0334710461

20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M TABLE OF CONTENTS SHEET NO. SHEET DESCRIPTION 1 NOTES AND BOM 2 CONFIGURATIONS PACKAGING NOTES: VALID UNLESS OTHERWISE SPECIFIED DESCRIPTION 1. GENERAL: L 3-4 K a. APPLICATION SPECIFICATION SEE: AS-33472-100 RECEPTACLE CONNECTOR ASSEMBLY 6 BACKSHELL NOTES 7 BACKSHELL 8 BACKSHELL CONFIGURATIONS DESCRIPTION DRAWING NO. MOLEX INLINE INTERFACE DEFINITION 1X2 PK-31300-635 1X2 *150-S-002-1-Z05 SD-33481-0001 1X6 PK-31300-903 1X6 *150-S-006-1-Z03 SD-33481-0001 L -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR KEY CONFIGURATIONS 5 MATING INTERFACE/CONNECTOR DRAWINGS MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH DEVICE OR CONNECTOR AS SPECIFIED IN THE MATING INTERFACE/CONNECTOR DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESSED AT . K -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION (SEE PLR PRE-LOCK VIEW SHEET 5). b. PRODUCT SPECIFICATION SEE: -STANDARD CONFIGURATION: PS-33471-000 -UL V0 CONFIGURATION: PS-160105-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), J J TERMINALS, WIRE DIAMETER RANGE, PRODUCT VALIDATION, AND PRODUCT DEVIATIONS. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: SEE PACKAGING CHART d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-301 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) H H 2. DESIGN - MATERIALS: 1x2 a. FOR BILL OF MATERIALS SEE: -STANDARD CONFIGURATION SD-33471-0002 -UL V0 CONFIGURATION SD-160105-0002 3. DESIGN - GEOMETRY: a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART G G WITH THE EXCEPTION OF UNDERLINED DIMENSIONS. DIMENSIONAL INFORMATION NOT SHOWN ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. F F f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B). g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR FOR ADDITIONAL INFORMATION SEE SECTION 5 UNDER PROCEDURES IN ES-34735-008. E E D A1 A D UPDATED THE DRAWING FRAME MINOR GEOMETRY CHANGE FOR UL V0 INSPECTION NUMBER LOG 2 UPDATE VIEWSETS LAST NUMBER: 11 1 INITIAL RELEASE REV REV DESCRIPTION ADDED: 11 REMOVED: C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = 1x6 A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSHI THIRD ANGLE PROJECTION 6 2020/08/21 2020/08/26 2020/08/26 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/04 2016/06/14 DRAWING SERIES D-SIZE 33471 5 SD-33471-0001 MATERIAL NUMBER GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 PSD 001 2 1 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION CONFIGURATIONS L L K K J J 1x2 - STD 1x2 - UL V0* H H G G F F E E D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = B 1x6 - STD DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 1x6 - UL V0* RELEASE DATE 18 2020/08/26 17 0 mm 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 ANGULAR TOL = A D *MINOR GEOMETRY DIFFERENCE THAN STANDARD CONFIGUATION SEE NOTES 1 & 2 FOR MORE INFORMATION 15 14 13 12 11 10 9 8 7 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 6 2020/08/21 2020/08/26 2020/08/26 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/04 