0334826261

PRODUCT SPECIFICATION MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL REVISION: F16 ECR/ECN INFORMATION: EC No: 605377 DATE: 10/03/2018 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 1 of 15 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. BARTHLOW D. BARTHLOW M. VANSLAMBROUCK TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION Table of Contents 1.0 Scope .................................................................................................................................................... 3 2.0 Product Description................................................................................................................................ 3 2.1. Direct Connect (wire to board application).......................................................................................... 3 2.2. Inline Applications (wire to wire application) ....................................................................................... 3 2.3. Receptacle Assembly......................................................................................................................... 4 2.4. Blade Assembly ................................................................................................................................. 4 2.5. Product Name and Series Number..................................................................................................... 5 3.0 Integral Components and Accessories ................................................................................................... 6 3.1. Integral Components .......................................................................................................................... 6 3.1.1. Receptacle Terminals ................................................................................................................. 6 3.1.2. Blade Terminals ......................................................................................................................... 7 3.1.3. Applicable Wires ........................................................................................................................ 7 3.1.3.1. Wire size ................................................................................................................................ 7 3.1.3.2. ISO Wire................................................................................................................................. 7 3.1.3.3. SAE Wire................................................................................................................................ 8 3.1.4. Terminal Service Tool ................................................................................................................ 8 3.2. Accessories ....................................................................................................................................... 8 3.2.1. Wire Harness Retention Clip - Recommended ........................................................................... 8 3.2.2. Backshell - Recommended......................................................................................................... 8 3.2.3. Cavity (Seal) Plugs ..................................................................................................................... 8 4.0 Applicable Documents and Specifications.............................................................................................. 8 5.0 Ratings .................................................................................................................................................. 9 5.1. Operating Voltage .............................................................................................................................. 9 5.1.1. LOW VOLTAGE TYPE 1 APPLICATION: Voltage ≤ 14 V........................................................... 9 5.1.2. LOW VOLTAGE TYPE 2 APPLICATION: 14 V ≤ Voltage ≤ 60 V ............................................... 9 5.1.3. Smallest Clearance and Creepage Values of MX150 Terminal Cavity........................................ 9 5.1.4. Material Group (CTI) Information ................................................................................................ 9 5.1.5. Operating Voltage (According to IEC60664-1)............................................................................ 9 5.2. Isolation Resistance ........................................................................................................................... 9 5.3. Temperature .................................................................................................................................... 10 5.4. Sealing ............................................................................................................................................. 