D: ADHIR APPR: ADHIR INITIAL REVISION: DRWN: LPULLIAM APPR: bmoser THIRD ANGLE PROJECTION 4 2019/05/11 2020/03/06 2020/03/06 2006/01/31 2006/02/02 DRAWING SERIES C-SIZE 33000 3 MX150 1.5MM BLADE TERMINAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33000-001 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 D2 SHEET NUMBER 2 OF 5 1 A 10 H 9 SEE Detail1 7 8 R0.20 (4) 25.4 2.600 4 3 2 1 H (0.150) R1.45 (3) 19.05 5 6 13.987 11 13.987 12 14.242 14.242 12.167 12.970 11.081 2.550 6.35 3.161 1.052 12.167 BLOCK 0.178 11.081 0 G 4MM TAP AROUND OPENING 11.737 25.4 19.05 12.687 11.737 6.35 0 (2) BREAK SHARP EDGE Detail1 0.919 SLOT CENT. TO 2.600 (R 0.10) F G 1.900 SCALE 10:1 CHECKING-AID BREAK SHARP 45° X 0.50 (8) 2 PIECE ASM. A2 TOOL STEEL EDGE BY HAND 30.48 F HARDEN & GRIND TO A ROCKWELL 2 PLCS. (R 0.10) HARDNESS "C" SCALE OF 56-58 CAP BREAK SHARP 21.70 EDGE BY HAND 2 PLCS. (R 0.10) INSPECTION SLOT E E 11.3 6.93 2.00 (2) 0 0 front1 ° 45 15.05 10.35 0 15.05 10.35 0 .3 (4) X0 D CHECKING AID TOLERANCE D .XXX = .005 BLOCK .XX = .03 .X = .3 CRIMP REQUIREMENTS: 7.05 PUNCHES 45° X 0.50 (8) KNOCK DOWN (ADJUST TO MAINTAIN STRAIGHT CRIMP) 25.4 C 1. CRIMP STRAIGHTNESS MUST BE MAINTAINED. USE A KNOCKDOWN TOOL LOCATED AS SHOWN. TERMINAL BOX MUST NOT BE DEFORMED TERMINAL 19.05 3. FOR OTHER MECHANICAL REQUIREMENTS ON CRIMPED TERMINALS, REFER TO SAE/USCAR-21 (5-13-02) SECTIONS 4.2 (VISUAL INSPECTION), 4.3 (CROSS SECTION ANALYSIS) AND 4.4 (CONDUCTOR CRIMP PULLOUT FORCE) ANVIL CRIMP TOOLING 6.35 C 2. AFTER CRIMPING, THE TERMINAL AND WIRE MUST FIT FREELY INTO THE CHECKING AID 33000-700. PROPER INSERTION DEPTH IS MET WHEN BLADE TIP STOPS ON CAP. SLOTS PROVIDED TO VISUALLY INSPECT STOPAGE OF PIN TIP. SCALE 2:1 0 B B 25.4 19.05 6.35 0 DR. & C'BORE SYMBOLS FOR A 4MM S.H.C.S. = 0 (2) = 0 = 0 0 CAP 6.35 (1.85) A P1 RELEASE DATE 11 2020/03/06 10 02:34:08 C 9 8 7 6 mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.10 1 PLACE ± 0.3 0 PLACES ± = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 CURRENT REV DESC: EC NO: 631014 DRWN: NVENKATESHSH CHK'D: ADHIR APPR: ADHIR INITIAL REVISION: DRWN: LPULLIAM APPR: bmoser THIRD ANGLE PROJECTION 4 2019/05/11 2020/03/06 2020/03/06 2006/01/31 2006/02/02 DRAWING SERIES C-SIZE 33000 3 MX150 1.5MM BLADE TERMINAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33000-001 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 D2 SHEET NUMBER 3 OF 5 1 A 12 11 10 9 7 8 5 6 4 15.80 H 2.60 3 2 1 D 9.00 H 1.60±0.05 1.50 0.84 0.90±0.05 2.84 G G 1.65 ⌀1.10 (0.83) SECTION D-D F D TPA/INSERT DETAIL (16.75) 0.50 F 0.80 1.80 E 3.45 0.75 1.10 1.77 3.21 E E 3.33 7.0° 2.35 2.98 SECTION E-E 2.20 AT LOCKUP DETAIL Z (4.70) SEE DETAIL Z SCALE 20:1 E NOTES: (UNLESS OTHERWISE SPECIFIED) HOUSING DETAIL D TERMINAL F D 1. TOLERANCES: LINEAR ±0.10 ANGULAR 3° 2. ALL DRAFT WITHIN TOLERANCE CL OF BLADE OPENING 3. MAX RADII ON ALL CORNERS SHOWN SHARP: 0.10 4. MAX FLASH PERMISSIBLE: 0.1 5. EJECTOR PIN MARKS PERMISSIBLE IF FLUSH TO 0.25 BELOW SURFACE C C 6. MATERIAL: HOUSING/FINGER SPECIFICATION ENGINEERED FOR MATERIAL WITH THE FOLLOWING PROPERTIES: A. FLEXURAL MODULUS = 4,500 TO 9,400 MPa PER ASTM TEST D790 B. ELONGATION AT YIELD = 2.3% OR BETTER PER ASTM TEST D638 TYPE V TPA/INSERT CAVITY BLADE TERMINAL HOUSING CAVITY B F SECTION F-F B SYMBOLS BLADE CAVITY ASSEMBLY VIEWS = 0 = 0 = 0 A P1 RELEASE DATE 11 2020/03/06 10 02:34:08 C 9 8 7 6 SCALE mm GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.10 