0334710538

20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M TABLE OF CONTENTS L SHEET NO. SHEET DESCRIPTION 1 NOTES AND BOM 2 CONFIGURATIONS 3-4 K DESCRIPTION 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 RECEPTACLE CONNECTOR ASSEMBLY 6 BACKSHELL NOTES 7 BACKSHELL 8 BACKSHELL CONFIGURATIONS MATING INTERFACE/CONNECTOR DRAWINGS DESCRIPTION DRAWING NO. MOLEX INLINE INTERFACE DEFINITION 1X2 PK-31300-635 1X2 *150-S-002-1-Z05 SD-33481-0001 1X6 PK-31300-903 1X6 *150-S-006-1-Z03 SD-33481-0001 L -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR KEY CONFIGURATIONS 5 PACKAGING NOTES: VALID UNLESS OTHERWISE SPECIFIED MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH DEVICE OR CONNECTOR AS SPECIFIED IN THE MATING INTERFACE/CONNECTOR DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESSED AT . K -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION (SEE PLR PRE-LOCK VIEW SHEET 5). b. PRODUCT SPECIFICATION SEE: -STANDARD CONFIGURATION: PS-33471-000 -UL V0 CONFIGURATION: PS-160105-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), J J TERMINALS, WIRE DIAMETER RANGE, PRODUCT VALIDATION, AND PRODUCT DEVIATIONS. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: SEE PACKAGING CHART d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-301 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) H H 2. DESIGN - MATERIALS: 1x2 a. FOR BILL OF MATERIALS SEE: -STANDARD CONFIGURATION SD-33471-0002 -UL V0 CONFIGURATION SD-160105-0002 3. DESIGN - GEOMETRY: a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART WITH THE EXCEPTION OF UNDERLINED DIMENSIONS. DIMENSIONAL INFORMATION NOT SHOWN G G ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. F F f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B). g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR FOR ADDITIONAL INFORMATION SEE SECTION 5 UNDER PROCEDURES IN ES-34735-008. E E D A1 A 2 UPDATE VIEWSETS LAST NUMBER: 11 1 INITIAL RELEASE REV REV DESCRIPTION REMOVED: C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = B 1x6 DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 0 mm 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 ANGULAR TOL = A MINOR GEOMETRY CHANGE FOR UL V0 INSPECTION NUMBER LOG ADDED: 11 D UPDATED THE DRAWING FRAME 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSHI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 1 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION CONFIGURATIONS L L K K J J 1x2 - STD 1x2 - UL V0* H H G G F F E E D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = B 1x6 - STD DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 1x6 - UL V0* RELEASE DATE 18 2020/08/26 17 0 mm 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 ANGULAR TOL = A D *MINOR GEOMETRY DIFFERENCE THAN STANDARD CONFIGUATION SEE NOTES 1 & 2 FOR MORE INFORMATION 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 2 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 SHEET DESCRIPTION M M KEY CONFIGURATIONS 1X2 L L 60° 60° K K KEY A J 35° 60° J H H KEY B 35° 60° G G F F KEY C 35° 35° E E D D KEY D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 3 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M SHEET DESCRIPTION 1X6 KEY CONFIGURATIONS CONT. L L 60° 60° K K KEY A J J 30° 60° H H KEY B G G 30° 60° F F KEY C E E 30° 30° D D KEY D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 4 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 CHARTED DIMENSIONS SHEET DESCRIPTION DIMENSIONS DESCRIPTION RECEPTACLE CONNECTOR ASSEMBLY - STD M A 1X2 19.40 B C D E F 1.75 21.73 20.55 37.65 19.64 L L 1X6 32.75 1.75 35.21 19.90 37.65 N/A N/A 1.75 35.23 19.90 37.65 33.64 1X6 UL V0 *DIM F MAX. *APPLIE TO UL V0 CONFIGURATIONS ONLY K ⌀DIM C MIN PASS-THRU WITH NO CLEARANCE 11 LASER MARKING ON THIS SURFACE TERMINAL Z SEE NOTE 3g. K 2 POSITION 1 X J DIM D MAX J 3 H H 3.50 TYP Z LAST 4X DIM B DIM