0348994080

20 19 K 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 TABLE OF CONTENTS M L 18 M SHEET NO. SHEET DESCRIPTION 1 NOTES 2 1x2 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS 3 1x3 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS 4 CLIP-SLOT CONFIGURATIONS 5 BLADE SEALED ASSEMBLY 6 CONNECTION SYSTEM PACKAGING 7 WIRE DRESS COVER INTERFACE OPTIONS 8 1x2 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 1 9 1x2 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 2 10 1x3 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 1 11 1x3 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 2 L K NOTES: VALID UNLESS OTHERWISE SPECIFIED B 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34900-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. b. PRODUCT SPECIFICATION SEE: PS-34900-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31301-898 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) J CONNECTOR HOUSING H A17 F A14 CORRECTED CHARTED DIMENSION 3 FOR 1X3 11MM CLIPSLOT A12 1X2 KEYS A&B W/ WDC SALEABLE A11 CORRECTED REVISION LOG A10 D INSPECTION NUMBER LOG LAST NUMBER USED: ADDED: REMOVED: G 1X2,1X3 WIRE DRESS FEATURES OK TO TOOL A9 1X2,1X3 PART # STATUS UPDATED A8 1X2 40G CLIP-SLOT OK TO TOOL A7 1X2,1X3 PART # UPDATED TO "TOOLED BUT NOT VALIDATED" A6 ADDED 40G CLIP-SLOT PART NUMBERS A5 BOM CORRECTIONS AND UPDATES A4 BOM CORRECTIONS AND UPDATES A3 1x2, 1x3 NON-SIR PART# OK TO TOOL A2 ADDED 1x3 11mm CLIP-SLOT PART # F E A ADDED BLACK PART# AND MINOR BOM UPDATES 6 ADDED CLIP SLOT CONFIGURATIONS 5 1X3 BOM UPDATED 4 1X3 INLINE ASSY VIEWS ADDED 3 MINOR BOM CORRECTIONS 2 UPDATED PACKAGING DIMENSIONS 1 INITIAL RELEASE REV D DESCRIPTION THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B 1x2 BLADE SEALED ASSEMBLY A H A13 1x3 KEY A&B SALEABLE (NON 40G) E C J - NX-REMASTERING FROM MODEL MANAGER - 1x2 KEY C MOVED TO SALEABLE A15 - 1X3 WDC INTERFACE 2 PART NUMBERS UPDATED TO MATCH E-DRAWING 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR PRIMARY LOCK REINFORCEMENT (PLR) NOTE ADDED ON PRESENCE OF SHARKFINS A16 CHANGED PNs TO OBSOLETE STATUS 2. DESIGN - MATERIALS: a. SEE BOM TABLE G PART NUMBERS OBSOLETE DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 1x3 BLADE SEALED ASSEMBLY ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 1 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M 1x2 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. 2.10 L L K K KEYING OPTION A J J 0.00 H H G G KEYING OPTION B 2.10 F F E E KEYING OPTION C D D 1.60 0.10 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 5:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B KEYING OPTION E A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 2 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M 1x3 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L 3.20 K K KEYING OPTION A J J 1.40 H H G G KEYING OPTION B 1.40 F F E E KEYING OPTION C D D 3.20 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 5:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B KEYING OPTION D A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 3 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M CLIP-SLOT CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L K K 7mm CLIP-SLOT OPTION J J H H G G F F E E 11mm CLIP-SLOT OPTION D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) 40G CLIP-SLOT OPTION B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 4 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 M 2 1 M BLADE SEALED ASSEMBLY L L LASER MARKING ON THIS W SURFACE