2016/06/14 DRAWING SERIES D-SIZE 33471 5 SD-33471-0001 MATERIAL NUMBER GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 PSD 001 2 2 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M SHEET DESCRIPTION KEY CONFIGURATIONS 1X2 L L 60° 60° K K KEY A J 35° 60° J H H KEY B 35° 60° G G F F KEY C 35° 35° E E D D KEY D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 6 2020/08/21 2020/08/26 2020/08/26 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/04 2016/06/14 DRAWING SERIES D-SIZE 33471 5 SD-33471-0001 MATERIAL NUMBER GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 PSD 001 2 3 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M SHEET DESCRIPTION 1X6 KEY CONFIGURATIONS CONT. L L 60° 60° K K KEY A J J 30° 60° H H KEY B G G 30° 60° F F KEY C E E 30° 30° D D KEY D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 6 2020/08/21 2020/08/26 2020/08/26 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/04 2016/06/14 DRAWING SERIES D-SIZE 33471 5 SD-33471-0001 MATERIAL NUMBER GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 PSD 001 2 4 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M CHARTED DIMENSIONS SHEET DESCRIPTION DIMENSIONS DESCRIPTION RECEPTACLE CONNECTOR ASSEMBLY - STD A 1X2 19.40 B C D E F 1.75 21.73 20.55 37.65 19.64 L L 1X6 32.75 1.75 35.21 19.90 37.65 N/A N/A 1.75 35.23 19.90 37.65 33.64 1X6 UL V0 ⌀DIM C *DIM F MAX. *APPLIE TO UL V0 CONFIGURATIONS ONLY K MIN PASS-THRU WITH NO CLEARANCE 11 LASER MARKING ON THIS SURFACE TERMINAL Z SEE NOTE 3g. K 2 POSITION 1 X J DIM D MAX J 3 H H 3.50 TYP Z LAST 4X DIM B TERMINAL DIM E MAX X 1 DIM A MAX POSITION 5 G G REAR VIEW (WIRE HARNESS SIDE) MOLD CAVITY I.D. F THIS LOCATION F RECYCLE CODE THIS LOCATION MANUFACTURING LOCATION CODE THIS LOCATION E E D D 2.75±0.50 6 C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION IN FINAL-LOCK POSITION SECTION Z-Z A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 SECTION X-X 2020/08/26 17 15 14 13 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 12 11 10 9 8 7 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 6 2020/08/21 2020/08/26 2020/08/26 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/04 2016/06/14 DRAWING SERIES D-SIZE 33471 5 SD-33471-0001 MATERIAL NUMBER GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 PSD 001 2 5 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION BACKSHELL NOTES L L BACKSHELL NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34951-001 -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY SPECIFIED IN MOLEX DRAWING SD-33471-0001. -SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. K K -COMPONENTS ARE OPTIONAL AND MUST BE PURCHASED SEPERATELY. -BACKSHELL DESIGN IS OWNED BY SCHLEMMER. -FOR ADDITIONAL INFORMATION SEE THE BACKSHELL COMPONENT DRAWING SD-34949-0001. J J BACKSHELL (BKS) BACKSHELL CUSTOMER MODEL NUMBER LEGEND 34949-XXXX H H CUSTOMER MODEL COMPONENTS 0 - BACKSHELL ONLY 1 - BACKSHELL & MX150 HOUSING KEY A ASSEMBLY 2 - BACKSHELL & MX150 HOUSING KEY B ASSEMBLY 3 - BACKSHELL & MX150 HOUSING KEY C ASSEMBLY 4 - BACKSHELL & MX150 HOUSING KEY D ASSEMBLY 1X2 BACKSHELL FEATURES 1 - WITH RIBS 2 - WITHOUT RIBS G RECEPTACLE SEALED ASSEMBLY G MX150 CIRCUIT SIZE 02, 03, 04, 05, 06 F F E E D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 6 2020/08/21 2020/08/26 2020/08/26 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/04 2016/06/14 DRAWING SERIES D-SIZE 33471 5 SD-33471-0001 MATERIAL NUMBER GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 PSD 001 2 6 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION BACKSHELL L L W K K J J W H H G G 11.00 1.50 F F 10.70 6.50 E E Partial W-W SCALE 4:1 D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 6 2020/08/21 2020/08/26 2020/08/26 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/04 2016/06/14 DRAWING SERIES D-SIZE 33471 5 SD-33471-0001 MATERIAL NUMBER GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 PSD 001 2 7 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M SHEET DESCRIPTION CHARTED DIMENSIONS BACKSHELL CONFIGURATIONS DESCRIPTION DIMENSIONS 1X2 G 26.00 L L K K J J (71.20) ⌀DIM G MIN PASS-THRU WITH NO CLEARANCE H H G G F F E E RECEPTACLE SEALED ASSEMBLY WITH RECEPTACLE BACKSHELL D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 6 2020/08/21 2020/08/26 2020/08/26 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/04 2016/06/14 DRAWING SERIES D-SIZE 33471 5 SD-33471-0001 MATERIAL NUMBER GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 PSD 001 2 8 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M TABLE OF CONTENTS CPA OPTIONAL GROMMET CAP, STANDARD (GC) SEE BOM SHEET NO. SHEET DESCRIPTION 1 NOTES 2 KEY CONFIGURATIONS 3 RECEPTACLE SEALED ASSEMBLY FOR OPTIONS SEE BOM L L BOM 4-5 CONNECTOR HOUSING FOR OPTIONS SEE BOM MAT SEAL OPTIONAL K K SEE BOM NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -STANDARD (NON-SHRT) CONFIGURATIONS DESIGNED TO MATE WITH DEVICE CONNECTION AS SPECIFIED IN DRAWING SD-33481-041 AND EWCAP 150-S-004-1-Z03, AVAILIBLE AT http://ewcap.uscarteams.org/ -SHORTING BAR CONFIGURATIONS DESIGNED TO MATE WITH BLADE SEALED ASSEMBLY SPECIFIED IN DRAWING SD-31280-200 -FOR 1.5mm RECEPTACLE TERMINALS TO BE USED WITH THIS ASSEMBLY. SEE MOLEX DRAWING SD-33012-002. -SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. -ASSEMBLY SHIPPED WITH PLR AND CPA IN PRE-LOCK POSITION (SEE SECTION Z-Z PRE-LOCK). -IN THE EVENT THAT THE PLR IS FOUND IN THE SEATED (FINAL LOCK) POSITION, REFER TO MOLEX SPECIFICATION PS-34646-001, AVAILABLE AT www.molex.com . -ASSEMBLY CONFORMS TO SAE/USCAR-2 REV 4 WITH THE FOLLOWING EXCEPTIONS: ENGAGEMENT FORCE TO MOVE CPA FROM PRE-LOCK TO FINAL LOCK POSITION WHEN UNMATED: 40N MIN. DISENGAGEMENT FORCE TO MOVE CPA FROM FINAL LOCK TO PRE-LOCK POSITION: 3N MIN, 40N MAX. TERMINAL INSERTION FORCE FOR WIRE DIAMETER ABOVE 2.5mm AND NOT EXCEEDING 2.69mm SHALL NOT EXCEED 40 NEWTONS. b. PRODUCT SPECIFICATION SEE: PS-33471-000 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-903 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) PRIMARY LOCK REINFORCEMENT (PLR) FOR OPTIONS SEE BOM J RING SEAL MX150 1X4 RECEPTACLE SEALED