0340801002

19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 HOLE PRECIOUS METAL PLATING L L 11 26.80±0.25 NO HOLE TIN PLATING A A 2X 1.5 9 33 1.50 K 0.90±0.20 35 PRECIOUS METAL PLATED BLADE TIN PLATED BLADE K SCALE 3:1 (3.75) 1.0 37 J J NOTES: (UNLESS OTHERWISE SPECIFIED) 1. MATING TERMINAL SHOWN ON SD-34083-002 B 2. MATERIAL: ASTM B422, UNS C19025, HR04 THICKNESS: 0.30 mm ±0.01 TEMPER: FULL HARD (REF) TENSILE: 496 MIN MPA H 24 B 3. TIN PLATED TERMINAL FINISH OVERALL UNDERPLATE ELECTRODEPOSITED NICKEL OVERALL ELECTRODEPOSITED REFLOW TIN 4. GOLD PLATED TERMINAL FINISH OVERALL UNDERPLATE ELECTRODEPOSITED DUCTILE SULFAMATE NICKEL CONTACT AREA - ELECTRODEPOSITED GOLD GRIP AREA - ELECTRODEPOSITED 100% TIN MATTE FINISH 0.80±0.05 53 CARRIER BUMP DIRECTION POINTS DOWN FOR TIN PLATED TERMINALS POINTS UP FOR PRECIOUS PLATED TERMINALS 58 57 2.55±0.10 0 2.50-0.10 H 52 3.30 ±0.15 6 28 ⌀D 5. SILVER PLATED TERMINAL FINISH OVERALL UNDERPLATE ELECTRODEPOSITED DUCTILE SULFAMATE NICKEL CONTACT AREA - ELECTRODEPOSITED PURE SILVER (0.5% MAX IMPURITIES) SEMI-BRIGHT FINISH. - SILVER ANTITARNISH : EVABRITE GRIP AREA - ELECTRODEPOSITED 100% TIN MATTE FINISH G STAMP PLATING TYPE (A-PRECIOUS METAL) C 2 A ⌀C SECTION B-B SECTION C-C 12.20±0.15 Scale 7:1 Scale 7:1 15 G C B 6. MEETS PERFORMANCE SPECIFICATION FOR CABLE TO TERMINAL ELECTRICAL CRIMPS PER SAE/USCAR-21 (2/2004) 7. MEETS PERFORMANCE STANDARD FOR AUTOMOTIVE ELECTRICAL CONNECTOR SYSTEMS FOR SAE/USCAR-2, REV. 4 (TEMP CLASS 3) (5/2004) F F 8. MEETS ELECTRICAL CONNECTION SYSTEM DESIGN SPECIFICATION (SDS) REV.15 (9/2007) 3.25 12 (11.43) PROGRESSION 9. MEETS FIELD CORRELATED LIFE TEST (FCLT) PER SAE/USCAR-20 (6/2004) 10. REFERENCE FORD CAVITY SPECIFICATON 97BG-14421-ADA 11. REFERENCE AS-34080-001 FOR CRIMP INFORMATION 55 16 4.25+0.30 0 N 12. REFERENCE PK-31300-516 FOR REEL DIRECTION E E SECTION A-A 13. REFERENCE PS-34083-002 FOR PRODUCT SPECIFICATION TABLE 1 - TERMINAL PART NUMBER AND DIMENSION REFERENCE FAMILY GENDER SEALING PLATING PART NUMBER D Sn C MX150 BLADE Au WIRE SEAL B Ag 34080-0003 34080-1003 34080-0002 34080-1002 34080-0001 34080-1001 34080-0106 34080-1106 34080-0104 34080-1104 34080-0102 34080-1102 34080-0206 34080-1206 34080-0204 34080-1204 34080-0202 34080-1202 PAYOFF DIRECTION RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) A ±0.3 B ±0.20 C ±0.3 D ±0.15 N ±0.10 22AWG 0.35-0.50mm 2.5 4.85 0.9 2.90 0.55 18 20/18AWG 0.75-1.00mm 3.3 5.00 1.3 2.90 0.70 14 16/14AWG 1.50-2.00mm 3.6 5.00 1.7 2.90 0.90 22 22AWG 0.35-0.50mm 2.5 4.85 0.9 2.90 0.55 18 20/18AWG 0.75-1.00mm 3.3 5.00 1.3 2.90 0.70 16/14AWG 1.50-2.00mm 3.6 22AWG 0.35-0.50mm 2.5 GRIP CODE WIRE SIZES 22 14 22 * HIGH PERFORMANCE Sn 5.00 1.7 2.90 HIGH PERFORMANCE Au SYMBOLS = 0 0.90 = 0 3.3 16/14AWG 1.50-2.00mm 14 D C 20/18AWG 0.75-1.00mm 18 SPECIAL CHARACTERISTICS 3.6 4.85 5.00 5.00 0.9 1.3 1.7 * A 2.90 2.90 2.90 0.55 = 0 HIGH PERFORMANCE Ag 0.70 0.90 FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 P1 18 RELEASE DATE 17 2019/12/23 16 18:21:17 C 15 14 13 12 11 10 9 8 mm 5:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.10 1 PLACE ± 0.3 0 PLACES ± = 0 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS SCALE ANGULAR TOL = 0 SEE AS-34080-001 FOR SPECIFIC WIRE TYPES THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 628017 DRWN: NVENKATESHSH CHK'D: TOMSMITH APPR: TOMSMITH INITIAL REVISION: DRWN: KFERGUSON APPR: BMOSER THIRD ANGLE PROJECTION 5 MX 150 BLADE CABLE SEAL 2019/05/11 2019/12/23 2019/12/23 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2008/06/09 2008/09/06 DRAWING SERIES D-SIZE 34080 4 SD-34080-001 MATERIAL NUMBER SEE TABLE 3 PSD 001 C3 SHEET NUMBER CUSTOMER GENERAL MARKET 2 1 OF 1 1 A