SEE NOTE 3g X 4.00 ⌀C MINIMUM PASS-THRU K K 3 B ±0.50 SECOND SHARKFIN ONLY PRESENT ON 1X2 PNs J J W 44 ±0.50 1 A ±0.50 2 X TERMINAL POSITION 2 TERMINAL POSITION 1 REAR VIEW (WIRE HARNESS SIDE) H H G G F F E 1x3 BLADE SEALED ASSEMBLY, 40G CLIP SLOT 19 16.75 21.75 1x3 BLADE SEALED ASSEMBLY, 11mm CLIP SLOT 19 14.6 20.75 1x3 BLADE SEALED ASSEMBLY, 7mm CLIP SLOT 19 17 20.5 1x2 BLADE SEALED ASSEMBLY, 40G CLIP SLOT 15 16.75 20.25 1x2 BLADE SEALED ASSEMBLY, 11mm CLIP SLOT 15 15.5 19 1x2 BLADE SEALED ASSEMBLY, 7mm CLIP SLOT 15 17 18.75 CONFIGURATION A B C E CHARTED DIMENSIONS 4 D D 15.0 ±0.50 ±0.50 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN THE PRE-STAGED POSITION B IN THE FINAL-LOCK POSITION SECTION W-W A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 SECTION X-X ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 5 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 M 4 3 2 1 M CONNECTION SYSTEM PACKAGING L L K K J J ⌀D (53.0) OVERALL MATED SYSTEM MIN. PASS-THRU WITH NO CLEARANCE H H G G F F E E D D C 1x3 RECEPTACLE MATED TO 1x3 BLADE, 40 CLIP SLOT TBD 1x3 RECEPTACLE MATED TO 1x3 BLADE, 11mm CLIP SLOT 24.0 1x3 RECEPTACLE MATED TO 1x3 BLADE, 7mm CLIP SLOT 23.0 1x2 RECEPTACLE MATED TO 1x2 BLADE, 40G CLIP SLOT 23.0 1x2 RECEPTACLE MATED TO 1x2 BLADE, 11mm CLIP SLOT 23.0 1x2 RECEPTACLE MATED TO 1x2 BLADE, 7mm CLIP SLOT 23.0 1.2mm CONNECTION SYSTEM CONFIGURATION B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 D mm 6:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 SCALE 15 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) CHARTED DIMENSIONS A DIMENSION UNITS 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 6 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M WDC1-2 WDC2-2 E L WDC1-1 F 3 CIRCUIT 18.8 10.8 5.4 15.7 7.7 2.45 2 CIRCUIT 14.8 10.8 5.4 11.7 7.7 2.45 CONFIGURATION A B C E F G 18.8 10.8 5.4 15.9 7.9 3.7 2 CIRCUIT 14.8 10.3 5.4 11.9 7.9 3.7 CONFIGURATION A B C E F G CHARTED DIMENSIONS F ±0.2 CHARTED DIMENSIONS WDC1-3 SECTION Z-Z E ±0.3 3 CIRCUIT L WDC2-1 (4x) RG SECTION Y-Y (4x) RG ±0.4 WDC2-2 K K WDC1-6 A WDC2-6 A ±0.15 J WDC1-4 C B WDC1-5 WDC2-4 B ±0.15 J C ±0.1 WDC2-5 (4x) R 4.00 WDC1-7 (4x) R 4 ±0.1 WDC2-7 H H WDC1-8 R 0.65 WDC1-9 Z 1.50 WDC2-8 WDC2-9 R 0.35 Z 1.50 Y G 5.25 WDC1-10 Y G 6.00 WDC2-10 F F WIRE DRESS COVER WIRE DRESS COVER INTERFACE OPTION 1 E INTERFACE OPTION 2 WIRE DRESS COVERS E BASED ON HIRSCHMANN INTERFACE NOT AVAILABLE DRAWING 808-012-xxx REV B5 D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 7 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M 1x2 BLADE SEALED ASSEMBLY BOM L K J 34899-2043 1 KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY 34899-2042 1 KEYING OPTION B, 11mm CLIP SLOT, LIGHT GRAY 34899-2041 1 KEYING OPTION A, 11mm CLIP SLOT, BLACK 34899-2040 1 KEYING OPTION E, 11mm CLIP SLOT, YELLOW 34899-2033 1 KEYING OPTION C, 11mm CLIP SLOT, YELLOW 34899-2032 1 KEYING OPTION B, 11mm CLIP SLOT, YELLOW 34899-2031 1 KEYING OPTION A, 11mm CLIP SLOT, YELLOW 34899-2030 1 KEYING OPTION E, 7mm CLIP SLOT, STONE GRAY 34899-2023 1 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-2022 1 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-2021 1 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-2020 1 KEYING OPTION E, 7mm CLIP SLOT, YELLOW 34899-2013 1 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-2012 1 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-2011 1 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-2010 1 ASSEMBLY PART NUMBER WIRE DRESS COVER INTERFACE OPTION ASSEMBLY DESCRIPTION