ASSEMBLY - STANDARD (STD) H ERGONOMIC GROMMET CAP (GCE) FOR OPTIONS SEE BOM G F J H G F 2. DESIGN - MATERIALS: a. SEE BOM TABLE 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) g. LASER MARKING: TBD E MX150 1X4 RECEPTACLE SEALED ASSEMBLY - ERGO UNLESS COMPONENT NOTED, SEE STANDARD ASSEMBLY D INSPECTION NUMBER LOG LAST NUMBER USED: 5 ADDED: REMOVED: 2 PRIMARY LOCK REINFORCEMENT WITH SHORTING BAR LIFTER (PLR W/ SHORTING BAR) FOR OPTIONS SEE BOM C = B MX150 1X4 RECEPTACLE SEALED ASSEMBLY - SHORTING (SHRT) BAR UNLESS COMPONENT NOTED, SEE STANDARD ASSEMBLY FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/08/27 17 15 14 13 0 mm 12 ADD NEW P/N 33471-0497 W5 ADD NEW P/N 33471-0496 W4 ADD NEW P/N 33471-0495 W3 W2 W1 UPDATED THE DRAWING FRAME ADD NEW P/N 33471-0494 D ADD NEW P/N 33471-0493 REMOVE THE 33471-0489 CPA DESCRIPTION W REV 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:44:52 16 0 ANGULAR TOL = DOCUMENT STATUS W6 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = A E 11 10 9 8 7 MX150 1X4 RECEPTACLE SEALED ASSEMBLY MAT SEAL EC NO: 674870 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: VKOSHY THIRD ANGLE PROJECTION 6 2021/08/23 2021/08/27 2021/08/27 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2010/03/31 2010/04/06 DRAWING SERIES D-SIZE 33471 5 SD-33471-041 MATERIAL NUMBER GENERAL MARKET 3 W6 SHEET NUMBER CUSTOMER SEE BOM 4 PSD 002 2 1 OF 6 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M KEY CONFIGURATIONS 60° 60° L L K K KEY A J J 30° 60° H H G G KEY B 30° 60° F F E E KEY C D D 30° 30° C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = = KEY D A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/08/27 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:44:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 MX150 1X4 RECEPTACLE SEALED ASSEMBLY MAT SEAL EC NO: 674870 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: VKOSHY THIRD ANGLE PROJECTION 6 2021/08/23 2021/08/27 2021/08/27 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2010/03/31 2010/04/06 DRAWING SERIES D-SIZE 33471 5 SD-33471-041 MATERIAL NUMBER GENERAL MARKET 3 W6 SHEET NUMBER CUSTOMER SEE BOM 4 PSD 002 2 2 OF 6 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M RECEPTACLE SEALED ASSEMBLY L L ⌀B LASER MARKING ON THIS SURFACE Z SEE NOTE g. MIN PASS-THRU WITH NO CLEARANCE Y K K 19.80+0.10 -0.35 3 J J Y TERMINAL POSITION 1 Z TERMINAL POSITION 4 A 3X3.50 25.65+0.10 -0.40 4 H H MOLD CAVITY CODE G G RECYCLE CODE LOCATION CODE F F E E CIRCUIT ID D D 1 CHARTED DIMENSIONS 2.75±0.50 A CONFIGURATION MX150 1X4 RECPT SEALED ASSY - STANDARD 36.95 ±0.70 29.14 MX150 1X4 RECPT SEALED ASSY - ERGO 36.95 ±0.90 29.33 36.95 ±0.70 29.14 MX150 1X4 RECPT SEALED ASSY - SHORTING (SHRT) BAR C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = = B PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN FINAL-LOCK POSITION SECTION Y-Y SECTION Z-Z DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/08/27 17 0 mm 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:44:52 16 0 ANGULAR TOL = A B 15 14 13 12 11 10 