C21
IF HEADER IS RECESSED INTO A POCKET. THESE DIMENSIONS REPRESENT
THE MINIMUM CLEARANCE REQUIRED FOR THE MATING CONNECTOR SHROUD.
NO PARTING LINE AT THIS LOCATION
60°
60°
10.8 MIN.
1.79 ±0.20
R2.0
1.73
1.73
10.8 MIN.
5°
C21
30°
15.0 MIN.
C11
20.5 MIN.
MIN ALL AROUND FOR
MATING CONNECTION
SHROUD CLEARANCE
C3
D
0.70 ±0.15
ALL AROUND
C4
+0.10
10.75
-0.20
R�6.47�
DETAIL D
SCALE 10:1
+0.10
10.75
-0.20
2.30
C12 ⌖ 0.20 A B
C22
11.0 MIN.
3.00
+0.10
4X 9.30
-0.25
KEYING OPTION A
SCALE 4:1
D
PACKAGING FRAME
C12 ⌖ 0.20 A B
12.90
+0.20
-0.80
AT TANGENT
2.90
40°
C14
SEE DETAIL D
60°
10.50
+0.15
-0.10
C9
C
1.73
C
2X 17.00 MIN
3.50
0.57
STANDARD NOTICE
C8
This drawing, or portions of it are controlled by the Electrical Wiring
Components Application Partnership (EWCAP) a subgroup of the United
States Council for Automotive Research LLC (USCAR LLC).
USCAR is an LLC consisting of members from FCA US LLC, Ford Motor Company
and GM Corporation. Any change to a EWCAP controlled portion of this drawing,
including a revision record change must be approved, in writing, by the
responsible EWCAP representative from each USCAR member company.
Each EWCAP representative authorized to sign for his or her member company
is responsible for obtaining all necessary approvals within that company prior
to signing for the approval of the change.
EWCAP expressly prohibits any party from changing either any EWCAP
controlled portion of this drawing or any associated tooling before
receiving approval, signed by the authorized representatives, of the
USCAR member companies. Reference to the signed change notice must be
entered in the drawing control column.
D3
C
11.16
+0.10
-0.20
10.75
C5 C6
+0.10
-0.20
1.50
ALL AROUND
C7
3.50
D2
C8
'D' C1
10.60
PLANE 1
KEYING OPTION B
SCALE 4:1
17.00
D3 PLANE 2
�0.805�
⌖ 0.20Ⓜ A B AT PLANE 2
⌖ 0.30Ⓜ A B AT PLANE 1 D2
REFER TO EWCAP DWG. NO. EWCAP-001
150-T001
1.50 TERMINAL BLADE CONFIGURATION
A
18.00
40°
60°
C13
SECTION A-A
15.33
C5 ⌓ 0.15 A B
1.73
0.57
B
D4 C20
10.75
+0.10
-0.20
+0.10
-0.20
095
3.00
B
C13 17.83
12.83
2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009
3. 0.25 RADII ON ALL CORNERS SHOWN SHARP.
6.00
4X R5.67 C13
B
CENTER PLANES
ESTABLISHED BY DATUM B
KEYING OPTION C
TERMINAL POSITION 3
TERMINAL POSITION 4
4X 1.75
SCALE 4:1
2X R14.18 C13
15.33
A
2X R30.42
REFER TO EWCAP DWG. NO. EWCAP-001
150-T001
1.50 TERMINAL BLADE CONFIGURATION
2X R12.93
40°
⌢ 0.10 A
0.57
0.57
SECTION C-C C9 C10
SCALE 4:1
B
11.16
SURFACE MUST BE FREE
OF SURFACE DEFECTS AND
C19
PARTING LINES FOR
SEALING ALL AROUND
+0.10
-0.20
A
1.05 ±0.05
⌖ 0.10 A B
KEYING OPTION D
5.50 C16
C2
150-S-004-2-D02
150-S-004-2-C02
150-S-004-2-B02
150-S-004-2-A02
EWCAP P/N
D
C
B
A
BLACK
DK GRAY
LT GRAY
BLACK
MATING CONNECTOR
OPTION
COLOR
095
095
095
095
095
095
095
C19
C18
C17
C16
C15
C14
C13
MOVED NOTE TO SECTION B-B
UPDATED NOTES
ADDED 0.25° MAX DRAFT ANGLE ALL AROUND
ADDED 5.50
ADDED AT TANGENT NOTE
REMOVED DATUM D
ADDED BASIC DIMENSIONS FOR PROFILE CONTROL
095
095
C12 ADDED ⌖ 0.20 A B
C11 DIMENSION TO DATUM A
SEALING SURFACE DIMENSIONS
C10
MOVED TO SECTION C-C
C9 ADDED SECTION C-C
C8 REMOVED 15.20 AND 2.50 FROM SECTION A-A
C7 ADDED DRAFT ANGLE DIRECTION
C6 REMOVED 0.80 +0.10/-0.20 ALL AROUND
REPLACED WALL THICKNESS CONTROL
C5
WITH PROFILE OF A SURFACE
C4 ADDED R(6.47)
C3 ADDED 0.70±0.15 ALL AROUND
C2 UPDATED CONNECTOR COLORS
095
8.
095
095
095
095
C15
C1
B3
B2
B1
A
SURFACE 'D' RELOCATED TO 3.50 WAS AT 8.20
REMOVED EWCAP FROM THE TITLE BLOCK
REMOVED LEGAL NOTICE
ANGEL 40° WAS 60° -4 PLACES (A4-D4)
RELEASED
11. REFER TO USCAR/EWCAP PART LIST AS FOUND ON WEBSITE
http://www.uscarteams.org
TOLERANCES (UNLESS OTHERWISE SPECIFIED)
DIMENSIONS ARE IN
C14
0.25°
C17
MAX DRAFT
.X
12. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA
IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION
NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL.
KB
B
03-26-12
10-31-02
KC
MV
MV
DG
DATE
DWN
CHK
THIRD ANGLE PROJECTION
MILLIMETERS
A
±3°
±0.2
.XX
±0.10
C7
DRAWN BY
SCALE
CONSTRUCTION BELOW THIS SURFACE IS
NOT CONTROLLED BY EWCAP. NO PLASTIC
FEATURES MAY EXTEND ABOVE THIS SURFACE.