FOR WIRE DRESS COVER INTERFACE 1 CONCEPT E KEYING OPTION E, 11mm CLIP SLOT, STONE GRAY CONCEPT C REFER WIRE DRESS COVER INTERFACE SHEET CONCEPT B CONCEPT A FOR DETAILS CONCEPT E CONCEPT C L CONCEPT B CONCEPT A K OBSOLETE E OBSOLETE C OBSOLETE B OBSOLETE A TOOLED BUT NOT VALIDATED E SALEABLE C OBSOLETE B J SALEABLE A PRODUCTION TOOL STATUS COMMENTS H H G F E PLR NATURAL SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 11mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT BLACK SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C E CONNECTOR HOUSING KEYING OPTION E C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 8 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M 1x2 BLADE SEALED ASSEMBLY BOM L L FOR WIRE DRESS COVER INTERFACE 2 REFER WIRE DRESS COVER INTERFACE SHEET K J KEYING OPTION A, 40G CLIP SLOT, BLACK 34899-2060 2 KEYING OPTION A, 40G CLIP SLOT, YELLOW 34899-2050 2 KEYING OPTION E, 7mm CLIP SLOT, STONE GRAY 34899-2083 2 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-2082 2 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-2081 2 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-2080 2 KEYING OPTION E, 7mm CLIP SLOT, YELLOW 34899-2073 2 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-2072 2 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-2071 2 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-2070 2 ASSEMBLY PART NUMBER WIRE DRESS COVER INTERFACE OPTION ASSEMBLY DESCRIPTION A A E FOR DETAILS OK TO TOOL OK TO TOOL OK TO TOOL K SALEABLE C SALEABLE B SALEABLE A OK TO TOOL E SALEABLE C SALEABLE B J SALEABLE A PRODUCTION TOOL STATUS COMMENTS H H G G F E PLR NATURAL SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT BLACK SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C E CONNECTOR HOUSING KEYING OPTION E C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 9 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M L K J 34899-3043 1 KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY 34899-3042 1 KEYING OPTION B, 11mm CLIP SLOT, LIGHT GRAY 34899-3041 1 KEYING OPTION A, 11mm CLIP SLOT, BLACK 34899-3040 1 KEYING OPTION D, 11mm CLIP SLOT, YELLOW 34899-3033 1 KEYING OPTION C, 11mm CLIP SLOT, YELLOW 34899-3032 1 KEYING OPTION B, 11mm CLIP SLOT, YELLOW 34899-3031 1 KEYING OPTION A, 11mm CLIP SLOT, YELLOW 34899-3030 1 KEYING OPTION D, 7mm CLIP SLOT, STONE GRAY 34899-3023 1 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-3022 1 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-3021 1 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-3020 1 KEYING OPTION D, 7mm CLIP SLOT, YELLOW 34899-3013 1 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-3012 1 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-3011 1 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-3010 1 ASSEMBLY PART NUMBER WIRE DRESS COVER INTERFACE OPTION ASSEMBLY DESCRIPTION OBSOLETE EM-34899-3033 OBSOLETE EM-34899-3032 OBSOLETE EM-34899-3031 OBSOLETE EM-34899-3030 TOOLED BUT NOT VALIDATED EM-34899-3033 TOOLED BUT NOT VALIDATED EM-34899-3032 OBSOLETE EM-34899-3031 OBSOLETE EM-34899-3030 OBSOLETE EM-34899-3013 OBSOLETE EM-34899-3012 OBSOLETE EM-34899-3011 SALEABLE EM-34899-3010 TOOLED BUT NOT VALIDATED EM-34899-3013 TOOLED BUT NOT VALIDATED EM-34899-3012 OBSOLETE EM-34899-3011 SALEABLE EM-34899-3010 D KEYING OPTION D, 11mm CLIP SLOT, STONE GRAY C B A D C B A D C B A D C B A PRODUCTION TOOL STATUS COMMENTS 1x3 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 1 REFER WIRE DRESS COVER INTERFACE SHEET FOR DETAILS L K J MODEL NUMBER H H G F E