9 8 7 MX150 1X4 RECEPTACLE SEALED ASSEMBLY MAT SEAL EC NO: 674870 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: VKOSHY THIRD ANGLE PROJECTION 6 2021/08/23 2021/08/27 2021/08/27 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2010/03/31 2010/04/06 DRAWING SERIES D-SIZE 33471 5 SD-33471-041 MATERIAL NUMBER GENERAL MARKET 3 W6 SHEET NUMBER CUSTOMER SEE BOM 4 PSD 002 2 3 OF 6 1 A 20 19 18 17 16 15 33471-0440 33471-0439 33471-0438 33471-0437 33471-0436 33471-0435 33471-0434 33471-0433 33471-0432 33471-0431 33471-0430 33471-0429 VOID KEY KEY D W/ SHRT. BAR, GREEN KEY C W/ SHRT. BAR, BROWN KEY B W/ SHRT. BAR, LT. GRAY KEY A W/ SHRT. BAR, BLACK VOID KEY KEY D W/O MAT SEAL, GREEN KEY C W/O MAT SEAL, BROWN KEY B W/O MAT SEAL, LT. GRAY KEY A W/O MAT SEAL, BLACK VOID KEY KEY D W/ CPA, GREEN KEY C W/ CPA, BROWN KEY B W/ CPA, LT. GRAY KEY A W/ CPA, BLACK VOID KEY KEY D, GREEN KEY C, BROWN KEY B, LT. GRAY KEY A, BLACK M L K J H G 14 VOID KEY KEY D W/ CPA, GREEN KEY C W/ CPA, BROWN KEY B W/ CPA, LT. GRAY KEY A W/ CPA, BLACK VOID KEY KEY D, GREEN KEY C, BROWN KEY B, LT. GRAY KEY A, BLACK KEY C W/ CPA, BLACK 33471-0428 33471-0427 33471-0426 33471-0425 33471-0424 33471-0423 33471-0422 33471-0421 33471-0420 33471-0419 33471-0418 33471-0417 33471-0416 33471-0415 33471-0414 33471-0413 33471-0412 33471-0411 33471-0410 KEY D W/ CPA, GREEN KEY C W/ CPA, BROWN KEY B W/ CPA, LT. GRAY KEY A W/ CPA, BLACK VOID KEY KEY D, GREEN KEY C, BROWN KEY B, LT. GRAY KEY A, BLACK 33471-0409 33471-0408 33471-0407 33471-0406 33471-0405 33471-0404 33471-0403 33471-0402 33471-0401 ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION F 13 12 11 GCO GCO GCO GCO D C B A PS PS PS PS GCO GCO GCO GCO D C B A 9 7 8 SALEABLE SEE P/N 33471-0479 SEE P/N 33471-0478 NOT VALIDATED NOT VALIDATED SEE P/N 33471-0477 SEE P/N 33471-0476 4 4 4 4 NOT RECOMMENDED NOT RECOMMENDED 1 1 1 1 4 4 4 4 NOT RECOMMENDED CPA CPA CPA CPA 4 4 4 4 NOT RECOMMENDED NOT RECOMMENDED M M M M M CPA 4 4 4 4 NOT RECOMMENDED NOT RECOMMENDED GCO P P P P P GCO GCO GCO GCO P P P P M M M M C B A D C B A P GCP GCP GCP P P P M M M M GCP GCP GCP GCP P P P P M M M M GCP GCP GCP GCP P P P P M M M M GCP GCP GCP GCP 3 2 1 M BOM SHEET 1 CPA CPA CPA CPA L K SALEABLE SEE P/N 33471-0475 SEE P/N 33471-0474 NOT RECOMMENDED SALEABLE J D C B A D C B A C D C B A SEE P/N 33471-0473 SEE P/N 33471-0472 SALEABLE SEE P/N 33471-0471 SEE P/N 33471-0470 H SALEABLE SEE P/N 33471-0465 SEE P/N 33471-0464 NOT RECOMMENDED NOT RECOMMENDED CPA CPA CPA CPA SALEABLE G D C B A A B C D C C GCO GCO GCO GCO D GCO GCP GCEO GCEP P P P P P PS M M M M M CPA SEE P/N 33471-0463 SEE P/N 33471-0462 NOT RECOMMENDED NOT RECOMMENDED SALEABLE 1 2 3 4 BLOCKED TERMINAL COMMENTS STATUS CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION TABLE LEGEND COMPONENT F RING SEAL BURNT ORANGE INHERENTLY LUBRICATED SILICONE CPA BRIGHT RED PBT GF30 MAT SEAL LIGHT BLUE INHERENTLY LUBRICATED SILICONE SHORTING BAR PLR NATURAL SPS/NYLON GF20 STANDARD PLR NATURAL SPS/NYLON GF20 ERGONOMIC GROMMET CAP, PLUGGED BLACK SPS/NYLON GF20 ERGONOMIC GROMMET