1 PLACE ± 0.3 0 PLACES ± = 0 DOCUMENT STATUS 12 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 7. CAVITY SPEC FOR USE ONLY WITH MOLEX BLADE TERMINAL PART NUMBERS (EXCEPT P/N'S FOR UNSEALED APPLICATIONS) SPECIFIED ELSEWHERE ON THIS DRAWING = 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 CURRENT REV DESC: EC NO: 631014 DRWN: NVENKATESHSH CHK'D: ADHIR APPR: ADHIR INITIAL REVISION: DRWN: LPULLIAM APPR: bmoser THIRD ANGLE PROJECTION 4 2019/05/11 2020/03/06 2020/03/06 2006/01/31 2006/02/02 DRAWING SERIES C-SIZE 33000 3 MX150 1.5MM BLADE TERMINAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33000-001 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 D2 SHEET NUMBER 4 OF 5 1 A 12 11 10 9 8 7 5 6 4 3 2 1 H H ISO VIEW 48 G 25.50±0.25 104 SCALE 2:1 BB AA B 10 G AA CC 2X 3.75 BEFORE COIN 101 ⌀D F F SECTION BB-BB CC 94 A BB 2.20 124 96 ⌀C E E SECTION CC-CC D D 0.15 126 CARRIER BUMP DIRECTION POINTS DOWN FOR TIN PLATED TERMINALS SECTION AA-AA POINTS UP FOR PRECIOUS METAL PLATED M3 GRIP CODE TERMINAL TERMINALS SEE TABLE (SHEET 2) FOR PART NUMBERS C C B B SYMBOLS = 0 = 0 = 0 A P1 RELEASE DATE 11 2020/03/06 10 02:34:08 C 9 8 7 6 mm 5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.10 1 PLACE ± 0.3 0 PLACES ± = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 CURRENT REV DESC: EC NO: 631014 DRWN: NVENKATESHSH CHK'D: ADHIR APPR: ADHIR INITIAL REVISION: DRWN: LPULLIAM APPR: bmoser THIRD ANGLE PROJECTION 4 2019/05/11 2020/03/06 2020/03/06 2006/01/31 2006/02/02 DRAWING SERIES C-SIZE 33000 3 MX150 1.5MM BLADE TERMINAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33000-001 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 D2 SHEET NUMBER 5 OF 5 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 TABLE OF CONTENTS L 2 1 MATING CONNECTOR DRAWINGS SHEET NO. SHEET DESCRIPTION 1 NOTES AND BOM 2 CONFIGURATIONS 3-4 KEY CONFIGURATIONS 5 BLADE SEALED ASSEMBLY 6 SYSTEM PACKAGING 7 BACKSHELL NOTES 8 BACKSHELL 9 BACKSHELL CONFIGURATIONS NOTES: VALID UNLESS OTHERWISE SPECIFIED DESCRIPTION 1X2 MOLEX INLINE SD-33471-0001 1X6 SD-33471-0001 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY AS SPECIFIED IN THE MATING CONNECTOR DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESSED AT http://ewcap.uscarteams.org/ -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION (SEE PLR PRE-LOCK VIEW SHEET 5). K L K J b. PRODUCT SPECIFICATION SEE: -STANDARD CONFIGURATION: PS-33471-000 -UL V0 CONFIGURATION: PS-160105-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), TERMINALS, WIRE DIAMETER RANGE, PRODUCT VALIDATION, AND PRODUCT DEVIATIONS. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-635 (PK-33471-000 FOR 1X5) d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-300 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) J H 2. DESIGN - MATERIALS: a. FOR BILL OF MATERIALS SEE: -STANDARD CONFIGURATION: SD-33481-0002 -UL V0 CONFIGURATION: SD-160106-0002 H 3. DESIGN - GEOMETRY: a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART WITH THE EXCEPTION OF UNDERLINED DIMENSIONS. DIMENSIONAL INFORMATION NOT SHOWN ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B). g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR FOR ADDITIONAL INFORMATION SEE SECTION 5 UNDER PROCEDURES IN ES-34735-008. 