PLR NATURAL SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT BLACK SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C D CONNECTOR HOUSING KEYING OPTION D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 10 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M L K J A KEYING OPTION A, 40-G CLIP SLOT, BLACK 34899-3060 2 KEYING OPTION A, 40-G CLIP SLOT, YELLOW 34899-3050 2 KEYING OPTION D, 11mm CLIP SLOT, STONE GRAY 34899-3123 2 KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY 34899-3122 2 KEYING OPTION B, 11mm CLIP SLOT, LIGHT GRAY 34899-3121 2 KEYING OPTION A, 11mm CLIP SLOT, BLACK 34899-3120 2 KEYING OPTION D, 11mm CLIP SLOT, YELLOW 34899-3113 2 KEYING OPTION C, 11mm CLIP SLOT, YELLOW 34899-3112 2 KEYING OPTION B, 11mm CLIP SLOT, YELLOW 34899-3111 2 KEYING OPTION A, 11mm CLIP SLOT, YELLOW 34899-3110 2 KEYING OPTION D, 7mm CLIP SLOT, STONE GRAY 34899-3083 2 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-3082 2 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-3081 2 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-3080 2 KEYING OPTION D, 7mm CLIP SLOT, YELLOW 34899-3073 2 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-3072 2 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-3071 2 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-3070 2 ASSEMBLY PART NUMBER WIRE DRESS COVER INTERFACE OPTION ASSEMBLY DESCRIPTION A D C B A D C B A D C B A D C B A CONCEPT EM-34899-3050 CONCEPT EM-34899-3050 OK TO TOOL EM-34899-3033 OK TO TOOL EM-34899-3032 SALEABLE EM-34899-3031 SALEABLE EM-34899-3030 OK TO TOOL EM-34899-3033 OK TO TOOL EM-34899-3032 SALEABLE EM-34899-3031 SALEABLE EM-34899-3030 OK TO TOOL EM-34899-3073 OK TO TOOL EM-34899-3072 SALEABLE EM-34899-3071 SALEABLE EM-34899-3070 OK TO TOOL EM-34899-3073 OK TO TOOL EM-34899-3072 SALEABLE EM-34899-3071 SALEABLE EM-34899-3070 PRODUCTION TOOL STATUS H G F E COMMENTS 1x3 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 2 REFER WIRE DRESS COVER INTERFACE SHEET FOR DETAILS L K J MODEL NUMBER PLR NATURAL SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT BLACK SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT BLACK SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL H G F E BOM/APPLICABLE COMPONENTS TABLE D D C B A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C D DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 DIMENSION UNITS SCALE mm 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± CONNECTOR HOUSING KEYING OPTION C 4 PLACES ± CONNECTOR HOUSING KEYING OPTION D 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 RELEASE DATE 18 2020/11/30 17 CURRENT REV DESC: OBSOLETE PART NUMBER DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 3.0 ° 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 11 OF 11 1 A 20 19 K 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 TABLE OF CONTENTS M L 18 M SHEET NO. SHEET DESCRIPTION 1 NOTES 2 1x4 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS 3 1x6 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS 4 CLIP-SLOT CONFIGURATIONS 5 BLADE SEALED ASSEMBLY 6 CONNECTION SYSTEM PACKAGING 7 WIRE DRESS COVER INTERFACE OPTIONS 8 1x4 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 1 9 1x4 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 2 10 1x6 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 1 11 1x6 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 2 J L NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34900-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. b. PRODUCT SPECIFICATION SEE: PS-34900-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31301-898 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-301 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) CONNECTOR HOUSING K J 2. DESIGN - MATERIALS: a. SEE BOM TABLE H H 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) CAD MODEL. g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR PRIMARY LOCK REINFORCEMENT (PLR) G F C B16 NX-REMASTERING FROM MODEL MANAGER CHANGED PN STATUSES TO OBSOLETE B15 UPDATED BALLOONS 2-1 & 2-2 ON SHEET 7 B14 UPDATED PARTS TO SALEABLE B13 RELEASED PRIMARY KEYS NON-SIR SALEABLE B12 UPDATED PLR LOCK UP GEOMETRY B11 UPDATED WDC INTERFACE PART# TO TOOLED BUT NOT VALIDATED B10 UPDATED TOLERANCES WDC FEATURES 1X4 40G CLIP-SLOT OK TO TOOL B7 1X4 PART # UPDATED TO "TOOLED BUT NOT VALIDATED" B6 ADDED 40G CLIP-SLOT PART NUMBERS B5 BOM CORRECTIONS AND UPDATES B4 BOM CORRECTIONS AND UPDATES B3 1x4, 1x6 NON-SIR PART# OK TO TOOL PER DRAWING REVISION: B12 B2 1x6 11mm CLIP SLOT PART # OK TO TOOL LAST BALLOON NUMBER USED: WDC2-10 B1 1x6 11mm CLIP SLOT PART NUMBERS ADDED REMOVED BALLON NUMBERS: B ADDED 1x4 INFORMATION A OK TO TOOL REV G F B8 ADDED BALLON NUMBERS: WDC2-1 - WDC2-10 E D DESCRIPTION THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) 1x6 BLADE SEALED ASSEMBLY 1x4 BLADE SEALED ASSEMBLY B A ADDED NOTE ON SHARKFIN PRESENCE B9 INSPECTION BALLOON NUMBER LOG C B17 1X4, 1X6 PART # WIRE DRESS COVER INTERFACE FEATURES OK TO TOOL E D OBSOLETE PART NUMBER DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 1 OF 11 1 A 20 19 18 17 16 15 14 M 0.00 4.80 13 12 11 10 9 7 8 5 6 4 3 2 1 M 1x4 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L K K KEYING OPTION A KEYING OPTION F 3.20 1.60 J J H H KEYING OPTION B KEYING OPTION G 1.60 G G F F KEYING OPTION C 4.80 E E D D KEYING OPTION D 3.20 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B KEYING OPTION E A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 2 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M 1x6 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L 8.00 K K KEYING OPTION A J J 4.00 H H G G KEYING OPTION B 4.00 F F E E KEYING OPTION C D D 8.00 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B KEYING OPTION D A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 3 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M CLIP-SLOT CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L K K J J 7MM CLIP-SLOT OPTION H H G G F F 11MM CLIP-SLOT OPTION E E D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C B DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 mm 4:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 SCALE 15 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) 40G CLIP-SLOT OPTION A DIMENSION UNITS 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 4 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M BLADE SEALED ASSEMBLY LASER MARKING ON V THIS SURFACE SEE NOTE 3g L L 4.00 ⌀C TYP T MIN. PASS-THRU WITH NO CLEARANCE K K 3 B ±0.50 J J SECOND SHARKFIN ONLY V PRESENT ON 1X6 PNs T 44 ±0.50 TERMINAL POSITION 1 TERMINAL POSITION 6 1 H H G G F F 17.5 32.75 1x6 BLADE SEALED ASSEMBLY, 11mm CLIP SLOT 16 32.75 1x6 BLADE SEALED ASSEMBLY, 7mm CLIP SLOT 17.25 32.75 1x4 BLADE SEALED ASSEMBLY, 40G CLIP SLOT 17.5 25.25 16 24.75 1x6 BLADE SEALED ASSEMBLY, 40G CLIP SLOT E 1x4 BLADE SEALED ASSEMBLY, 11mm CLIP SLOT 1x4 BLADE SEALED ASSEMBLY, 7mm CLIP SLOT 4 17.25 24.75 CONFIGURATION 15.0 ±0.50 D E B C D CHARTED DIMENSIONS C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) SECTION V-V PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN B A SECTION T-T IN THE FINAL-LOCK POSITION IN THE PRE-STAGED POSITION DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 5 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M CONNECTION SYSTEM PACKAGING L L K K ⌀D J MIN. PASS-THRU WITH (53) OVERALL MATED SYSTEM J NO CLEARANCE H H G G F F MODEL USED "AM-120-S-006-1-Z01" E E D D C 1x6 RECEPTACLE MATED TO 1x6 BLADE, 40 CLIP SLOT TBD 1x6 RECEPTACLE MATED TO 1x6 BLADE, 11mm CLIP SLOT 33.5 1x6 RECEPTACLE MATED TO 1x6 BLADE, 7mm CLIP SLOT 33.5 1x4 RECEPTACLE MATED TO 1x4 BLADE, 40G CLIP SLOT 25.50 1x4 RECEPTACLE MATED TO 1x4 BLADE, 11mm CLIP SLOT 25.50 1x4 RECEPTACLE MATED TO 1x4 BLADE, 7mm CLIP SLOT 25.50 1.2mm CONNECTION SYSTEM CONFIGURATION THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C D B DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 mm 6:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 SCALE 15 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) CHARTED DIMENSIONS A DIMENSION UNITS 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 6 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M WDC1-1 6 CIRCUIT 30.8 10.8 5.4 27.4 7.6 3.0 4 CIRCUIT 22.8 10.8 5.4 19.4 7.6 3.0 CONFIGURATION A B C E F G E L WDC1-3 WDC2-1 CHARTED DIMENSIONS F WDC2-3 12.2 6.1 29.3 9.3 4.2 4 CIRCUIT 24.2 12.2 6.1 21.3 9.3 4.2 CONFIGURATION A B C E F G L CHARTED DIMENSIONS WDC2-2 (4x) RG SECTION W-W 32.2 F ±0.2 WDC1-2 K 6 CIRCUIT E ±0.3 (4x) RG ±0.4 SECTION Y-Y K (4x) R 4 ±0.1 WDC2-6 (4x) R 4.00 WDC1-6 WDC1-4 WDC2-5 B ±0.15 J C C ±0.1 WDC2-4 J WDC1-5 B WDC2-7 H H A ±0.15 2 WDC1-7 R 0.35 A WDC2-8 2 R 0.65 WDC1-8 1.50 Y Y 1.50 WDC1-9 W G WDC2-9 W G 6.00 WDC1-10 F WDC2-10 5.25 F WIRE DRESS COVER WIRE DRESS COVER INTERFACE OPTION 1 INTERFACE OPTION 2 WIRE DRESS COVERS E BASED ON HIRSCHMANN INTERFACE NOT AVAILABLE E DRAWING 808-012-xxx REV B5 D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 7 OF 11 1 A 20 19 18 M L K J 17 16 15 14 13 12 KEYING OPTION G, 11mm CLIP SLOT, LIGHT GRAY KEYING OPTION F, 11mm CLIP SLOT, BLACK 34899-4043 34899-4042 KEYING OPTION E, 11mm CLIP SLOT, DARK GRAY 34899-4041 KEYING OPTION D, 11mm CLIP SLOT, LIGHT GRAY KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY KEYING OPTION B, 11mm CLIP SLOT, STONE GRAY KEYING OPTION A, 11mm CLIP SLOT, BLACK KEYING OPTION G, 11mm CLIP SLOT, YELLOW KEYING OPTION F, 11mm CLIP SLOT, YELLOW KEYING OPTION E, 11mm CLIP SLOT, YELLOW KEYING OPTION D, 11mm CLIP SLOT, YELLOW KEYING OPTION C, 11mm CLIP SLOT, YELLOW KEYING OPTION B, 11mm CLIP SLOT, YELLOW KEYING OPTION A, 11mm CLIP SLOT, YELLOW KEYING OPTION G, 7mm CLIP SLOT, LIGHT GRAY KEYING OPTION F, 7mm CLIP SLOT, BLACK KEYING OPTION E, 7mm CLIP SLOT, DARK GRAY KEYING OPTION D, 7mm CLIP SLOT, LIGHT GRAY KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY KEYING OPTION B, 7mm CLIP SLOT, STONE GRAY KEYING OPTION A, 7mm CLIP SLOT, BLACK KEYING OPTION G, 7mm CLIP SLOT, YELLOW KEYING OPTION F, 7mm CLIP SLOT, YELLOW KEYING OPTION E, 7mm CLIP SLOT, YELLOW KEYING OPTION D, 7mm CLIP SLOT, YELLOW KEYING OPTION C, 7mm CLIP SLOT, YELLOW KEYING OPTION B, 7mm CLIP SLOT, YELLOW KEYING OPTION A, 7mm CLIP SLOT, YELLOW D 34899-4040 34899-4039 C B 34899-4038 A 34899-4037 34899-4036 G F 34899-4035 E 34899-4034 D 34899-4033 34899-4032 C B 34899-4031 A 34899-4030 34899-4026 G F 34899-4025 E 34899-4024 D 34899-4023 34899-4022 C B 34899-4021 A 34899-4020 34899-4016 G F 34899-4015 E 34899-4014 D 34899-4013 34899-4012 C B 34899-4011 34899-4010 A G F E ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION 11 10 9 CONCEPT