CAP, OPEN STANDARD GROMMET CAP, PLUGGED BLACK BLACK SPS/NYLON GF20 SPS/NYLON GF20 STANDARD GROMMET CAP, OPEN SPS/NYLON GF20 HOUSING KEYING OPTION D BLACK STONE GRAY HOUSING KEYING OPTION C DARK GRAY SPS/NYLON GF20 HOUSING KEYING OPTION C BLACK SPS/NYLON GF20 HOUSING KEY A B HOUSING KEY B HOUSING KEYING OPTION D GREEN SPS/NYLON GF20 C HOUSING KEY C HOUSING KEYING OPTION C BROWN SPS/NYLON GF20 HOUSING KEYING OPTION B LIGHT GRAY D HOUSING KEY D HOUSING KEYING OPTION A BLACK SPS/NYLON GF20 SPS/NYLON GF20 GCO GROMMET CAP, STANDARD, OPEN GCP GROMMET CAP, STANDARD, PLUGGED DESCRIPTION E SPS/NYLON GF20 A D 4 SALEABLE NOT RECOMMENDED NOT RECOMMENDED GCP 5 SEE P/N 33471-0481 SEE P/N 33471-0480 NOT RECOMMENDED 1 1 1 1 D 6 NOT RECOMMENDED M M M M P P P P E ABREVIATION 10 D MATERIAL COLOR BOM/APPLICABLE COMPONENTS TABLE C GCEO GROMMET CAP, ERGONOMIC, OPEN GCEP GROMMET CAP, ERGONOMIC, PLUGGED M MAT SEAL P PLR, STANDARD FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = = R CPA FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 CPA RELEASE DATE 18 2021/08/27 17 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:44:52 16 mm ANGULAR TOL = RING SEAL B DOCUMENT STATUS 0 PLR, SHRT. BAR LIFTER PS A 0 15 14 13 12 11 10 9 8 7 MX150 1X4 RECEPTACLE SEALED ASSEMBLY MAT SEAL EC NO: 674870 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: VKOSHY THIRD ANGLE PROJECTION 6 2021/08/23 2021/08/27 2021/08/27 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2010/03/31 2010/04/06 DRAWING SERIES D-SIZE 33471 5 SD-33471-041 MATERIAL NUMBER GENERAL MARKET 3 W6 SHEET NUMBER CUSTOMER SEE BOM 4 PSD 002 2 4 OF 6 1 A 20 19 18 17 16 15 KEY C W/ SHRT. BAR, DARK GRAY KEY D W/O MAT SEAL, STONE GRAY KEY C W/O MAT SEAL, DARK GRAY KEY D W/ CPA, STONE GRAY KEY C W/ CPA, DARK GRAY M KEY D, STONE GRAY KEY C, DARK GRAY KEY D W/ CPA, STONE GRAY KEY C W/ CPA, DARK GRAY KEY D, STONE GRAY KEY C, DARK GRAY KEY A, BLACK KEY B, W/ CPA, LIGHT GRAY KEY A, BLACK KEY B, LIGHT GRAY KEY D W/ CPA, STONE GRAY KEY C W/ CPA, DARK GRAY KEY D, STONE GRAY KEY C, DARK GRAY KEY A W/ CPA & ERGO. CAP, BLACK L K J G F 12 ASSEMBLY PART NUMBER 10 P P P P 1 1 4 4 P P P P P P P P M M M CPA M CPA M M M M CPA 1 1 4 4 4 4 4 4 4 B GCP GCP GCP GCP GCP GCP GCP GCP B GCP GCP P P P P P P P M M M M M M M D C D C D C A A C C D GCO GCO D GCO GCO A GCEO 3 1 C A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 4 K 2 SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE J A A GCP GCP GCP D D B A A D C B A D B A B C D C C 3 1 M M M M M 1 1 1 1 GCO PS M CPA GCO GCO GCO PS M PS M PS M CPA CPA CPA GCP GCP GCP GCP C M PS M PS M PS PS PS PS PS GCP GCP GCP GCP GCP C A P P P P P M M M M D GCO GCP GCEO GCEP P PS M 4 4 2 2 2 2 3 3 3 3 3 4 4 4 4 4 SALEABLE SALEABLE NOT RECOMMENDED SEE P/N 33471-0488 NOT RECOMMENDED NOT RECOMMENDED SEE P/N 33471-0487 SEE P/N 33471-0486 H SALEABLE SALEABLE SEE P/N 33471-0485 SEE P/N 33471-0484 NOT RECOMMENDED NOT RECOMMENDED SALEABLE 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 2 3 4 CPA 1 BLOCKED TERMINAL G SEE P/N 33471-0483 SEE P/N 33471-0482 NOT RECOMMENDED