4 - 1
M.VANSLAMBROUCK
03-26-12
DIRECT CONNECT INTERFACE
4 WAY (2 X 2) 1.5MM SEALED MALE
SECTION B-B
1
3
DATE
CHECKED BY
K. CUNNINGHAM
TITLE
2
OF
1
REVISION LEVEL
SIZE
DRAWING NUMBER
SHEET
4
MV
04-24-17
CHANGE
SERIAL LET REVISION RECORD
NUMBER
ANGLES
SCALE 4:1
DETAIL E
SCALE 20:1
APPLIES 2X
SEE KEYING OPTION VIEWS
FOR POSITIONS
CORRECTED CHRYSLER GROUP LLC NOMENCLATURE
ADDED LEGAL NOTE AND EWCAP TO TITLE BLOCK
7. EXCEPT WHERE NOTED, DRAFT ON OUTSIDE SURFACES IS PERMISSIBLE
WITHIN TOLERANCE.
10. A FULL SHROUD ON THE MATING CONNECTOR IS REQUIRED
TO INSURE THAT THE CONNECTOR-HEADER POLARIZATION
FEATURES (OPTIONS A THRU D) WILL FUNCTION. THE FULL
SHROUD ALSO PREVENTS SCOOP DAMAGE TO THE HEADER
PINS. REFER TO "SAE/USCAR-12 CONNECTOR DESIGN
GUIDE LINES" FOR ADDITIONAL INFORMATION.
D2 ADDED PLANE 1
ADDED CALL OUT "CENTER PLANES
D1
ESTABLISHED BY DATUM B"
C22 CHANGED ISO VIEW SCALE TO 4:1, WAS 1:1
ADDED PARTING LINE NOTE TO DETAIL A,
C21
REMOVED NOTE BACK ANGLE OPTIONAL FROM 5°
C20
095
095
095
095
SYMBOL INDICATES DRAFT DIRECTION.
UPDATED CALL OUT FOR THE REVISION OF GD&T
FROM ASME Y14.5-1994 TO Y14.5-2009
UPDATED THE STANDARD NOTICE TO
D4
THE LATEST TEMPLATE
D3 ADDED PLANE 2
D5
095
095
AT TANGENT
+0.10
-0.20
5. STANDARD COLORS FOR POLARIZATION (SEE CHART).
DEVIATION REQUIRES APPROVAL OF AUTHORIZED PERSON.
9. FOR TERMINAL MATERIAL, DIMENSIONAL, AND COATING REQUIREMENTS
AND ANY BLADE TERMINAL DESIGN INFORMATION NOT SHOWN ON THIS
DRAWING SEE EWCAP DRW. NO. EWCAP-001
�2.90�
11.16
4. UNSPECIFIED RADII: 0.25 EXCEPT AS NOTED.
6. REFER TO "SAE/USCAR 12 CONNECTOR GUIDELINES"
FOR ADDITIONAL REQUIREMENTS.
�1.20�
⌖ 0.30Ⓜ A B
4X R4.42
40°
D5
2X R31.68 C13
D1
132
095
NOTES: UNLESS OTHERWISE SPECIFIED C18
1. ALL DIMENSIONS SHOWN IN MILLIMETERS.
11.16
132
132
TERMINAL POSITION 2
SEE DETAIL E
B
132
132
A
TERMINAL POSITION 1
C
150-S-004-2-Z02
1
E
DO NOT SCALE DRAWING
COMPUTER AIDED DRAWING
D
18
17
16
15
14
TABLE OF CONTENTS
L
SHEET NO.
SHEET DESCRIPTION
1
NOTES AND BOM
2
CONFIGURATIONS
3-4
KEY CONFIGURATIONS
13
12
11
10
9
7
8
4
3
2
1
MATING INTERFACE/CONNECTOR DRAWINGS
NOTES: VALID UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING NO.
DESCRIPTION
INTERFACE DEFINITION
MOLEX INLINE
2X2
PK-31300-635
STANDARD 2X2
*150-S-004-2-Z02
SD-33482-0001
-CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY,
2X3
PK-31300-903
UL V0 2X2
*150-S-004-2-Z02
SD-33482-0001
CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR
2X4
PK-31300-903
STANDARD 2X3
*150-S-006-2-Z02
SD-33482-0001
2X6
PK-31300-903
TRANSMISSION 2X3
*150-S-006-2-Z02
N/A
2X8
PK-31300-903
STANDARD 2X4
*150-S-008-2-Z02
SD-33482-0001
2X10
PK-31300-903
UL V0 2X4
*150-S-008-2-Z02
SD-33482-0001
STANDARD 2X6
*150-S-012-2-Z01
SD-33482-0001
UL V0 2X6
*150-S-012-2-Z01
SD-33482-0001
-STANDARD CONFIGURATION (STD): PS-33472-000
STANDARD 2X8
*150-S-016-2-Z01
SD-33482-0001
-TRANSMISSION CONFIGURATION (TRNS):
STANDARD 2X10
SD-33472-0001
SD-33482-0001
UL V0 2X10
SD-33472-0001
SD-33482-0001
1. GENERAL:
L
a. APPLICATION SPECIFICATION SEE: AS-33472-100
MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY
K
5
6
5
RECEPTACLE CONNECTOR ASSEMBLY
6
BACKSHELL NOTES
7
BACKSHELL
8
BACKSHELL CONFIGURATIONS
9
2X10 CONNECTOR INTERFACE DEFINITION
CHECKING, CRIMPING, AND TROUBLESHOOTING.
-DESIGNED TO MATE WITH DEVICE OR CONNECTOR AS SPECIFIED
IN THE MATING INTERFACE/CONNECTOR DRAWINGS CHART.
*DENOTES DRAWINGS THAT CAN BE ACCESSED AT .
-ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION
(SEE PLR PRE-LOCK VIEW SHEET 5).