CONCEPT CONCEPT CONCEPT OBSOLETE OBSOLETE OBSOLETE CONCEPT CONCEPT CONCEPT CONCEPT CONCEPT CONCEPT CONCEPT OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE PRODUCTION TOOL STATUS 7 8 5 6 4 3 2 1 M 1x4 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 1 REFER WIRE DRESS INTERFACE SHEET FOR DETAILS L K J COMMENTS H H G F E PLR 1x4 CONNECTOR HOUSING, KEYING OPTION G 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION F 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION E 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION G 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION F 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION E 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION G 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION F 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION G 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION F 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT NATURAL LIGHT GRAY BLACK DARK GRAY LIGHT GRAY DARK GRAY STONE GRAY BLACK YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW LIGHT GRAY BLACK DARK GRAY LIGHT GRAY DARK GRAY STONE GRAY BLACK YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C D CONNECTOR HOUSING KEYING OPTION D E CONNECTOR HOUSING KEYING OPTION E F CONNECTOR HOUSING KEYING OPTION F G CONNECTOR HOUSING KEYING OPTION G PLR PLR C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 mm 2:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 SCALE CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DIMENSION UNITS 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 8 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M L K J KEYING OPTION A, 40G CLIP SLOT, BLACK 34899-4060 KEYING OPTION A, 40G CLIP SLOT, YELLOW 34899-4050 KEYING OPTION G, 7mm CLIP SLOT, LIGHT GRAY 34899-4086 KEYING OPTION F, 7mm CLIP SLOT, BLACK 34899-4085 KEYING OPTION E, 7mm CLIP SLOT, DARK GRAY 34899-4084 KEYING OPTION D, 7mm CLIP SLOT, LIGHT GRAY 34899-4083 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-4082 KEYING OPTION B, 7mm CLIP SLOT, STONE GRAY 34899-4081 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-4080 KEYING OPTION G, 7mm CLIP SLOT, YELLOW 34899-4076 KEYING OPTION F, 7mm CLIP SLOT, YELLOW 34899-4075 KEYING OPTION E, 7mm CLIP SLOT, YELLOW 34899-4074 KEYING OPTION D, 7mm CLIP SLOT, YELLOW 34899-4073 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-4072 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-4071 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-4070 A A TOOLED BUT NOT VALIDATED TOOLED BUT NOT VALIDATED SALEABLE G SALEABLE F SALEABLE E L SALEABLE D SALEABLE C SALEABLE B K SALEABLE A SALEABLE G SALEABLE F SALEABLE E SALEABLE D SALEABLE C SALEABLE B J SALEABLE A ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION 1x4 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 2 REFER WIRE DRESS INTERFACE SHEET FOR DETAILS PRODUCTION TOOL STATUS COMMENTS H H G F E PLR NATURAL SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT BLACK SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION G 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION F 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION G 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION F 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C D CONNECTOR HOUSING KEYING OPTION D E CONNECTOR HOUSING KEYING OPTION E F CONNECTOR HOUSING KEYING OPTION F G CONNECTOR HOUSING KEYING OPTION G PLR PLR C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 mm 1:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 SCALE CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DIMENSION UNITS 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 9 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 M L K J KEYING OPTION A, 40-G CLIP SLOT, BLACK 34899-6070 KEYING OPTION A, 40-G CLIP SLOT, YELLOW 34899-6050 KEYING OPTION D, 11mm CLIP SLOT, STONE GRAY 34899-6063 KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY 34899-6062 KEYING OPTION B, 11mm CLIP SLOT, LIGHT GRAY 34899-6061 KEYING OPTION A, 11mm CLIP SLOT, BLACK 34899-6060 KEYING OPTION D, 11mm CLIP SLOT, YELLOW 34899-6043 KEYING OPTION C, 11mm CLIP SLOT, YELLOW 34899-6042 KEYING OPTION B, 11mm CLIP SLOT, YELLOW 34899-6041 KEYING OPTION A, 11mm CLIP SLOT, YELLOW 34899-6040 KEYING OPTION D, 7mm CLIP SLOT, STONE GRAY 34899-6023 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-6022 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-6021 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-6020 KEYING OPTION D, 7mm CLIP SLOT, YELLOW 34899-6013 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-6012 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-6011 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-6010 OBSOLETE D OBSOLETE C OBSOLETE B OBSOLETE A 3 2 1 M L SALEABLE D SALEABLE C OBSOLETE B SALEABLE A K OBSOLETE D OBSOLETE C OBSOLETE B OBSOLETE A SALEABLE D SALEABLE C OBSOLETE B J SALEABLE A ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION CONCEPT A 4 1x6 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 1 REFER WIRE DRESS INTERFACE SHEET FOR DETAILS CONCEPT A 5 6 PRODUCTION TOOL STATUS H G F E COMMENTS PLR NATURAL SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT BLACK SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT BLACK SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL H G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C D CONNECTOR HOUSING KEYING OPTION D PLR PLR C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 10 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M L K J KEYING OPTION D, 11mm CLIP SLOT, STONE GRAY 34899-6123 KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY 34899-6122 KEYING OPTION B, 11mm CLIP SLOT, LIGHT GRAY 34899-6121 KEYING OPTION A, 11mm CLIP SLOT, BLACK 34899-6120 KEYING OPTION D, 11mm CLIP SLOT, YELLOW 34899-6113 KEYING OPTION C, 11mm CLIP SLOT, YELLOW 34899-6112 KEYING OPTION B, 11mm CLIP SLOT, YELLOW 34899-6111 KEYING OPTION A, 11mm CLIP SLOT, YELLOW 34899-6110 KEYING OPTION D, 7mm CLIP SLOT, STONE GRAY 34899-6093 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-6092 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-6091 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-6090 KEYING OPTION D, 7mm CLIP SLOT, YELLOW 34899-6083 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-6082 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-6081 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-6080 D C SALEABLE SALEABLE SALEABLE B SALEABLE A SALEABLE D L SALEABLE C SALEABLE B SALEABLE A K SALEABLE D SALEABLE C SALEABLE B SALEABLE A SALEABLE D SALEABLE C SALEABLE B J SALEABLE A ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION 1x6 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 2 REFER WIRE DRESS INTERFACE SHEET FOR DETAILS PRODUCTION TOOL STATUS COMMENTS H H G F E PLR NATURAL SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT BLACK SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C D CONNECTOR HOUSING KEYING OPTION D PLR PLR C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 11 OF 11 1 A