NOT RECOMMENDED SALEABLE COMMENTS STATUS F CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION RING SEAL BURNT ORANGE INHERENTLY LUBRICATED SILICONE CPA BRIGHT RED PBT GF30 MAT SEAL LIGHT BLUE INHERENTLY LUBRICATED SILICONE SHORTING BAR PLR NATURAL SPS/NYLON GF20 STANDARD PLR NATURAL SPS/NYLON GF20 ERGONOMIC GROMMET CAP, PLUGGED BLACK SPS/NYLON GF20 ERGONOMIC GROMMET CAP, OPEN STANDARD GROMMET CAP, PLUGGED BLACK BLACK SPS/NYLON GF20 SPS/NYLON GF20 STANDARD GROMMET CAP, OPEN SPS/NYLON GF20 HOUSING KEYING OPTION D BLACK STONE GRAY HOUSING KEYING OPTION C DARK GRAY SPS/NYLON GF20 B HOUSING KEY B HOUSING KEYING OPTION D GREEN SPS/NYLON GF20 HOUSING KEYING OPTION C BROWN SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 C HOUSING KEY C HOUSING KEYING OPTION B LIGHT GRAY D HOUSING KEY D HOUSING KEYING OPTION A BLACK GCO GROMMET CAP, STANDARD, OPEN DESCRIPTION GCP GROMMET CAP, STANDARD, PLUGGED GCEO GROMMET CAP, ERGONOMIC, OPEN GCEP GROMMET CAP, ERGONOMIC, PLUGGED M MAT SEAL P PLR, STANDARD BOM/APPLICABLE COMPONENTS TABLE FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = = CPA 0 0 mm GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± = RING SEAL 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:44:52 16 D MATERIAL COLOR PLR, SHRT. BAR LIFTER 17 E SPS/NYLON GF20 SPS/NYLON GF20 18 M SALEABLE BLACK 2021/08/27 1 SALEABLE SALEABLE SALEABLE SALEABLE HOUSING KEYING OPTION C RELEASE DATE 2 L HOUSING KEY A CPA 3 BOM SHEET 2 A R 4 SALEABLE SALEABLE CPA COMPONENT PS B 5 6 SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE CPA CPA TABLE LEGEND D 2 2 7 8 M CPA M CPA E ABREVIATION 9 PS M GCO D GCO GCO C D GCP C GCP 33471-0476 33471-0448 33471-0447 33471-0446 33471-0445 33471-0444 33471-0443 33471-0442 33471-0441 11 C 33471-0479 33471-0478 33471-0477 33471-0467 33471-0466 33471-0465 33471-0464 33471-0463 33471-0462 33471-0461 33471-0460 33471-0459 33471-0458 33471-0457 33471-0456 33471-0455 33471-0454 33471-0453 33471-0452 33471-0451 33471-0450 33471-0449 ASSEMBLY DESCRIPTION 13 33471-0480 33471-0475 33471-0474 33471-0473 33471-0472 33471-0471 33471-0470 33471-0469 33471-0468 VOID KEY KEY A, BLACK KEY A W/ SHRT. BAR, BLACK KEY D W/ SHRT. BAR, GREEN VOID KEY KEY D W/ SHRT. BAR, GREEN KEY C W/ SHRT. BAR, BROWN KEY B W/ SHRT. BAR, LT. GRAY KEY A W/ SHRT. BAR, BLACK KEY A W/ SHRT. BAR, BLACK VOID KEY KEY D W/ CPA & SHRT. BAR, GREEN KEY C W/ CPA & SHRT. BAR, BROWN KEY B W/ CPA & SHRT. BAR, LT. GRAY KEY A W/ CPA & SHRT. BAR, BLACK VOID KEY KEY D, GREEN KEY C, BROWN KEY B, LT. GRAY KEY A, BLACK H 14 15 14 13 12 11 10 9 8 7 MX150 1X4 RECEPTACLE SEALED ASSEMBLY MAT SEAL EC NO: 674870 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: VKOSHY THIRD ANGLE PROJECTION 6 2021/08/23 2021/08/27 2021/08/27 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2010/03/31 2010/04/06 DRAWING SERIES D-SIZE 33471 5 SD-33471-041 MATERIAL NUMBER GENERAL MARKET 3 W6 SHEET NUMBER CUSTOMER SEE BOM 4 PSD 002 2 5 OF 6 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M BOM SHEET 3 L L K K J J W6 H G KEY A W/ CPA, BLACK KEY A W/ CPA, BLACK KEY A , BLACK KEY B, LT.GRAY KEY A W/ CPA, BLACK KEY A W/ CPA & SHRT. BAR, YELLOW KEY A W/ CPA, YELLOW KEY A W/ CPA, BLACK KEY A , BLACK KEY D W/ SHRT. BAR, STONE GRAY 33471-0497 33471-0496 33471-0495 33471-0494 33471-0493 33471-0492 KEY D W/ SHRT. BAR, STONE GRAY KEY C W/ SHRT. BAR, DARK GRAY KEY D W/ CPA & SHRT. BAR, STONE GRAY KEY C W/ CPA & SHRT. BAR, DARK GRAY KEY D, STONE GRAY KEY C, DARK GRAY 33471-0487 33471-0486 33471-0485 33471-0491 33471-0490 33471-0489 33471-0488 KEY D W/ SHRT. BAR, STONE GRAY M CPA M CPA M M M CPA PS M CPA P M CPA P M CPA M P PS M PS M PS M PS M CPA PS M CPA M P P M PS M GCP GCP GCP GCP GCP B A P P P P P A GCO A GCO GCP GCP GCP GCP GCP A A D D C D D C A B C D C C GCO GCO C 33471-0484 33471-0483 33471-0482 33471-0481 ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION A A A GCP GCP GCO D D A GCO GCP GCEO GCEP P PS M CPA 2 3 3 2 3 SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE 4 4 1 2 SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE 3 2 4 1 1 2 2 3 3 4 4 1 1 2 2 3 3 4 4 H SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE 1 2 3 4 BLOCKED TERMINAL G COMMENTS STATUS CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION F F E TABLE LEGEND ABREVIATION D C COMPONENT RING SEAL BURNT ORANGE INHERENTLY LUBRICATED SILICONE CPA BRIGHT RED PBT GF30 MAT SEAL LIGHT BLUE INHERENTLY LUBRICATED SILICONE SHORTING BAR PLR NATURAL SPS/NYLON GF20 STANDARD PLR NATURAL SPS/NYLON GF20 ERGONOMIC GROMMET CAP, PLUGGED BLACK SPS/NYLON GF20 ERGONOMIC GROMMET CAP, OPEN STANDARD GROMMET CAP, PLUGGED BLACK BLACK SPS/NYLON GF20 SPS/NYLON GF20 STANDARD GROMMET CAP, OPEN BLACK SPS/NYLON GF20 HOUSING KEYING OPTION A HOUSING KEYING OPTION D YELLOW STONE GRAY SPS/NYLON GF20 SPS/NYLON GF20 HOUSING KEYING OPTION C DARK GRAY SPS/NYLON GF20 HOUSING KEYING OPTION C BLACK SPS/NYLON GF20 HOUSING KEYING OPTION D GREEN SPS/NYLON GF20 HOUSING KEYING OPTION C BROWN SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 A HOUSING KEY A B HOUSING KEY B HOUSING KEYING OPTION B LIGHT GRAY C HOUSING KEY C HOUSING KEYING OPTION A BLACK D HOUSING KEY D DESCRIPTION GCO GROMMET CAP, STANDARD, OPEN GCP GROMMET CAP, STANDARD, PLUGGED GCEO GROMMET CAP, ERGONOMIC, OPEN GCEP GROMMET CAP, ERGONOMIC, PLUGGED M MAT SEAL P PLR, STANDARD BOM/APPLICABLE COMPONENTS TABLE FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = = R RING SEAL CPA A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 CPA RELEASE DATE 18 2021/08/27 17 0 mm GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± 0 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:44:52 16 0 ANGULAR TOL = B D MATERIAL COLOR PLR, SHRT. BAR LIFTER PS E 15 14 13 12 11 10 9 8 7 MX150 1X4 RECEPTACLE SEALED ASSEMBLY MAT SEAL EC NO: 674870 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: VKOSHY THIRD ANGLE PROJECTION 6 2021/08/23 2021/08/27 2021/08/27 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2010/03/31 2010/04/06 DRAWING SERIES D-SIZE 33471 5 SD-33471-041 MATERIAL NUMBER GENERAL MARKET 3 W6 SHEET NUMBER CUSTOMER SEE BOM 4 PSD 002 2 6 OF 6 1 A