K
b. PRODUCT SPECIFICATION SEE:
CONTAINS SILICONE: TS-160038-0001
J
SILICONE FREE: TBD
J
-UL V0 CONFIGURATION (UL V0): TBD
CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY,
RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY),
TERMINALS, WIRE DIAMETER RANGE, PRODUCT VALIDATION, AND PRODUCT DEVIATIONS.
c. PACKAGING SPECIFICATION PER MOLEX DRAWING: SEE PACKAGING CHART
d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR
PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-301
H
H
e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS
(COMPANY ID#13255)
2x2
2. DESIGN - MATERIALS:
a. FOR BILL OF MATERIALS SEE:
-STANDARD CONFIGURATION SD-33472-0002
-TRANSMISSION CONGURATION
G
G
CONTAINS SILICONE: SD-160038-0002
SILICONE FREE: SD-160092-0002
-UL V0 CONFIGURATION SD-160074-0002
C2
ADDED MOLEX BACKSHELL DETAILS
C1
C1
ADDED 2X6-TRNS.-WITH/WITHOUT CLIPSLOT *
C
C
ADDED 2X10-STD.-WITH CLIPSLOT *
B3
ADD ROW FOR 2X6 V0 ON SHEET 5DIM3#
UPDATE TO 25.0 MAX FOR V0DIM11#
UPDATE TO 33.85 MAX FOR V0
B2
ADD 2X6 UL V0 CONFIGURATIONS
B1
UPDATE 2X6 W/O CLIPSLOT DIM G ON
TABLE OF SHEET 5
b. TRANSMISSION CONNECTOR COMPONENTS MUST MEET THE MATERIAL REQUIREMENTS
SPECIFIED IN TS-160038-0001 & TBD
2x3
3. DESIGN - GEOMETRY:
F
F
a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART
WITH THE EXCEPTION OF UNDERLINED DIMENSIONS. DIMENSIONAL INFORMATION NOT SHOWN
ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION.
b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009
c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715
d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX.
e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD.
E
B
THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION,
2x4
B
AND CUSTOMER MATERIAL NUMBER.
ADDED 2X2 - STD- WITH CLIPSLOT,
2X8 - STD- WITH CLIPSLOT
AND NOTE h
E
A11
MINOR GEOMETRY CHANGE FOR UL V0
g. LASER MARKING:
A10
UPDATED 2X4 DRAWING NUMBER
1. PART NUMBER
A9
UPDATED 2X10 PART NUMBERS
A8
UPDATED 2X3 DRAWING NUMBER
A7
UPDATED 2X10 INTERFACE
A6
ADDED TRANSMISSION REFERENCES
A5
ADD 2X10 INTERFACE SHEETS
A4
ADD UL V0 CONFIGURATIONS
A3
ADDED 2X3 STD AND TRANSMISSION
A2
UPDATED 2X8 BLD DRAWINGS
A1
FIXED TYPO IN NOTE 1a, UPDATED 2X6
MOLEX INLINE BLADE DRAWING
A
INITIAL RELEASE
REV
REV DESCRIPTION
f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B).
2. DAY OF THE YEAR
3. SHIFT
4. YEAR
D
FOR ADDITIONAL INFORMATION SEE SECTION 5 UNDER PROCEDURES IN ES-34735-008.
B
h. 2X2 CLIP-SLOT DESIGN IS BASED ON USCAR/EWCAP 7mm CLIP SLOT EWCAP - 005 - 7
2X3 THRU 2X10 CLIP-SLOT DESIGN IS BASED ON USCAR/EWCAP 11mm CLIP SLOT EWCAP - 005 - 11
2x6
C
INSPECTION NUMBER LOG
LAST NUMBER: 11
ADDED: 11
REMOVED:
SYMBOLS
2x8
B
= 0
= 0
= 0
FORMAT: master-tb-prod-A1
REVISION: H
DATE: 2017/10/06
18
P1
RELEASE DATE
17
16
2018/02/16
22:02:25
15
14
13
12
11
10
9
8
7
1:1
CURRENT REV DESC:
B
GENERAL TOLERANCES
(UNLESS SPECIFIED)
4 PLACES
±
= 0
3 PLACES
±
= 0
2 PLACES
±
0.1
1 PLACE
±
0.2
0 PLACES
±
= 0
C
mm
= 0
= 0
2x10
SCALE
±
= 0
C
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS
ANGULAR TOL
A
DOCUMENT STATUS
D
1.0 °
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
6
EC NO: 171650
DRWN: DDEB
CHK'D: MVANSLAMBROU
APPR: MVANSLAMBROU
INITIAL REVISION:
DRWN: APROFFITT
APPR: VKOSHY
THIRD ANGLE PROJECTION
5
2018/01/19
2018/02/16
2018/02/16
PRODUCT CUSTOMER DRAWING
DOC TYPE DOC PART REVISION
DOCUMENT NUMBER
A
2014/05/14
2014/06/27
DRAWING
SERIES
A1-SIZE
33472
4
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
SD-33472-0001
MATERIAL NUMBER
PSD 001
CUSTOMER
GENERAL MARKET
3
2
C2
SHEET NUMBER
1 OF 11
1
18
17
16
15
14
13
12
11
10
9
7
8
5
6
4
3
2
1
SHEET DESCRIPTION
L
L
CONFIGURATIONS
B
K
K
2X2 - STD.
2X2 - STD. - WITH CLIPSLOT *
2X2 - TRNS. - SILICONE FREE †
† 2X2 - UL V0
2X2 - STD. - LENGTHENED
J
J
H
H
2X3 - STD.
2X3 - STD. - WITH CLIPSLOT *
2X3 - TRNS. - CONTAINS SILICONE †
G
G
F
F
2X4 - STD.
2X4 - STD. - WITH CLIPSLOT *
† 2X4 - UL V0
† 2X4 - UL V0-WITH CLIPSLOT*
E
E
2X6 - STD. - WITH CLIPSLOT *
2X6 - STD.
D
C1
C1
† 2X6 - TRNS.
† 2X6 - UL V0
D
† 2X6 - TRNS. - WITH CLIPSLOT *
B
* WITH CLIPSLOT CONFIGURATION DOES NOT
C
C
MEET THE USCAR PACKAGING FRAME REQUIREMENTS
† MINOR GEOMETRY DIFFERENCE THAN STANDARD CONFIGURATION
SEE NOTES 1a & 2a-b FOR MORE INFORMATION
2X8 - STD. - WITH CLIPSLOT *
2X8 - STD.
SYMBOLS
B
C
= 0
= 0
= 0
2X10 - STD. - WITH CLIPSLOT *
DOCUMENT STATUS
FORMAT: master-tb-prod-A1
REVISION: H
DATE: 2017/10/06
18
P1
RELEASE DATE
17
16
2018/02/16
15
14
13
12
11
10
9
8
7
CURRENT REV DESC:
B
GENERAL TOLERANCES
(UNLESS SPECIFIED)
4 PLACES
±
= 0
3 PLACES
±
= 0
2 PLACES
±
= 0
C
1:1
= 0
= 0
22:02:25
mm
±
= 0
† 2X10 - UL V0
SCALE
ANGULAR TOL
A
2X10 - STD.
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS
1 PLACE
±
0 PLACES
±
1.0 °
0.1
0.2
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
6
EC NO: 171650
DRWN: DDEB
CHK'D: MVANSLAMBROU
APPR: MVANSLAMBROU
INITIAL REVISION:
DRWN: APROFFITT
APPR: VKOSHY
THIRD ANGLE PROJECTION
5
2018/01/19
2018/02/16
2018/02/16
PRODUCT CUSTOMER DRAWING
DOC TYPE DOC PART REVISION
DOCUMENT NUMBER
2014/05/14
2014/06/27
DRAWING
SERIES
A1-SIZE
33472
4
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
SD-33472-0001
MATERIAL NUMBER
PSD 001
CUSTOMER
GENERAL MARKET
3
2
C2
SHEET NUMBER
2 OF 11
1
A
18
17
16
15
14
13
12
11
10
9
7
8
5
6
4
3
2
1
SHEET DESCRIPTION
KEY CONFIGURATIONS
L
2X2
60°
2X3
60°
L
2X4
60°
60°
60°
60°
K
K
J
J
KEY A
KEY A
40°
60°
KEY A
25°
60°
25°
60°
H
H
G
G
KEY B
40°
KEY B
KEY B
25°
25°
60°
60°
60°
F
F
E
E
KEY C
KEY C
40°
40°
25°
KEY C
25°
25°
25°
D
D
C
C
KEY D
KEY D
KEY D
SYMBOLS
B
= 0
= 0
= 0
FORMAT: master-tb-prod-A1
REVISION: H
DATE: 2017/10/06
18
17
16
2018/02/16
22:02:25
15
14
13
12
11
10
9
8
7
CURRENT REV DESC:
B
GENERAL TOLERANCES
(UNLESS SPECIFIED)
4 PLACES
±
= 0
3 PLACES
±
= 0
2 PLACES
±
= 0
C
1:1
= 0
= 0
RELEASE DATE
mm
±
= 0
P1
SCALE
ANGULAR TOL
A
DOCUMENT STATUS
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS
1 PLACE
±
0 PLACES
±
1.0 °
0.1
0.2
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
6
EC NO: 171650
DRWN: DDEB
CHK'D: MVANSLAMBROU
APPR: MVANSLAMBROU
INITIAL REVISION:
DRWN: APROFFITT
APPR: VKOSHY
THIRD ANGLE PROJECTION
5
2018/01/19
2018/02/16
2018/02/16
PRODUCT CUSTOMER DRAWING
DOC TYPE DOC PART REVISION
DOCUMENT NUMBER
2014/05/14
2014/06/27
DRAWING
SERIES
A1-SIZE
33472
4
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
SD-33472-0001
MATERIAL NUMBER
PSD 001
CUSTOMER
GENERAL MARKET
3
2
C2
SHEET NUMBER
3 OF 11
1
A
18
17
16
15
14
13
12
11
10
9
7
8
5
6
4
3
2
1
SHEET DESCRIPTION
KEY CONFIGURATIONS CONT.
L
2X6
60°
2X10
2X8
60°
60°
60°
60°
L
60°
K
K
J
J
KEY A
KEY A
25°
25°
25°
60°
KEY A
60°
60°
H
H
G
G
KEY B
KEY B
25°
25°
25°
F
KEY B
60°
60°
60°
F
E
E
KEY C
KEY C
KEY C
D
25°
25°
25°
25°
25°
D
25°
C
C
KEY D
KEY D
SYMBOLS
B
= 0
= 0
= 0
FORMAT: master-tb-prod-A1
REVISION: H
DATE: 2017/10/06
18
17
16
2018/02/16
22:02:25
15
14
13
12
11
10
9
8
7
1:1
CURRENT REV DESC:
B
GENERAL TOLERANCES
(UNLESS SPECIFIED)
4 PLACES
±
= 0
3 PLACES
±
= 0
2 PLACES
±
= 0
C
mm
= 0
= 0
RELEASE DATE
SCALE
±
= 0
P1
DIMENSION UNITS
ANGULAR TOL
A
DOCUMENT STATUS
KEY DTECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC
1 PLACE
±
0 PLACES
±
1.0 °
0.1
0.2
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
6
EC NO: 171650
DRWN: DDEB
CHK'D: MVANSLAMBROU
APPR: MVANSLAMBROU
INITIAL REVISION:
DRWN: APROFFITT
APPR: VKOSHY
THIRD ANGLE PROJECTION
5
2018/01/19
2018/02/16
2018/02/16
PRODUCT CUSTOMER DRAWING
DOC TYPE DOC PART REVISION
DOCUMENT NUMBER
2014/05/14
2014/06/27
DRAWING
SERIES
A1-SIZE
33472
4
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
SD-33472-0001
MATERIAL NUMBER
PSD 001
CUSTOMER
GENERAL MARKET
3
2
C2
SHEET NUMBER
4 OF 11
1
A
18
17
16
15
14
13
12
11
10
9
7
8
5
6
4
2
1
CHARTED DIMENSIONS
SHEET DESCRIPTION
L
3
RECEPTACLE CONNECTOR ASSEMBLY
A
B
C
D
E
F
G
2X2 W/O CLIPSLOT
18.58
1.75
25.45
24.81
37.65
N/A
2.75±0.50
2X2 W/ CLIPSLOT
18.58
1.75
27.65
24.81
37.65
N/A
2.75±0.50
2X2 LENGTHENED
18.58
1.75
25.45
24.81
42.25
N/A
2.75±0.50
2X3 W/ CLIPSLOT
22.25
3.5
30.50
N/A
37.65
27.96
4.0±0.4
2X3 W/O CLIPSLOT
22.25
3.5
26.24
24.90
37.65
N/A
4.0±0.4
2X4 W/ CLIPSLOT
25.75
1.75
31.50
N/A
37.65
28.00
2.75±0.50
27.04
2X4 W/O CLIPSLOT
25.75
1.75
29.19
24.81
37.65
N/A
2.75±0.50
27.04
2X6 W/ CLIPSLOT
32.75
1.75
35.58
N/A
37.65
27.76
2.75±0.50
2X6 W/O CLIPSLOT
32.75
1.75
35.58
24.90
37.65
N/A
2.75±0.50
32.95
2X6 W/O CLIPSLOT V0
32.75
1.75
35.58
25.0
37.65
N/A
2.75±0.50
33.85
2X8 W/O CLIPSLOT
39.80
1.75
42.25
24.90
37.65
N/A
4.0±0.4
2X8 W/ CLIPSLOT
39.80
1.75
42.25
N/A
37.65
27.80
4.0±0.4
2X10 W/O CLIPSLOT
46.75
1.75
49.95
24.90
37.65
N/A
2.75±0.50
2X10 W/ CLIPSLOT
46.75
1.75
49.95
N/A
37.65
27.80
2.75±0.50
MIN PASS-THRU
WITH NO CLEARANCE
K
*DIM J MAX.
* APPLIES TO UL-V0 CONFIGURATIONS ONLY
11
J
B
DIMENSIONS
DESCRIPTION
⌀DIM C
APPLIES TO 2X2 - STD. - WITH CLIPSLOT ONLY
L
J
20.04
K
48.04
⌀DIM C
MIN PASS-THRU
J
WITH NO CLEARANCE
2
LASER MARKING ON THIS SURFACE
TERMINAL
SEE NOTE 3g.
POSITION 1
H
H
DIM D MAX
3
G
G
LAST
TERMINAL
DIM E MAX
3.50 TYP
POSITION
1
4X DIM B
REAR VIEW
DIM A MAX.
5
(WIRE HARNESS SIDE)
F
F
MOLD CAVITY I.D.
THIS LOCATION
RECYCLE CODE
THIS LOCATION
E
E
MANUFACTURING LOCATION
CODE THIS LOCATION
9 11.00
4 DIM F MAX
10
2.00
D
D
6.60
7
C
15.00
8
Partial X-X
DIM G
C
SCALE 3:1
6
SYMBOLS
B
= 0
= 0
= 0
PRIMARY LOCK REINFORCEMENT (PLR) SHOWN
A
PRIMARY LOCK REINFORCEMENT (PLR) SHOWN
IN PRE-STAGED POSITION
IN FINAL-LOCK POSITION
SECTION Y-Y
DOCUMENT STATUS
FORMAT: master-tb-prod-A1
REVISION: H
DATE: 2017/10/06
18
P1
RELEASE DATE
17
16
2018/02/16
15
14
13
12
11
10
9
8
7
1:1
CURRENT REV DESC:
B
GENERAL TOLERANCES
(UNLESS SPECIFIED)
= 0
4 PLACES
±
= 0
3 PLACES
±
= 0
2 PLACES
±
0.1
1 PLACE
±
0.2
0 PLACES
±
= 0
C
mm
±
= 0
22:02:25
SCALE
ANGULAR TOL
= 0
SECTION Z-Z
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS
1.0 °
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
6
EC NO: 171650
DRWN: DDEB
CHK'D: MVANSLAMBROU
APPR: MVANSLAMBROU
INITIAL REVISION:
DRWN: APROFFITT
APPR: VKOSHY
THIRD ANGLE PROJECTION
5
2018/01/19
2018/02/16
2018/02/16
PRODUCT CUSTOMER DRAWING
DOC TYPE DOC PART REVISION
DOCUMENT NUMBER
A
2014/05/14
2014/06/27
DRAWING
SERIES
A1-SIZE
33472
4
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
SD-33472-0001
MATERIAL NUMBER
PSD 001
CUSTOMER
GENERAL MARKET
3
2
C2
SHEET NUMBER
5 OF 11
1
18
17
16
15
14
13
12
11
10
9
7
8
5
6
4
3
2
1
SHEET DESCRIPTION
BACKSHELL NOTES
L
L
BACKSHELL NOTES: VALID UNLESS OTHERWISE SPECIFIED
1. GENERAL:
a. APPLICATION SPECIFICATION SEE: AS-34951-001
-DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY
SPECIFIED IN MOLEX DRAWING SD-33472-0001.
-SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm.
-COMPONENTS ARE OPTIONAL AND MUST BE PURCHASED SEPERATELY.
-DESIGN IS OWNED BY SCHLEMMER FOR SCHLEMMER BACKSHELL.
K
K
-DESIGN IS OWNED BY MOLEX FOR MOLEX BACKSHELL.
-90° ADAPTOR DESIGN IS OWNED BY MOLEX.
-FOR ADDITIONAL INFORMATION SEE THE BACKSHELL COMPONENT DRAWING SD-34951-0001.
2X3
J
J
BACKSHELL CUSTOMER
MODEL NUMBER LEGEND
34951-XXXX
H
90° ADAPTOR
CUSTOMER MODEL COMPONENTS
0 - SCHLEMMER BACKSHELL ONLY
1 - SCHLEMMER BACKSHELL & MX150 HOUSING KEY A ASSEMBLY
2 - SCHLEMMER BACKSHELL & MX150 HOUSING KEY B ASSEMBLY
3 - SCHLEMMER BACKSHELL & MX150 HOUSING KEY C ASSEMBLY
4 - SCHLEMMER BACKSHELL & MX150 HOUSING KEY D ASSEMBLY
5 - MOLEX BACKSHELL ONLY
6 - MOLEX BACKSHELL & MX150 HOUSING KEY A ASSEMBLY
7 - MOLEX BACKSHELL & MX150 HOUSING KEY B ASSEMBLY
8 - MOLEX BACKSHELL & MX150 HOUSING KEY C ASSEMBLY
9 - MOLEX BACKSHELL & MX150 HOUSING KEY D ASSEMBLY
2X4
G
G
BACKSHELL FEATURES
1 - WITH RIBS
2 - WITHOUT RIBS
3 - 90° ADAPTOR
2X4
H
BACKSHELL (BKS)
MX150 CIRCUIT SIZE 04, 06, 08, 12, 16, 20
F
F
RECEPTACLE SEALED ASSEMBLY
E
E
2X6
SCALE 2:1
D
D
C
C
2X8
SYMBOLS
B
= 0
= 0
= 0
FORMAT: master-tb-prod-A1
REVISION: H
DATE: 2017/10/06
18
P1
RELEASE DATE
17
16
22:02:25
15
14
13
12
11
10
9
8
7
CURRENT REV DESC:
B
GENERAL TOLERANCES
(UNLESS SPECIFIED)
4 PLACES
±
= 0
3 PLACES
±
= 0
2 PLACES
±
= 0
C
1.5:1
= 0
= 0
2018/02/16
mm
±
= 0
DOCUMENT STATUS
SCALE
ANGULAR TOL
A
2X10
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS
1 PLACE
±
0 PLACES
±
1.0 °
0.1
0.2
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
6
EC NO: 171650
DRWN: DDEB
CHK'D: MVANSLAMBROU
APPR: MVANSLAMBROU
INITIAL REVISION:
DRWN: APROFFITT
APPR: VKOSHY
THIRD ANGLE PROJECTION
5
2018/01/19
2018/02/16
2018/02/16
PRODUCT CUSTOMER DRAWING
DOC TYPE DOC PART REVISION
DOCUMENT NUMBER
2014/05/14
2014/06/27
DRAWING
SERIES
A1-SIZE
33472
4
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
SD-33472-0001
MATERIAL NUMBER
PSD 001
CUSTOMER
GENERAL MARKET
3
2
C2
SHEET NUMBER
6 OF 11
1
A
18
17
16
15
14
13
12
11
10
9
7
8
5
6
4
3
2
1
SHEET DESCRIPTION
SCHLEMMER BACKSHELL
L
L
K
K
J
J
H
H
V
V
G
G
F
F
11.00
E
E
1.50
6.50
D
10.70
D
Partial V-V
SCALE 4:1
C
C
SYMBOLS
B
= 0
= 0
= 0
FORMAT: master-tb-prod-A1
REVISION: H
DATE: 2017/10/06
18
17
16
2018/02/16
22:02:25
15
14
13
12
11
10
9
8
7
CURRENT REV DESC:
B
GENERAL TOLERANCES
(UNLESS SPECIFIED)
4 PLACES
±
= 0
3 PLACES
±
= 0
2 PLACES
±
= 0
C
4:1
= 0
= 0
RELEASE DATE
mm
±
= 0
P1
SCALE
ANGULAR TOL
A
DOCUMENT STATUS
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS
1 PLACE
±
0 PLACES
±
1.0 °
0.1
0.2
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
6
EC NO: 171650
DRWN: DDEB
CHK'D: MVANSLAMBROU
APPR: MVANSLAMBROU
INITIAL REVISION:
DRWN: APROFFITT
APPR: VKOSHY
THIRD ANGLE PROJECTION
5
2018/01/19
2018/02/16
2018/02/16
PRODUCT CUSTOMER DRAWING
DOC TYPE DOC PART REVISION
DOCUMENT NUMBER
2014/05/14
2014/06/27
DRAWING
SERIES
A1-SIZE
33472
4
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
SD-33472-0001
MATERIAL NUMBER
PSD 001
CUSTOMER
GENERAL MARKET
3
2
C2
SHEET NUMBER
7 OF 11
1
A
18
17
16
15
14
13
12
11
10
9
7
8
5
6
4
3
2
1
SHEET DESCRIPTION
MOLEX BACKSHELL
L
L
K
K
J
J
H
H
G
G
F
F
E
E
D
D
C
C
SYMBOLS
B
= 0
= 0
= 0
FORMAT: master-tb-prod-A1
REVISION: H
DATE: 2017/10/06
18
17
16
2018/02/16
22:02:25
15
14
13
12
11
10
9
8
7
CURRENT REV DESC:
B
GENERAL TOLERANCES
(UNLESS SPECIFIED)
4 PLACES
±
= 0
3 PLACES
±
= 0
2 PLACES
±
0.1
1 PLACE
±
0.2
0 PLACES
±
= 0
C
3:1
= 0
= 0
RELEASE DATE
mm
±
= 0
P1
SCALE
ANGULAR TOL
A
DOCUMENT STATUS
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS
1.0 °
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
6
EC NO: 171650
DRWN: DDEB
CHK'D: MVANSLAMBROU
APPR: MVANSLAMBROU
INITIAL REVISION:
DRWN: APROFFITT
APPR: VKOSHY
THIRD ANGLE PROJECTION
5
2018/01/19
2018/02/16
2018/02/16
PRODUCT CUSTOMER DRAWING
DOC TYPE DOC PART REVISION
DOCUMENT NUMBER
A
2014/05/14
2014/06/27
DRAWING
SERIES
A1-SIZE
33472
4
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
SD-33472-0001
MATERIAL NUMBER
PSD 001
CUSTOMER
GENERAL MARKET
3
2
C2
SHEET NUMBER
8 OF 11
1
18
17
16
15
14
13
12
11
10
9
8
7
5
6
4
3
2
SHEET DESCRIPTION
SCHLEMMER BACKSHELL CONFIGURATIONS
1
CHARTED DIMENSIONS
DIMENSIONS
DESCRIPTION
H
N/A
2X3 W/ CLIPSLOT
28.50
2X3 W/O CLIPSLOT
L
2X4 W/ CLIPSLOT
2X4 W/O CLIPSLOT
2X6 W/ CLIPSLOT
2X6 W/O CLIPSLOT
L
N/A
30.75
N/A
35.83
K
K
J
J
⌀DIM H
MIN PASS-THRU
WITH NO CLEARANCE
H
H
(71.26)
G
G
F
F
E
E
D
D
RECEPTACLE SEALED ASSEMBLY WITH RECEPTACLE BACKSHELL
C
C
=
ANGULAR TOL ± 1.0 °
=
0
4 PLACES
±
=
0
3 PLACES
±
2 PLACES
±
0.1
APPR BY
1 PLACE
±
0.2
VKOSHY
0 PLACES
±
P1
RELEASE DATE
17
2018/02/16
16
22:02:25
15
14
13
12
11
10
9
8
7
0
=
0
=
0
=
0
171650
DDEB
MVANSLAMBROU
MVANSLAMBROU
0
REV
RELEASE STATUS
18
FORMAT: master-tb-prod-A1
REVISION: G
DATE: 2017/02/06
C
DRWN BY
=
=
A
0
EC NO:
DRWN:
CHK'D:
APPR:
B
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS
SCALE
GENERAL
B
TOLERANCES
mm
4:1
(UNLESS SPECIFIED)
2018/01/19
2018/02/16
2018/02/16
QUALITY
SYMBOLS
C2
6
DATE
2014/05/14
APROFFITT
2014/06/16
KBORUSZEWSKI
DRAWING SIZE
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
5
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
DATE
CHK'D BY
DATE
2014/06/27
PRODUCT CUSTOMER DRAWING
MATERIAL NUMBER
SERIES
A
CUSTOMER
THIRD ANGLE PROJECTION
33472
A1
GENERAL MARKET
