0334824103

PRODUCT SPECIFICATION MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 1 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION Table of Contents 1.0 Scope .................................................................................................................................................... 3 2.0 Product Description................................................................................................................................ 3 2.1. Direct Connect (wire to board application).......................................................................................... 3 2.2. Inline Applications (wire to wire application) ....................................................................................... 3 2.3. Receptacle Assembly......................................................................................................................... 4 2.4. Blade Assembly ................................................................................................................................. 4 2.5. Product Name and Series Number..................................................................................................... 5 3.0 Integral Components and Accessories ................................................................................................... 6 3.1. Integral Components .......................................................................................................................... 6 3.1.1. Receptacle Terminals ................................................................................................................. 6 3.1.2. Blade Terminals ......................................................................................................................... 7 3.1.3. Applicable Wires ........................................................................................................................ 7 3.1.3.1. Wire size ................................................................................................................................ 7 3.1.3.2. ISO Wire................................................................................................................................. 7 3.1.3.3. SAE Wire................................................................................................................................ 8 3.1.4. Terminal Service Tool ................................................................................................................ 8 3.2. Accessories ....................................................................................................................................... 8 3.2.1. Wire Harness Retention Clip - Recommended ........................................................................... 8 3.2.2. Backshell - Recommended......................................................................................................... 8 3.2.3. Cavity (Seal) Plugs ..................................................................................................................... 8 4.0 Applicable Documents and Specifications.............................................................................................. 8 5.0 Ratings .................................................................................................................................................. 9 5.1. Voltage - Operating ............................................................................................................................ 9 5.2. Voltage - Isolation Resistance ............................................................................................................ 9 5.3. Current Rating.................................................................................................................................... 9 5.4. Temperature ...................................................................................................................................... 9 5.5. Sealing ............................................................................................................................................... 9 5.6. Flammability ..................................................................................................................................... 10 5.7. Dielectric Withstand Strength ........................................................................................................... 10 6.0 Performance ........................................................................................................................................ 10 6.1. Electrical Requirements ................................................................................................................... 10 6.2. Mechanical Requirements ................................................................................................................ 11 6.2.1. Mechanical Requirements Deviations....................................................................................... 12 6.3. Environmental Requirements ........................................................................................................... 13 7.0 Packaging ............................................................................................................................................ 