1X2 G F G F E E D D C A1 NX REMASTERING，CHANGE PS DRAWING NUMBER FROM PS-160105-0001 TO PS-160074-0001 IN NOTES 1.b A 2 MINOR GEOMETRY CHANGE FOR UL V0 UPDATED VIEWSETS 1 INITIAL RELEASE REV REV DESCRIPTION INSPECTION NUMBER LOG LAST NUMBER: 9 ADDED: REMOVED: SYMBOLS B = 0 = 0 = 0 A DOCUMENT STATUS FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 17 RELEASE DATE 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 MM ONLY 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C SCALE ± = 0 1X6 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 1 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION CONFIGURATIONS L L K K UL V0 UNIQUE FEATURE Partial1 SCALE 10:1 J J H H 1X2 - UL V0* 1x2 - STD G G F F E E D D * MINOR GEOMETRY DIFFERENCE THAN STANDARD CONFIGURATION. SEE NOTES 1 & 2 FOR MORE INFORMATION C SYMBOLS B = 0 = 0 = 0 A 1x6 - UL V0* 1x6 - STD DOCUMENT STATUS FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 RELEASE DATE 17 16 2018/10/04 15 14 13 12 11 10 9 8 7 MM ONLY 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C SCALE ± = 0 15:02:02 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 2 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION KEY CONFIGURATIONS 1X2 L L 60° 60° K K KEY A J J 35° 60° H H KEY B G G 35° 60° F F E E KEY C 35° 35° D D C C KEY D SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 3 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION KEY CONFIGURATIONS CONT. L L 1X6 60° 60° K K J J KEY A 30° 60° H H G G KEY B 30° 60° F F E E KEY C 30° 30° D D C C KEY D SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 4 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 SHEET DESCRIPTION 1 CHARTED DIMENSIONS BLADE SEALED ASSEMBLY DESCRIPTION L 1X2 A N/A 1X6 29.69 DIMENSIONS B D C 1.75 21.00 55.50 E 17.30 54.45 17.23 1.75 31.71 9 ⌀DIM C K K MIN PASS-THRU WITH NO CLEARANCE OPTIONAL LASER MARKING ON THIS SURFACE SEE NOTE 3g. TERMINAL POSITION 1 2X DIM B J 3.50 TYP. L J Z B DIM E MAX 3 H A A B H Z LAST TERMINAL POSITION DIM A MAX 2 REAR VIEW (WIRE HARNESS SIDE) DIM D MAX 4 G G F F 6 11.00 5 2.00 E E 7 6.60 D 8 15.00 D PARTIAL A-A SCALE 3:1 C C SYMBOLS B = 0 = 0 = 0 PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN FINAL-LOCK POSITION PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION SECTION B-B A SECTION Z-Z FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 RELEASE DATE 17 16 2018/10/04 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 15:02:02 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 5 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION BACKSHELL L L K K J J H H Y Y G G F F E E 11.00 1.50 D 6.40 D 10.80 PARTIAL Y-Y SCALE 3.5:1 C C SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3.5:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 8 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 SHEET DESCRIPTION 2 1 CHARTED DIMENSIONS BACKSHELL CONFIGURATIONS CKT L BLADE RECEPTACLE CONFIGURATION CONFIGURATION 1X2 �137.46� STANDARD STANDARD DIMENSIONS M N P R 107.84 29.50 27.00 26.25 S 25.00 L ⌀DIM N MIN PASS-THRU WITH NO CLEARANCE K K J J OVERALL MATED SYSTEM WITH BLADE AND RECEPTACLE BACKSHELL �103.47� ⌀DIM P MIN PASS-THRU WITH NO CLEARANCE H H G G OVERALL MATED SYSTEM WITH BLADE BACKSHELL F ⌀DIM R �DIM M� F MIN PASS-THRU WITH NO CLEARANCE E E OVERALL MATED SYSTEM WITH RECEPTACLE BACKSHELL �84.75� D D ⌀DIM S MIN PASS-THRU WITH NO CLEARANCE C C BLADE SEALED ASSEMBLY WITH BLADE BACKSHELL SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 2:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 9 OF 9 1 A