DOCUMENT NUMBER
DOC TYPE DOC PART SHEET NUMBER
SD-33472-0001
4
3
PSD
2
001
9 OF 11
1
18
17
16
15
14
13
12
11
10
9
7
8
5
6
4
SHEET DESCRIPTION
MOLEX BACKSHELL CONFIGURATIONS
B
2X2 LENGTHENED
2X4 W/ CLIPSLOT
2X4 W/O CLIPSLOT
2X8 W/ CLIPSLOT
2X8 W/O CLIPSLOT
2X10 W/ CLIPSLOT
2X10 W/O CLIPSLOT
�⌀ DIM K�
MIN PASS-THRU
WITH NO CLEARANCE
2
1
CHARTED DIMENSIONS
DIMENSIONS
DESCRIPTION
J
K
L
TBD
TBD
TBD
2X2 W/O CLIPSLOT
TBD
TBD
TBD
2X2 W/ CLIP SLOT
L
�DIM J� MAX
3
B
C
TBD
58.39
N/A
67.19
N/A
67.19
N/A
TBD
32.85
N/A
42.65
N/A
42.65
N/A
TBD
32.10
N/A
36.10
N/A
36.10
N/A
M
TBD
TBD
L
TBD
44.26
N/A
56.49
N/A
56.49
N/A
K
K
J
J
H
H
RECEPTACLE SEALED ASSEMBLY WITH RECEPTACLE BACKSHELL
G
G
�⌀ DIM M�
MIN PASS-THRU
WITH NO CLEARANCE
F
F
E
E
D
D
�DIM L� MAX
ADD THE VALUE OF 'L' TO THE TOTAL DIMENSION
WHENEVER ADAPTOR IS USED
C
C
SYMBOLS
B
= 0
= 0
= 0
FORMAT: master-tb-prod-A1
REVISION: H
DATE: 2017/10/06
18
17
16
2018/02/16
22:02:25
15
14
13
12
11
10
9
8
7
CURRENT REV DESC:
B
GENERAL TOLERANCES
(UNLESS SPECIFIED)
4 PLACES
±
= 0
3 PLACES
±
= 0
2 PLACES
±
0.1
1 PLACE
±
0.2
0 PLACES
±
= 0
C
2.5:1
= 0
= 0
RELEASE DATE
mm
±
= 0
P1
SCALE
ANGULAR TOL
A
DOCUMENT STATUS
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS
1.0 °
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
6
EC NO: 171650
DRWN: DDEB
CHK'D: MVANSLAMBROU
APPR: MVANSLAMBROU
INITIAL REVISION:
DRWN: APROFFITT
APPR: VKOSHY
THIRD ANGLE PROJECTION
5
2018/01/19
2018/02/16
2018/02/16
PRODUCT CUSTOMER DRAWING
DOC TYPE DOC PART REVISION
DOCUMENT NUMBER
A
2014/05/14
2014/06/27
DRAWING
SERIES
A1-SIZE
33472
4
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
SD-33472-0001
MATERIAL NUMBER
PSD 001
CUSTOMER
GENERAL MARKET
3
2
C2
SHEET NUMBER
10 OF 11
1
18
17
16
15
14
13
12
11
10
9
7
8
5
6
4
3
2
1
IF HEADER IS RECESSED INTO A POCKET, THESE DIMENSIONS REPRESENT
NO PARTING LINE AT THIS LOCATION
60°
L
60°
ICD 10
1.79±0.20
5.27
5.27
R2.0
THE MINIMUM CLEARANCE REQUIRED FOR THE MATING CONNECTOR SHROUD
25.40MIN.
ICD 25
L
25.40MIN.
ICD 26
ICD 11
5°
ICD 9
30°
ICD 28
15.3MIN.
ICD 27
20.50MIN.
MIN. ALL AROUND FOR
MATING CONNECTOR
ICD 12
SHROUD CLEARANCE
11.4MIN. ICD 29
K
K
0.70±0.15
ALL AROUND
22.88+0.10
-0.20
22.88+0.10
-0.20
DETAIL A
ICD 2
ICD 1
PACKAGE FRAME
ICD 13
R (6.47)
2.30
ICD 30
SCALE 10:1
KEYING OPTION A
ICD 31
SCALE 4:1
MATING INTERFACE NOTES: VALID UNLESS OTHERWISE SPECIFIED
ICD 32
J
3.00
20X 9.75+0.10
-0.20
25°
12.90 ICD 15
DETAIL A
60°
ICD 14
2.90+0.20
-0.80
5.27
C
ICD 16
H
10.50+0.15
-0.10
ICD 17
17.10+0.10
-0.20
CONNECTOR-HEADER POLARIZATION FEATURES (OPTIONS A THRU D) WILL FUNCTION.
THE FULL SHROUD ALSO PREVENTS SCOOP DAMAGE TO THE HEADER PINS. REFER TO
'SAE/USCAR-12 CONNECTOR DESIGN GUIDE LINES' FOR ADDITIONAL INFORMATION
b. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR
DA
22.88+0.10
-0.20
DATUM B
ICD 4
B
KEYING OPTION B
(0.805)
2. MATERIAL MUST BE SELF EXTINGUISHING
2. MATERIALS:
a. MATERIAL: SPS/NYLON GF20, REGRIND 20% MAX BY WEIGHT
3.50
1.50
ALL AROUND
ICD 21
F
ICD 18
ICD 19
AT TIP
REFER TO EWCAP DWG. NO. EWCAP-001
'D'
18.00
ICD 20
25°
60°
AT BASE
1.50 TERMINAL BLADE CONFIGURATION
5.27
DEVIATION REQUIRES APPROVAL OF AUTHORIZED PERSON
DETAIL C
40.83
17.10+0.10
-0.20
ICD 6
22.88+0.10
-0.20
ICD 5
THICKNESS: 1.25 - 2.25 MICROMETERS
THICKNESS: 2.5 - 4.0 MICROMETERS
2. SILVER: - BARRIER MATERIAL: ELECTRO-DEPOSITED DUCTILE SULPHAMATE NICKEL
THICKNESS: 1.25 - 2.25 MICROMETERS
(0.5% MAX IMPURITIES) OVER NICKEL ANTI-TARNISH TREATMENT
EVERBRIGHT WS
4X R5.73
2X R641.56
25°
NO
ICD 22
C
13.05
17.10+0.10
-0.20
17.10+0.10
-0.20
ICD 7
ICD 8
LUBRICANTS SHOULD BE APPROVED BY THE RESPONSIBLE ENGINEER.
(1.20)
5. INFORMATION FOR BLADE DESIGN WAS DEVELOPED FROM EWCAP DWG: EWCAP-001
ICD 36
3. GEOMETRY:
REFER TO EWCAP DWG. NO. EWCAP-001
a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER
150-T001
FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING,
1.50 TERMINAL BLADE CONFIGURATION
SURFACE MUST BE FREE
ANALYZE THE CAD MODEL.
(2.90)
AT TANGENT
5.50
OPTION
DOCUMENT STATUS
FORMAT: master-tb-prod-A1
REVISION: H
DATE: 2017/10/06
18
RELEASE DATE
17
16
f. NO PARTING LINES, NO DRAFT, MISMATCHES OR EJECTOR MARKS PERMISSIBLE WITHIN
CONSTRUCTION BELOW THIS SURFACE IS
NOT CONTROLLED BY EWCAP. NO PLASTIC
SECTION B-B
FEATURES MAY EXTEND ABOVE THIS SURFACE.
SYMBOLS
= 0
= 0
1.05±0.05
ICD 23
= 0
FOR POSITIONS
13
12
11
10
9
8
7
SCALE
mm
1:1
CURRENT REV DESC:
B
GENERAL TOLERANCES
(UNLESS SPECIFIED)
= 0
4 PLACES
±
= 0
3 PLACES
±
= 0
2 PLACES
±
= 0
C
DIMENSION UNITS
±
= 0
22:02:25
SEALING SURFACE. SEALING SURFACE TOOLING TO BE PROCESSED
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
TO A SURFACE FINISH OF NTMA #70 (400 PAPER) MINIMUM
ANGULAR TOL
= 0
SEE KEYING OPTION VIEWS
14
b. ALLOWABLE FLASH MAX 0.20 HIGH BY MAX 0.13 THICK.
e. NO EXTERNAL MOLD RELEASE AGENT ALLOWED DURING MANUFACTURING
APPLIES 2X
15
ICD 37
C
OF A FEATURE. DRAFT WILL REMOVE MATERIAL.
d. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B)
SCALE 20:1
2018/02/16
OF A FEATURE. DRAFT WILL ADD MATERIAL.
c. ALLOWABLE SPLIT/PARTING LINE MISMATCH 0.2 MAX.
COLOR
P1
PLUS DRAFT - INDICATES A DIMENSION REPRESENTS THE SMALLEST SIZE
MINUS DRAFT - INDICATES A DIMENSION REPRESENTS THE LARGEST SIZE
DETAIL C
P/N
c. GENERAL TOLERANCES: SEE TITLE BLOCK
a. DRAFT TO BE WITHIN TOLERANCE.
ICD 24
STONE GRAY
DK GRAY
LT GRAY
BLACK
MATING CONNECTOR
D
4. MANUFACTURING:
SCALE 4:1
D
C
B
A
b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994
d. EDGES AND UNDIMENSIONED DETAILS PER ISO13715
0.25°
MAX DRAFT
KEYING OPTION D
150-S-020-2-D02
150-S-020-2-C02
150-S-020-2-B02
150-S-020-2-A02
E
AMBIENT TERMPERATURE PER SAE USCAR-2 FOR 1008 HOURS, PROCESS
18X 3.50
SECTION C-C
13.05
REFLECTIVITY - SECTION 6.0
OR DEGRADE IT'S ELECTRICAL PERFORMANCE UP TO A MAXIMUM CLASS
A
T
4X R4.42
3. BLADES MUST CONFORM TO ES-40000-5007, EXCEPT FOR SPECULAR
4. ANY PROCESS LUBRICANT REMAINING ON THE TERMINAL MUST NOT VARNISH
15.75
SEALING ALL AROUND
SCALE 4:1
25°
THICKNESS: 1.9 - 3.3 MICROMETERS
TERMINAL POSITION 20
PARTING LINES FOR
KEYING OPTION C
F
- TOP LAYER: ELECTRO-DEPOSITED SEMI-BRIGHT PURE SILVER
2X R31.73
OF SURFACE DEFECTS AND
2X R30.42
- BARRIER MATERIAL: NICKEL DEPOSIT FROM NICKEL SULFAMATE
PLATING SOLUTION W/O ANY ADDITIVES
6.00
15.33
G
- TOP LAYER: 100% ELECTRO-DEPOSITED TIN, MATTE FINISH
2X R642.87
E
TENSILE STRENGTH >= 410 N/mm瞈P
B
TERMINAL POSITION 11
13.05
c. FOR BLADE BASE MATERIAL, PLATING AND PROCESS LUBRICANT:
1. TIN: - BASE MATERIAL:COPPER ALLOY, CONDUCTIVITY >=60% IACS AT 20°C;
17.95
150-T001
SECTION A-A
b. STANDARD COLORS FOR POLARIZATION (SEE KEYING OPTIONS TABLE).
TERMINAL POSITION 10
3.00
H
1. BURN RATE 100mm/MIN MAXIMUM
A
VA
LI
SCALE 4:1
A
PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016
c. FLAMMABILITY REQUIREMENT: PER ISO3795 OR GM3191
ICD 35
TERMINAL POSITION 1
G
B
ICD 34
43.45
ICD 3
D
A FULL SHROUD ON THE MATING CONNECTOR IS REQUIRED TO INSURE THAT THE
2X 17.00MIN.
AT TANGENT
13.05
a. DESIGNED TO MATE WITH MOLEX CONNECTOR 33472-2XXX & 160008-0XXX & 160074-0XXX
C
3.50
J
1. GENERAL:
TE
D
ICD 33
1 PLACE
±
0 PLACES
±
1.0 °
0.1
0.2
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
6
EC NO: 171650
DRWN: DDEB
CHK'D: MVANSLAMBROU
APPR: MVANSLAMBROU
INITIAL REVISION:
DRWN: APROFFITT
APPR: VKOSHY
THIRD ANGLE PROJECTION
5
2018/01/19
2018/02/16
2018/02/16
PRODUCT CUSTOMER DRAWING
DOC TYPE DOC PART REVISION
DOCUMENT NUMBER
2014/05/14
2014/06/27
DRAWING
SERIES
A1-SIZE
33472
4
MX150 RCPT
DUAL ROW SEALED ASSEMBLY MAT SEAL
SD-33472-0001
MATERIAL NUMBER
PSD 001
CUSTOMER
GENERAL MARKET
3
2
C2
SHEET NUMBER
11 OF 11
1
A