14 8.0 Gages and Fixtures.............................................................................................................................. 14 9.0 Other Information ................................................................................................................................. 14 REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 2 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 1.0 SCOPE This product specification covers the 3.50 mm (0.138 inch) centerline (pitch) mat seal dual row MX150 sealed product line connection system. The MX150 connection system uses crimp technology. 2.0 PRODUCT DESCRIPTION 2.1. DIRECT CONNECT (WIRE TO BOARD APPLICATION) 2.2. INLINE APPLICATIONS (WIRE TO WIRE APPLICATION) REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 3 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 2.3. RECEPTACLE ASSEMBLY 2.4. BLADE ASSEMBLY REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 4 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 2.5. PRODUCT NAME AND SERIES NUMBER Refer to listed document number for part availability, dimensions, material, marking information, packaging information, interface definition, and configuration options etc. Product Name Document Number Series MX150 Receptacle 2X2 Sealed Assembly 33472 MX150 Receptacle 2X3 Sealed Assembly 33472 ◊ MX150 Receptacle 2X3 Sealed Assembly with Clipslot 33472 ◊ MX150 Receptacle 2X4 Sealed Assembly 33472 MX150 Receptacle 2X4 Sealed Assembly with Clipslot SD-33472-0001 - Assembly Drawing SD-33472-0002 - Bill of Materials 33472 MX150 Receptacle 2X6 Sealed Assembly 33472 MX150 Receptacle 2X6 Sealed Assembly with Clipslot 33472 MX150 Receptacle 2X8 Sealed Assembly 33472 MX150 Receptacle 2X10 Sealed Assembly 33472 MX150 Blade 2X2 Sealed Assembly 33482 MX150 Blade 2X3 Sealed Assembly 33482 MX150 Blade 2X4 Sealed Assembly 33482 SD-33482-0001 - Assembly Drawing SD-33482-0002 - Bill of Materials MX150 Blade 2X6 Sealed Assembly 33482 MX150 Blade 2X8 Sealed Assembly 33482 MX150 Blade 2X10 Sealed Assembly 33482 ◊ See document numbers listed above for connector assembly part numbers without a mat seal. These part numbers are omitted from PS-33472-000. REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 5 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 3.0 INTEGRAL COMPONENTS AND ACCESSORIES Integral components and accessories are sold separately. 3.1. INTEGRAL COMPONENTS 3.1.1. Receptacle Terminals For crimping information see the Receptacle Terminal Application Specification listed in section 4.0. Document Number Terminal Information MX150 Receptacle, Mat Seal, High Performance, Sn, M3 Grip Code MX150 Receptacle, Mat Seal, High Performance, Au, M3 Grip Code MX150 Receptacle, Mat Seal, High Performance, Ag, M3 Grip Code MX150 Receptacle, Mat Seal, High Performance, Sn, 22 Grip Code MX150 Receptacle, Mat Seal, High Performance, Au, 22 Grip Code MX150 Receptacle, Mat Seal, High Performance, Ag, 22 Grip Code SD-33012-002 MX150 Receptacle, Mat Seal, High Performance, Sn, 18 Grip Code MX150 Receptacle, Mat Seal, High Performance, Au, 18 Grip Code MX150 Receptacle, Mat Seal, High Performance, Ag, 18 Grip Code MX150 Receptacle, Mat Seal, High Performance, Sn, 14 Grip Code MX150 Receptacle, Mat Seal, High Performance, Au, 14 Grip Code MX150 Receptacle, Mat Seal, High Performance, Ag, 14 Grip Code REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 6 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 3.1.2. Blade Terminals For crimping information see the Blade Terminal Application Specification listed in section 4.0. Document Number Terminal Information MX150 Blade Mat Seal, High Performance, Sn, M3 Grip Code MX150 Blade Mat Seal, High Performance, Au, M3 Grip Code MX150 Blade Mat Seal, High Performance, Ag, M3 Grip Code MX150 Blade Mat Seal, High Performance, Sn, 22 Grip Code MX150 Blade Mat Seal, High Performance, Au, 22 Grip Code MX150 Blade Mat Seal, High Performance, Ag, 22 Grip Code SD-33000-001 MX150 Blade Mat Seal, High Performance, Sn, 18 Grip Code MX150 Blade Mat Seal, High Performance, Au, 18 Grip Code MX150 Blade Mat Seal, High Performance, Ag, 18 Grip Code MX150 Blade Mat Seal, High Performance, Sn, 14 Grip Code MX150 Blade Mat Seal, High Performance, Au, 14 Grip Code MX150 Blade Mat Seal, High Performance, Ag, 14 Grip Code 3.1.3. Applicable Wires 3.1.3.1. Wire size See section 5.5 for wire range recommended per circuit size. 3.1.3.2. ISO Wire Per the listed wire specifications where the insulation diameter is within 1.20mm to 2.40mm. - GMW15626 February 2008 - ES-AU5T-1A348-AA Rev D REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 7 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 3.1.3.3. SAE Wire Per the listed wire specifications where the insulation diameter is within 1.50mm to 2.69mm. - ESB-ML123-A 2003 - SAE J1128 Dec 2005 3.1.4. Terminal Service Tool See the Connector Application Specification listed in section 4.0. 3.2. ACCESSORIES 3.2.1. Wire Harness Retention Clip - Recommended For further information contact your sales engineer. 3.2.2. Backshell - Recommended For availability and part numbers see the Assembly Drawing and the Bill of Materials Drawing listed in section 2.5. 3.2.3. Cavity (Seal) Plugs *Seal plugs are not to be used to replace shorting bar terminals. 