10 5.5. Flammability ..................................................................................................................................... 11 5.6. Dielectric Withstand Strength ........................................................................................................... 11 6.0 Performance ........................................................................................................................................ 11 6.1. Electrical Requirements ................................................................................................................... 11 6.2. Mechanical Requirements ................................................................................................................ 12 6.2.1. Mechanical Requirements Deviations....................................................................................... 13 6.3. Environmental Requirements ........................................................................................................... 14 7.0 Packaging ............................................................................................................................................ 15 8.0 Gages and Fixtures.............................................................................................................................. 15 9.0 Other Information ................................................................................................................................. 15 REVISION: F16 ECR/ECN INFORMATION: EC No: 605377 DATE: 10/03/2018 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 2 of 15 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. BARTHLOW D. BARTHLOW M. VANSLAMBROUCK TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 1.0 SCOPE This product specification covers the 3.50 mm (0.138 inch) centerline (pitch) mat seal dual row MX150 sealed product line connection system. The MX150 connection system uses crimp technology. 2.0 PRODUCT DESCRIPTION 2.1. DIRECT CONNECT (WIRE TO BOARD APPLICATION) 2.2. INLINE APPLICATIONS (WIRE TO WIRE APPLICATION) REVISION: F16 ECR/ECN INFORMATION: EC No: 605377 DATE: 10/03/2018 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 3 of 15 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. BARTHLOW D. BARTHLOW M. VANSLAMBROUCK TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 2.3. RECEPTACLE ASSEMBLY 2.4. BLADE ASSEMBLY REVISION: F16 ECR/ECN INFORMATION: EC No: 605377 DATE: 10/03/2018 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 4 of 15 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. BARTHLOW D. BARTHLOW M. VANSLAMBROUCK TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 2.5. PRODUCT NAME AND SERIES NUMBER Refer to listed document number for part availability, dimensions, material, marking information, packaging information, interface definition, and configuration options etc. Product Name Document Number Series MX150 Receptacle 2X2 Sealed Assembly 33472 MX150 Receptacle 2X3 Sealed Assembly 33472 ◊ MX150 Receptacle 2X3 Sealed Assembly with Clipslot 33472 ◊ MX150 Receptacle 2X4 Sealed Assembly 33472 MX150 Receptacle 2X4 Sealed Assembly with Clipslot SD-33472-0001 - Assembly Drawing SD-33472-0002 - Bill of Materials 33472 MX150 Receptacle 2X6 Sealed Assembly 33472 MX150 Receptacle 2X6 Sealed Assembly with Clipslot 33472 MX150 Receptacle 2X8 Sealed Assembly 33472 MX150 Receptacle 2X10 Sealed Assembly 33472 MX150 Blade 2X2 Sealed Assembly 33482 MX150 Blade 2X3 Sealed Assembly 33482 MX150 Blade 2X4 Sealed Assembly 33482 SD-33482-0001 - Assembly Drawing SD-33482-0002 - Bill of Materials MX150 Blade 2X6 Sealed Assembly 33482 MX150 Blade 2X8 Sealed Assembly 33482 MX150 Blade 2X10 Sealed Assembly 33482 ◊ See document numbers listed above for connector assembly part numbers without a mat seal. These part numbers are omitted from PS-33472-000. REVISION: F16 ECR/ECN INFORMATION: EC No: 605377 DATE: 10/03/2018 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 5 of 15 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. BARTHLOW D. BARTHLOW M. VANSLAMBROUCK TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 3.0 INTEGRAL COMPONENTS AND ACCESSORIES Integral components and accessories are sold separately. 3.1. INTEGRAL COMPONENTS 3.1.1. Receptacle Terminals For crimping information see the Receptacle Terminal Application Specification listed in section 4.0. Document Number Terminal Information MX150 Receptacle, Mat Seal, High Performance, Sn, M3 Grip Code MX150 Receptacle, Mat Seal, High Performance, Au, M3 Grip Code MX150 Receptacle, Mat Seal, High Performance, Ag, M3 Grip Code MX150 Receptacle, Mat Seal, High Performance, Sn, 22 Grip Code MX150 Receptacle, Mat Seal, High Performance, Au, 22 Grip Code MX150 Receptacle, Mat Seal, High Performance, Ag, 22 Grip Code SD-33012-002 MX150 Receptacle, Mat Seal, High Performance, Sn, 18 Grip Code MX150 Receptacle, Mat Seal, High Performance, Au, 18 Grip Code MX150 Receptacle, Mat Seal, High Performance, Ag, 18 Grip Code MX150 Receptacle, Mat Seal, High Performance, Sn, 14 Grip Code MX150 Receptacle, Mat Seal, High Performance, Au, 14 Grip Code MX150 Receptacle, Mat Seal, High Performance, Ag, 14 Grip Code REVISION: F16 ECR/ECN INFORMATION: EC No: 605377 DATE: 10/03/2018 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 6 of 15 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. BARTHLOW D. BARTHLOW M. VANSLAMBROUCK TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 3.1.2. Blade Terminals For crimping information see the Blade Terminal Application Specification listed in section 4.0. Document Number Terminal Information MX150 Blade Mat Seal, High Performance, Sn, M3 Grip Code MX150 Blade Mat Seal, High Performance, Au, M3 Grip Code MX150 Blade Mat Seal, High Performance, Ag, M3 Grip Code MX150 Blade Mat Seal, High Performance, Sn, 22 Grip Code MX150 Blade Mat Seal, High Performance, Au, 22 Grip Code MX150 Blade Mat Seal, High Performance, Ag, 22 Grip Code SD-33000-001 MX150 Blade Mat Seal, High Performance, Sn, 18 Grip Code MX150 Blade Mat Seal, High Performance, Au, 18 Grip Code MX150 Blade Mat Seal, High Performance, Ag, 18 Grip Code MX150 Blade Mat Seal, High Performance, Sn, 14 Grip Code MX150 Blade Mat Seal, High Performance, Au, 14 Grip Code MX150 Blade Mat Seal, High Performance, Ag, 14 Grip Code 3.1.3. Applicable Wires 3.1.3.1. Wire size See section 5.4 for wire range recommended per circuit size. For list of validated wires reference terminal application specifications listed in section 4.0. 3.1.3.2. ISO Wire Per the listed wire specifications where the insulation diameter is within 1.20mm to 2.40mm. - GMW15626 February 2008 - ES-AU5T-1A348-AA Rev D REVISION: F16 ECR/ECN INFORMATION: EC No: 605377 DATE: 10/03/2018 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 7 of 15 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. BARTHLOW D. BARTHLOW M. VANSLAMBROUCK TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 3.1.3.3. SAE Wire Per the listed wire specifications where the insulation diameter is within 1.50mm to 2.69mm. - ESB-ML123-A 2003 - SAE J1128 Dec 2005 3.1.4. Terminal Service Tool See the Connector Application Specification listed in section 4.0. 3.2. ACCESSORIES 3.2.1. Wire Harness Retention Clip - Recommended For further information contact your sales engineer. 3.2.2. Backshell - Recommended For availability and part numbers see the Assembly Drawing and the Bill of Materials Drawing listed in section 2.5. 3.2.3. Cavity (Seal) Plugs *Seal plugs are not to be used to replace shorting bar terminals. 4.0 Information Description MX150 Blade cavity Plug, Natural MX150 Rcpt cavity Plug, Dark Grey 34345-0001 34345-4001 Document Number SD-34345-001 SD-34345-001 APPLICABLE DOCUMENTS AND SPECIFICATIONS Document Title REVISION: F16 Document Number UL File Number Not Applicable CSA File Number Not Applicable TUV License number Not Applicable IMDS Report Available upon request Environmental Compliance Available on molex.com Connector Application Specification AS-33472-100 Terminal Product Specification PS-33012-002 Receptacle Terminal Application Specification AS-33012-002 Blade Terminal Application Specification AS-33000-001 Connector Test Summary TS-33472-0001 MX150 CPA Installation Guide AS-33611-001 ECR/ECN INFORMATION: EC No: 605377 DATE: 10/03/2018 DOCUMENT NUMBER: PS-33472-000 TITLE: MX150 DUAL ROW SEALED ASSEMBLY MAT SEAL SHEET No. 8 of 15 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. BARTHLOW D. BARTHLOW M. VANSLAMBROUCK TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 5.0 RATINGS 5.1. OPERATING VOLTAGE 5.1.1. LOW VOLTAGE TYPE 1 APPLICATION: Voltage ≤ 14 V Connector - Typical operating voltage not to exceed 14 Volts peak. Terminal - Maximum single line current dependent on terminal and wire. See terminal product specification PS-33012-002. Low voltage type 1 information applicable to all connector applications. 5.1.2. LOW VOLTAGE TYPE 2 APPLICATION: 14 V ≤ Voltage ≤ 60 V Terminal - Maximum single line current dependent on terminal and wire. See terminal product specification PS-33012-002 Information This interconnect system is not designed for hot mating. Extra signal circuits or HVIL is needed for hot mating/unmating application. The information provided in this section is based on the connector only. For high voltage application, please consult with related safety agency or engineer with customer’s particular safety spec. 5.1.3. Smallest Clearance and Creepage Values of MX150 Terminal Cavity Connector (S/N: 33472/33482): Clearance (in X direction) = 0.90 mm Clearance (in Y direction) = 4.00 mm Creepage (in X direction) = 1.00 mm Creepage (in Y direction) = 5.10 mm 5.1.4. Material Group (CTI) Information Material Group II (400