E MAX X 1 DIM A MAX 5 G TERMINAL POSITION G REAR VIEW (WIRE HARNESS SIDE) MOLD CAVITY I.D. F THIS LOCATION F RECYCLE CODE THIS LOCATION MANUFACTURING LOCATION CODE THIS LOCATION E E D D 2.75±0.50 6 C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION IN FINAL-LOCK POSITION SECTION Z-Z A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 SECTION X-X 2020/08/26 17 15 14 13 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 5 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION BACKSHELL NOTES L L BACKSHELL NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34951-001 -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY SPECIFIED IN MOLEX DRAWING SD-33471-0001. -SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. K K -COMPONENTS ARE OPTIONAL AND MUST BE PURCHASED SEPERATELY. -BACKSHELL DESIGN IS OWNED BY SCHLEMMER. -FOR ADDITIONAL INFORMATION SEE THE BACKSHELL COMPONENT DRAWING SD-34949-0001. J J BACKSHELL (BKS) BACKSHELL CUSTOMER MODEL NUMBER LEGEND 34949-XXXX H H CUSTOMER MODEL COMPONENTS 0 - BACKSHELL ONLY 1 - BACKSHELL & MX150 HOUSING KEY A ASSEMBLY 2 - BACKSHELL & MX150 HOUSING KEY B ASSEMBLY 3 - BACKSHELL & MX150 HOUSING KEY C ASSEMBLY 4 - BACKSHELL & MX150 HOUSING KEY D ASSEMBLY 1X2 BACKSHELL FEATURES 1 - WITH RIBS 2 - WITHOUT RIBS G RECEPTACLE SEALED ASSEMBLY G MX150 CIRCUIT SIZE 02, 03, 04, 05, 06 F F E E D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 6 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION BACKSHELL L L W K K J J W H H G G 11.00 1.50 F F 10.70 6.50 E E Partial W-W SCALE 4:1 D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 7 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M SHEET DESCRIPTION CHARTED DIMENSIONS BACKSHELL CONFIGURATIONS DESCRIPTION DIMENSIONS 1X2 G 26.00 L L K K J J (71.20) ⌀DIM G MIN PASS-THRU WITH NO CLEARANCE H H G G F F E E RECEPTACLE SEALED ASSEMBLY WITH RECEPTACLE BACKSHELL D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 8 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M TABLE OF CONTENTS L NOTES: VALID UNLESS OTHERWISE SPECIFIED SHEET NO. SHEET DESCRIPTION 1 NOTES 2 KEY CONFIGURATIONS 3 RECEPTACLE SEALED ASSEMBLY 4 BOM 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH DEVICE CONNECTION AS SPECIFIED IN DRAWING EWCAP 150-S-005-1-Z03, AVAILIBLE AT . -DESIGNED TO MATE WITH BLADE SEALED ASSEMBLY AS SPECIFIED IN DRAWING SD-33481-051 -FOR 1.5mm RECEPTACLE TERMINALS TO BE USED WITH THIS ASSEMBLY. SEE MOLEX DRAWING SD-33012-002. -SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. -ASSEMBLY SHIPPED WITH PLR AND CPA IN PRE-LOCK POSITION (SEE SECTION Z-Z PRE-LOCK). -IN THE EVENT THAT THE PLR IS FOUND IN THE SEATED (FINAL LOCK) POSITION, REFER TO MOLEX SPECIFICATION PS-34646-001, AVAILABLE AT www.molex.com . -ASSEMBLY CONFORMS TO SAE/USCAR-2 REV.4 WITH THE FOLLOWING EXCEPTIONS: ENGAGEMENT FORCE TO MOVE CPA FROM PRE-LOCK TO FINAL LOCK POSITION WHEN UNMATED: 40N MIN. DISENGAGEMENT FORCE TO MOVE CPA FROM FINAL LOCK TO PRE-LOCK POSITION: 3N MIN, 40N MAX TERMINAL INSERTION FORCE FOR WIRE DIAMETER ABOVE 2.5mm NOT EXCEEDING 2.69mm SHALL NOT EXCEED 40 NEWTONS. b. PRODUCT SPECIFICATION SEE: PS-33471-000 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-903 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) K CPA OPTIONAL SEE BOM J GROMMET CAP CONNECTOR HOUSING FOR OPTIONS SEE BOM H L K J H 2. DESIGN - MATERIALS: a. SEE BOM TABLE MAT SEAL 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) g. LASER MARKING: TBD G PRIMARY LOCK REINFORCEMENT (PLR) F G F RING SEAL E M8 UPDATED THE DRAWING FRAME M7 ADD NEW P/N 33471-0542 E CHANGE THE STATUS TO SALEABLE FROM M6 TOOLED BUT NOT VALIDATED FOR DK GREY AND ST GREY UPDATE 33471-0503 33471-0504 M5 D M4 PRODUCTION STATUS UPDATED SHEET 3 NOMENCLATURE M3 M2 M1 UPDATED PACKAGING DIMENSIONS UPDATED COMPONENT BOM UPDATED WIRE DIAMETER RANGE M UPDATED NOTE 1c L UPDATE PER