4.0 Information Description MX150 Cavity Plug, Natural 34345-0001 Document Number SD-34345-001 APPLICABLE DOCUMENTS AND SPECIFICATIONS Document Title REVISION: F10 Document Number UL File Number Not Applicable CSA File Number Not Applicable TUV License number Not Applicable IMDS Report Available upon request Environmental Compliance Available on molex.com Connector Application Specification AS-33472-100 Terminal Product Specification PS-33012-002 Receptacle Terminal Application Specification AS-33012-002 Blade Terminal Application Specification AS-33000-001 Connector Test Summary TS-33472-0001 PLR Transit Related Product Specification PS-34646-001 MX150 CPA Installation Guide AS-33611-001 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 8 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 5.0 RATINGS 5.1. VOLTAGE - OPERATING Operating Voltage: 14 Volts DC Maximum 5.2. VOLTAGE - ISOLATION RESISTANCE 100MΩ Minimum when 500 Volts DC between adjacent terminals and terminals to ground. 5.3. CURRENT RATING See the Terminal Product Specification listed in section 4.0. 5.4. TEMPERATURE Non-operating: - 40 Cº to + 125 Cº Operating: - 40 Cº to + 125 Cº 5.5. SEALING - Meets IP67 - Meets IPx9K when the following configuration is used. - With CPA - With Backshell - With Convoluted Conduit Circuit Size 2x2 2X3 2X4 2X6 2X8 Part Numbers ALL except 33472-04XX 33472-44XX 33482-04XX 33482-44XX ALL ◊ Wire Range 1.20-2.69 mm (0.047–0.106 in) 33482-21xx – 33482-2999 2X10 33472-2xxx 33472-04XX 33472-44XX 2X2 1.40-2.69 mm 33482-04XX (0.055–0.106 in) 33482-44XX 2X10 33482-20xx ◊ See document numbers listed in section 2.5 for connector assembly part numbers without a mat seal. These part numbers are omitted from PS-33472-000. REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 9 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION - Product Performance Is Based On Connector Requirements Per GMW3191 Dec 2007 - Sealing Performance Circuit Size Operating Conditions Additional Required Component 1x2 Sealing Class III Temperature Class III Convolute CPA ◊ Backshells are one time use only. This condition may cause reduced backshell retention posttest. 5.6. FLAMMABILITY The burn rate of the plastic material when tested to ISO 3795 shall not exceed 100 mm/min. 5.7. DIELECTRIC WITHSTAND STRENGTH Connectors withstand 1500V AC between adjacent terminals for 1 minute. Test performed with the following conditions. - MX150 2X4 Connector - JIS C5402 5.1/MIL-STD-202 Method 301 - UL1007 AWG18 6.0 PERFORMANCE - Additional circuit sizes added to the product family are validated per USCAR-2 Rev. 4 Appendix D. 6.1. ELECTRICAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT 1 Contact Resistance (Low Level) Mate connectors: limiting the open circuit voltage of 20 mV and a maximum current of 100 mA. 10 milliohms MAXIMUM 2 Contact Resistance @ Rated Current (Voltage Drop) Mate connectors: apply a 5 ampere/ 1.0 mm current 3 Isolation Resistance Apply a voltage of 500 VDC between adjacent terminals and between terminals to ground. 4 REVISION: F10 2 Mate terminals: measure the temperature Temperature rise at the rated current after: Rise 1008 hours of bench top testing (via Current Cycling) (45 minutes ON and 15 minutes OFF per hour). ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: 10 milliohms MAXIMUM 20 Meg ohms MINIMUM Temperature rise over Ambient: +55 Cº MAXIMUM MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 10 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 6.2. MECHANICAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT Connector Mate/ Unmate Forces Mate and unmate connector (male to female) at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 75 Newtons MAXIMUM 5 6 Terminal Retention Force (in Housing) Axial pullout force on the terminal in the housing at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 7 Terminal Insertion Force (into Housing) Apply an axial insertion force on the terminal at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 30 Newtons MAXIMUM 8 Connector Audible Feedback The connector lock must provide audible feedback during connector mating at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 7dB over Ambient (C scale) 9 Polarization Feature Effectiveness Connector must be polarized to prevent mating with similar connectors or incorrect orientation 220 Newtons MINIMUM 10 Terminal Position Assurance (TPA) Insertion Force (into housing) The force to insert the TPA from the preload (as shipped) position to the final position at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 60 Newtons MAXIMUM 11 Terminal Position Assurance (TPA) Extraction Force (in housing) The force to extract the TPA from the final position to the preload position (as shipped) at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 60 Newtons MAXIMUM 12 Connector Position Assurance (CPA) Insertion Force (into housing) The force to insert the CPA from the preload (as shipped) position to the final position at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 13 Connector Position Assurance (CPA) Extraction Force (in housing) The force to extract the CPA from the final position to the preload position at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 60 Newtons MAXIMUM 14 Locator Clip Insertion Force (in housing) The force to insert the locator clip to the final (as shipped) position at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 30 Newtons MAXIMUM 15 Locator Clip Extraction Force (in