PRODUCTION DESIGN REV C D DESCRIPTION FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = PER DRAWING REVISION: M3 LAST BALLOON NUMBER USED: 4 ADDED BALLOON NUMBERS: 1a, 2a DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 16 15 14 13 12 11 0 mm 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS REMOVED BALLOON NUMBERS: 07:23:57 0 ANGULAR TOL = INSPECTION BALLOON NUMBER LOG B A 33471-0508 33471-0509 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: MDICK APPR: VKOSHY THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2012/06/01 2012/06/01 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-051 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 M8 SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X5 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 1 OF 5 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M KEY CONFIGURATIONS 60° 60° L L K K KEY A J J 25° 60° H H G G KEY B 25° 60° F F E E KEY C D D 25° 25° C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = KEY D A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 15 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:57 16 0 mm ANGULAR TOL = B 0 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: MDICK APPR: VKOSHY THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2012/06/01 2012/06/01 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-051 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 M8 SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X5 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 2 OF 5 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M RECEPTACLE SEALED ASSEMBLY L LASER MARKING ON THIS SURFACE Z Y SEE NOTE 3g. ⌀32.45 12.20MAX L MIN PASS THRU WITH NO CLEARANCE 1 K K 8.50MAX 1a J J Y 4X3.50 TERMINAL POSITION 1 TERMINAL POSITION 5 37.56MAX 16.20MAX 3 16.20MAX 2 Z 2a REAR VIEW (WIRE HARNESS SIDE) H H MOLD CAVITY CODE G G RECYCLE CODE LOCATION CODE F F TERMINAL POSITION E E 4 D D 2.75±0.50 C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = B PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION IN FINAL-LOCK POSITION SECTION Z-Z A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 SECTION Y-Y 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:57 16 0 mm ANGULAR TOL = PRIMARY LOCK REINFORCEMENT (PLR) SHOWN 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: MDICK APPR: VKOSHY THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2012/06/01 2012/06/01 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-051 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 M8 SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X5 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 3 OF 5 1 A 20 19 18 17 16 M 15 KEY A W/ CPA, BLACK KEY D W/ CPA, STONE GRAY KEY C W/ CPA, DARK GRAY KEY D, STONE GRAY KEY C, DARK GRAY KEY A W/ CPA, BLACK VOID KEY KEY D, GREEN KEY C, BROWN KEY B, LIGHT GRAY KEY A, BLACK VOID KEY KEY D W/ CPA, GREEN KEY C W/ CPA, BROWN KEY B W/ CPA, LIGHT GRAY KEY A W/ CPA, BLACK VOID KEY KEY D, GREEN KEY C, BROWN KEY B, LIGHT GRAY KEY A, BLACK L K J VOID KEY KEY D W/ CPA, GREEN KEY C W/ CPA, BROWN KEY B W/ CPA, LIGHT GRAY KEY A W/ CPA, BLACK VOID KEY KEY D, GREEN KEY C, BROWN KEY B, LIGHT GRAY KEY A, BLACK H VOID KEY KEY D W/ CPA, GREEN KEY C W/ CPA, BROWN KEY B W/ CPA, LIGHT GRAY KEY A W/ CPA, BLACK VOID KEY KEY D, GREEN KEY C, BROWN KEY B, LIGHT GRAY KEY A, BLACK G F ASSEMBLY DESCRIPTION 14 33471-0541 33471-0540 33471-0539 33471-0538 33471-0537 33471-0536 33471-0535 33471-0534 33471-0533 33471-0532 33471-0531 33471-0530 33471-0529 33471-0528 33471-0527 33471-0526 33471-0525 33471-0524 33471-0523 33471-0522 33471-0521 33471-0520 33471-0519 33471-0518 33471-0517 33471-0516 33471-0515 33471-0514 33471-0513 33471-0512 33471-0511 33471-0510 33471-0509 33471-0508 33471-0507 33471-0506 33471-0505 33471-0504 33471-0503 33471-0502 33471-0501 ASSEMBLY PART NUMBER 13 12 GCP CPA D GCO CPA GCO CPA C D GCO C GCO GCP CPA A A C A GCP B C A A B C A D D B 1 2 3 C B A B HOUSING KEY B C HOUSING KEY C D HOUSING KEY D GCO GROMMET CAP (OPEN) GCP GROMMET CAP (PLUGGED) M MAT SEAL R RING SEAL P PLR, STANDARD CPA CPA DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 5 4 3 2 SALEABLE 1 BOM SHEET 1 SALEABLE 4 2 2 2 2 2 3 3 3 3 L SALEABLE 4 4 4 4 5 5 5 5 1 1 1 1 5 5 5 5 1 1 1 1 5 5 5 5 5 5 5 5 CPA CPA CPA CPA OBSOLETE OBSOLETE TOOLED BUT NOT VALIDATED SALEABLE K OBSOLETE OBSOLETE TOOLED BUT NOT VALIDATED SALEABLE OBSOLETE OBSOLETE TOOLED BUT NOT VALIDATED J SALEABLE OBSOLETE OBSOLETE TOOLED BUT NOT VALIDATED SALEABLE H OBSOLETE OBSOLETE TOOLED BUT NOT VALIDATED SALEABLE NOT RECOMMENDED USE,PLEASE USE 33471-0540 NOT RECOMMENDED USE,PLEASE USE 33471-0539 G TOOLED BUT NOT VALIDATED SALEABLE GCO C GCO GCO B GCO A A B C D C D GCO GCP CPA 1 2 3 4 BLOCKED TERMINAL D NOT RECOMMENDED USE,PLEASE USE 33471-0538 NOT RECOMMENDED USE,PLEASE USE 33471-0537 TOOLED BUT NOT VALIDATED SALEABLE 5 F COMMENTS STATUS CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION MAT SEAL ROYAL BLUE INHERENTLY LUBRICATED SILICONE RING SEAL ROYAL BLUE INHERENTLY LUBRICATED SILICONE PLR NATURAL CPA RED SPS/NYLON GF20 PBT GF30 BLACK GROMMET CAP (OPEN) BLACK SPS/NYLON GF20 HOUSING KEYING OPTION D STONE GRAY SPS/NYLON GF20 HOUSING KEYING OPTION C HOUSING KEYING OPTION D DARK GRAY GREEN SPS/NYLON GF20 SPS/NYLON GF20 HOUSING KEYING OPTION C BROWN SPS/NYLON GF20 HOUSING KEYING OPTION B LIGHT GRAY HOUSING KEYING OPTION A BLACK E SPS/NYLON GF20 GROMMET CAP (PLUGGED) DESCRIPTION HOUSING KEY A 6 SALEABLE GCP GCP GCP GCP COMPONENT A 7 8 SALEABLE GCP CPA GCP CPA GCP CPA LEGEND TABLE ABREVIATION 5 5 5 5 5 GCO GCO GCO GCO 9 SALEABLE E D 4 GCP CPA D B C CPA CPA CPA CPA GCP GCP GCP GCP D B C A GCP GCP GCP GCP D 10 M 1 1 1 1 GCP GCP GCP D B C A 11 D SPS/NYLON GF20 SPS/NYLON GF20 MATERIAL COLOR BOM/APPLICABLE COMPONENTS TABLE FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = 17 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:57 16 0 mm ANGULAR TOL = 2020/08/26 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: MDICK APPR: VKOSHY THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2012/06/01 2012/06/01 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-051 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 M8 SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X5 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 4 OF 5 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M BOM SHEET 2 L L K K J J H H G G M7 KEY A W/CPA, YELLOW 33471-0542 ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION A B C D C D A GCO CPA A GCO GCP CPA 1 2 3 4 BLOCKED TERMINAL SALEABLE 5 COMMENTS STATUS CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION F F E MAT SEAL ROYAL BLUE INHERENTLY LUBRICATED SILICONE RING SEAL ROYAL BLUE INHERENTLY LUBRICATED SILICONE PLR NATURAL CPA RED SPS/NYLON GF20 PBT GF30 SPS/NYLON GF20 GROMMET CAP (PLUGGED) BLACK GROMMET CAP (OPEN) BLACK SPS/NYLON GF20 HOUSING KEYING OPTION A YELLOW SPS/NYLON GF20 HOUSING KEYING OPTION D STONE GRAY SPS/NYLON GF20 HOUSING KEYING OPTION C HOUSING KEYING OPTION D DARK GRAY GREEN SPS/NYLON GF20 SPS/NYLON GF20 HOUSING KEYING OPTION C BROWN SPS/NYLON GF20 HOUSING KEYING OPTION B LIGHT GRAY HOUSING KEYING OPTION A BLACK DESCRIPTION D E SPS/NYLON GF20 SPS/NYLON GF20 MATERIAL COLOR D BOM/APPLICABLE COMPONENTS TABLE C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:57 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: MDICK APPR: VKOSHY THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2012/06/01 2012/06/01 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-051 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 M8 SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X5 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 5 OF 5 1 A