housing) The force to extract the locator clip from the final (as shipped) position to out at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 110 Newtons MINIMUM REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: Unmate 110 Newtons MINIMUM 90 Newtons MINIMUM 40 Newtons MINIMUM (unmated) 15 Newtons MAXIMUM (fully mated) MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 11 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 6.2.1. Mechanical Requirements Deviations ITEM DESCRIPTION 7 10 TEST CONDITION CKT Terminal Insertion Force for Apply an axial insertion force on the Wire Diameter above terminal at a rate of 50 ± 6 mm (2 ± ¼ 2.5mm not inch) per minute. exceeding 2.69mm (into Housing) ALL Terminal Position Assurance (TPA) Insertion Force (into housing) 2X2 The force to insert the TPA from the preload (as shipped) position to the final position at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. BLADE/ RCPT REQUIREMENT BLADE 45 Newtons MAXIMUM RCPT 40 Newtons MAXIMUM RCPT 90 Newtons MAXIMUM 90 Newtons MAXIMUM 2X2 Terminal Position Assurance (TPA) Extraction Force (in housing) 11 The force to extract the TPA from the final position to the preload position (as shipped) at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. 2X3 RCPT 2x4 BLADE 75 Newtons MAXIMUM RCPT 130 Newtons MAXIMUM 2X10 Connector Position Assurance (CPA) Extraction Force (in housing) 13 REVISION: F10 The force to extract the CPA from the final position to the preload position at a rate of 50 ± 6 mm (2 ± ¼ inch) per minute. ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: ALL 130 Newtons MAXIMUM RCPT 40 Newtons MAXIMUM 3 Newtons MINIMUM MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 12 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 6.3. ENVIRONMENTAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT 16 Field Correlated Life Test (FCLT) Mate connectors up to 1 cycle and expose to environment per SAE/USCAR-20. 20 milliohms MAXIMUM 17 Durability 18 19 20 Mate connectors up to 10 cycles prior to environmental tests. 10 milliohms MAXIMUM & Discontinuity < 1 microsecond Mate connectors per durability; expose to 100 cycles of: Temperature C° Duration (Minutes) -40 +0/-3 30 +125 +3/-0 30 10 milliohms MAXIMUM & Discontinuity < 1 microsecond Thermal Shock (Electrical) High Temperature Exposure (Sealing) Temperature/ Humidity (Sealing) 21 Fluid Resistance (Sealing) 22 Vibration/ Mechanical Shock (Electrical) 28 kPa for 15 seconds MINIMUM pressure/vacuum Mate connectors per durability and expose to & 1008 hours at 125 ± 2°C Submersion for 30 minutes & Isolation Resistance of 20 Meg ohms @ 500 VDC MINIMUM Mate connectors per durability and expose connector system to forty 8-hour cycles of combined heating and humidity exposure –40 ºC and 125 ºC at 0% to 90% RH 28 kPa for 15 seconds MINIMUM pressure/vacuum & Submersion for 30 minutes & Isolation Resistance of 20 Meg ohms @ 500 VDC MINIMUM Submerge connector assemblies in the Submersion for 30 minutes following fluids: gasoline, *diesel fuel, engine & oil, ethanol, power steering fluid, automatic Isolation Resistance of 20 Meg transmission fluid, engine coolant, and brake ohms @ 500 VDC MINIMUM fluid. Mate connectors per durability. Connector assembly shall be vibrated for (8 hours / axes @ 12.1 Grms, 10 shocks @ 35 Gs / axes) Coupled to engine. 10 milliohms MAXIMUM & Discontinuity < 1 microsecond * Silicone seals swell in the presence of gasoline and diesel fuel. This condition may cause excessive connector mate/unmate forces and/or reduce the Grommet Cap retention. REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 13 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 7.0 PACKAGING - Molex packaging drawing numbers are located on the Assembly Drawing listed in section 2.5. - Parts should be packaged to protect against damage during handling, transit and storage. 8.0 GAGES AND FIXTURES All applicable gages and fixtures are referenced in the appropriate control plans. 9.0 OTHER INFORMATION - Products confirm to USCAR-2 class III environment. - ◊ See document numbers listed in section 2.5 for connector assembly part numbers without a mat seal. These part numbers are omitted from PS-33472-000. - To add new knock out patterns contact your sales engineer. MOLEX REPRESENTS AND WARRANTS TO BUYER FOR A PERIOD OF ONE (1) YEAR FROM THE DATE OF DELIVERY OF THE PRODUCTS TO BUYER THAT 1) THE PRODUCTS SHALL CONFORM TO THE MOLEX SPECIFICATIONS FOR THE PRODUCTS IN FORCE AT THE DATE OF DELIVERY OF THE PRODUCTS TO BUYER, AND 2) THE PRODUCTS SHALL BE OF FREE FROM MATERIAL DEFECTS IN MATERIALS AND MANUFACTURING. EXCEPT AS EXPRESSLY PROVIDED ABOVE, MOLEX MAKES NO WARRANTY, EXPRESS OR IMPLIED, REGARDING THE PRODUCTS. ALL IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. IN ADDITION, MOLEX EXPRESSLY DISCLAIMS ANY WARRANTY OBLIGATIONS IN THOSE INSTANCES WHERE THE FAILURES RESULTED FROM THE MODIFICATION OF THE PRODUCTS BY BUYER OR ITS CUSTOMERS, IMPROPER HANDLING, USE OR INSTALLATION OF THE PRODUCTS BY BUYER OR ITS CUSTOMERS, OR ANY OTHER CAUSE BEYOND THE CONTROL OF MOLEX. REVISION: F10 ECR/ECN INFORMATION: EC No: UAU2016-1442 DATE: 3/28/2016 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 14 of 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Andy Proffitt Katy Boruszewski Vijy Koshy TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC