0348996011

20 19 K 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 TABLE OF CONTENTS M L 18 M SHEET NO. SHEET DESCRIPTION 1 NOTES 2 1x2 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS 3 1x3 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS 4 CLIP-SLOT CONFIGURATIONS 5 BLADE SEALED ASSEMBLY 6 CONNECTION SYSTEM PACKAGING 7 WIRE DRESS COVER INTERFACE OPTIONS 8 1x2 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 1 9 1x2 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 2 10 1x3 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 1 11 1x3 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 2 L K NOTES: VALID UNLESS OTHERWISE SPECIFIED B 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34900-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. b. PRODUCT SPECIFICATION SEE: PS-34900-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31301-898 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) J CONNECTOR HOUSING H A17 F A14 CORRECTED CHARTED DIMENSION 3 FOR 1X3 11MM CLIPSLOT A12 1X2 KEYS A&B W/ WDC SALEABLE A11 CORRECTED REVISION LOG A10 D INSPECTION NUMBER LOG LAST NUMBER USED: ADDED: REMOVED: G 1X2,1X3 WIRE DRESS FEATURES OK TO TOOL A9 1X2,1X3 PART # STATUS UPDATED A8 1X2 40G CLIP-SLOT OK TO TOOL A7 1X2,1X3 PART # UPDATED TO "TOOLED BUT NOT VALIDATED" A6 ADDED 40G CLIP-SLOT PART NUMBERS A5 BOM CORRECTIONS AND UPDATES A4 BOM CORRECTIONS AND UPDATES A3 1x2, 1x3 NON-SIR PART# OK TO TOOL A2 ADDED 1x3 11mm CLIP-SLOT PART # F E A ADDED BLACK PART# AND MINOR BOM UPDATES 6 ADDED CLIP SLOT CONFIGURATIONS 5 1X3 BOM UPDATED 4 1X3 INLINE ASSY VIEWS ADDED 3 MINOR BOM CORRECTIONS 2 UPDATED PACKAGING DIMENSIONS 1 INITIAL RELEASE REV D DESCRIPTION THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B 1x2 BLADE SEALED ASSEMBLY A H A13 1x3 KEY A&B SALEABLE (NON 40G) E C J - NX-REMASTERING FROM MODEL MANAGER - 1x2 KEY C MOVED TO SALEABLE A15 - 1X3 WDC INTERFACE 2 PART NUMBERS UPDATED TO MATCH E-DRAWING 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR PRIMARY LOCK REINFORCEMENT (PLR) NOTE ADDED ON PRESENCE OF SHARKFINS A16 CHANGED PNs TO OBSOLETE STATUS 2. DESIGN - MATERIALS: a. SEE BOM TABLE G PART NUMBERS OBSOLETE DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 1x3 BLADE SEALED ASSEMBLY ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 1 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M 1x2 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. 2.10 L L K K KEYING OPTION A J J 0.00 H H G G KEYING OPTION B 2.10 F F E E KEYING OPTION C D D 1.60 0.10 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 5:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B KEYING OPTION E A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 2 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M 1x3 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L 3.20 K K KEYING OPTION A J J 1.40 H H G G KEYING OPTION B 1.40 F F E E KEYING OPTION C D D 3.20 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 5:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B KEYING OPTION D A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 3 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M CLIP-SLOT CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L K K 7mm CLIP-SLOT OPTION J J H H G G F F E E 11mm CLIP-SLOT OPTION D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) 40G CLIP-SLOT OPTION B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 4 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 M 2 1 M BLADE SEALED ASSEMBLY L L LASER MARKING ON THIS W SURFACE SEE NOTE 3g X 4.00 ⌀C MINIMUM PASS-THRU K K 3 B ±0.50 SECOND SHARKFIN ONLY PRESENT ON 1X2 PNs J J W 44 ±0.50 1 A ±0.50 2 X TERMINAL POSITION 2 TERMINAL POSITION 1 REAR VIEW (WIRE HARNESS SIDE) H H G G F F E 1x3 BLADE SEALED ASSEMBLY, 40G CLIP SLOT 19 16.75 21.75 1x3 BLADE SEALED ASSEMBLY, 11mm CLIP SLOT 19 14.6 20.75 1x3 BLADE SEALED ASSEMBLY, 7mm CLIP SLOT 19 17 20.5 1x2 BLADE SEALED ASSEMBLY, 40G CLIP SLOT 15 16.75 20.25 1x2 BLADE SEALED ASSEMBLY, 11mm CLIP SLOT 15 15.5 19 1x2 BLADE SEALED ASSEMBLY, 7mm CLIP SLOT 15 17 18.75 CONFIGURATION A B C E CHARTED DIMENSIONS 4 D D 15.0 ±0.50 ±0.50 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN THE PRE-STAGED POSITION B IN THE FINAL-LOCK POSITION SECTION W-W A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 SECTION X-X ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 5 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 M 4 3 2 1 M CONNECTION SYSTEM PACKAGING L L K K J J ⌀D (53.0) OVERALL MATED SYSTEM MIN. PASS-THRU WITH NO CLEARANCE H H G G F F E E D D C 1x3 RECEPTACLE MATED TO 1x3 BLADE, 40 CLIP SLOT TBD 1x3 RECEPTACLE MATED TO 1x3 BLADE, 11mm CLIP SLOT 24.0 1x3 RECEPTACLE MATED TO 1x3 BLADE, 7mm CLIP SLOT 23.0 1x2 RECEPTACLE MATED TO 1x2 BLADE, 40G CLIP SLOT 23.0 1x2 RECEPTACLE MATED TO 1x2 BLADE, 11mm CLIP SLOT 23.0 1x2 RECEPTACLE MATED TO 1x2 BLADE, 7mm CLIP SLOT 23.0 1.2mm CONNECTION SYSTEM CONFIGURATION B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 D mm 6:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 SCALE 15 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) CHARTED DIMENSIONS A DIMENSION UNITS 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 6 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M WDC1-2 WDC2-2 E L WDC1-1 F 3 CIRCUIT 18.8 10.8 5.4 15.7 7.7 2.45 2 CIRCUIT 14.8 10.8 5.4 11.7 7.7 2.45 CONFIGURATION A B C E F G 18.8 10.8 5.4 15.9 7.9 3.7 2 CIRCUIT 14.8 10.3 5.4 11.9 7.9 3.7 CONFIGURATION A B C E F G CHARTED DIMENSIONS F ±0.2 CHARTED DIMENSIONS WDC1-3 SECTION Z-Z E ±0.3 3 CIRCUIT L WDC2-1 (4x) RG SECTION Y-Y (4x) RG ±0.4 WDC2-2 K K WDC1-6 A WDC2-6 A ±0.15 J WDC1-4 C B WDC1-5 WDC2-4 B ±0.15 J C ±0.1 WDC2-5 (4x) R 4.00 WDC1-7 (4x) R 4 ±0.1 WDC2-7 H H WDC1-8 R 0.65 WDC1-9 Z 1.50 WDC2-8 WDC2-9 R 0.35 Z 1.50 Y G 5.25 WDC1-10 Y G 6.00 WDC2-10 F F WIRE DRESS COVER WIRE DRESS COVER INTERFACE OPTION 1 E INTERFACE OPTION 2 WIRE DRESS COVERS E BASED ON HIRSCHMANN INTERFACE NOT AVAILABLE DRAWING 808-012-xxx REV B5 D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 7 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M 1x2 BLADE SEALED ASSEMBLY BOM L K J 34899-2043 1 KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY 34899-2042 1 KEYING OPTION B, 11mm CLIP SLOT, LIGHT GRAY 34899-2041 1 KEYING OPTION A, 11mm CLIP SLOT, BLACK 34899-2040 1 KEYING OPTION E, 11mm CLIP SLOT, YELLOW 34899-2033 1 KEYING OPTION C, 11mm CLIP SLOT, YELLOW 34899-2032 1 KEYING OPTION B, 11mm CLIP SLOT, YELLOW 34899-2031 1 KEYING OPTION A, 11mm CLIP SLOT, YELLOW 34899-2030 1 KEYING OPTION E, 7mm CLIP SLOT, STONE GRAY 34899-2023 1 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-2022 1 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-2021 1 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-2020 1 KEYING OPTION E, 7mm CLIP SLOT, YELLOW 34899-2013 1 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-2012 1 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-2011 1 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-2010 1 ASSEMBLY PART NUMBER WIRE DRESS COVER INTERFACE OPTION ASSEMBLY DESCRIPTION FOR WIRE DRESS COVER INTERFACE 1 CONCEPT E KEYING OPTION E, 11mm CLIP SLOT, STONE GRAY CONCEPT C REFER WIRE DRESS COVER INTERFACE SHEET CONCEPT B CONCEPT A FOR DETAILS CONCEPT E CONCEPT C L CONCEPT B CONCEPT A K OBSOLETE E OBSOLETE C OBSOLETE B OBSOLETE A TOOLED BUT NOT VALIDATED E SALEABLE C OBSOLETE B J SALEABLE A PRODUCTION TOOL STATUS COMMENTS H H G F E PLR NATURAL SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 11mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT BLACK SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C E CONNECTOR HOUSING KEYING OPTION E C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 8 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M 1x2 BLADE SEALED ASSEMBLY BOM L L FOR WIRE DRESS COVER INTERFACE 2 REFER WIRE DRESS COVER INTERFACE SHEET K J KEYING OPTION A, 40G CLIP SLOT, BLACK 34899-2060 2 KEYING OPTION A, 40G CLIP SLOT, YELLOW 34899-2050 2 KEYING OPTION E, 7mm CLIP SLOT, STONE GRAY 34899-2083 2 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-2082 2 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-2081 2 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-2080 2 KEYING OPTION E, 7mm CLIP SLOT, YELLOW 34899-2073 2 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-2072 2 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-2071 2 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-2070 2 ASSEMBLY PART NUMBER WIRE DRESS COVER INTERFACE OPTION ASSEMBLY DESCRIPTION A A E FOR DETAILS OK TO TOOL OK TO TOOL OK TO TOOL K SALEABLE C SALEABLE B SALEABLE A OK TO TOOL E SALEABLE C SALEABLE B J SALEABLE A PRODUCTION TOOL STATUS COMMENTS H H G G F E PLR NATURAL SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT BLACK SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x2 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C E CONNECTOR HOUSING KEYING OPTION E C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 9 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M L K J 34899-3043 1 KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY 34899-3042 1 KEYING OPTION B, 11mm CLIP SLOT, LIGHT GRAY 34899-3041 1 KEYING OPTION A, 11mm CLIP SLOT, BLACK 34899-3040 1 KEYING OPTION D, 11mm CLIP SLOT, YELLOW 34899-3033 1 KEYING OPTION C, 11mm CLIP SLOT, YELLOW 34899-3032 1 KEYING OPTION B, 11mm CLIP SLOT, YELLOW 34899-3031 1 KEYING OPTION A, 11mm CLIP SLOT, YELLOW 34899-3030 1 KEYING OPTION D, 7mm CLIP SLOT, STONE GRAY 34899-3023 1 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-3022 1 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-3021 1 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-3020 1 KEYING OPTION D, 7mm CLIP SLOT, YELLOW 34899-3013 1 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-3012 1 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-3011 1 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-3010 1 ASSEMBLY PART NUMBER WIRE DRESS COVER INTERFACE OPTION ASSEMBLY DESCRIPTION OBSOLETE EM-34899-3033 OBSOLETE EM-34899-3032 OBSOLETE EM-34899-3031 OBSOLETE EM-34899-3030 TOOLED BUT NOT VALIDATED EM-34899-3033 TOOLED BUT NOT VALIDATED EM-34899-3032 OBSOLETE EM-34899-3031 OBSOLETE EM-34899-3030 OBSOLETE EM-34899-3013 OBSOLETE EM-34899-3012 OBSOLETE EM-34899-3011 SALEABLE EM-34899-3010 TOOLED BUT NOT VALIDATED EM-34899-3013 TOOLED BUT NOT VALIDATED EM-34899-3012 OBSOLETE EM-34899-3011 SALEABLE EM-34899-3010 D KEYING OPTION D, 11mm CLIP SLOT, STONE GRAY C B A D C B A D C B A D C B A PRODUCTION TOOL STATUS COMMENTS 1x3 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 1 REFER WIRE DRESS COVER INTERFACE SHEET FOR DETAILS L K J MODEL NUMBER H H G F E PLR NATURAL SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT BLACK SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C D CONNECTOR HOUSING KEYING OPTION D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 10 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M L K J A KEYING OPTION A, 40-G CLIP SLOT, BLACK 34899-3060 2 KEYING OPTION A, 40-G CLIP SLOT, YELLOW 34899-3050 2 KEYING OPTION D, 11mm CLIP SLOT, STONE GRAY 34899-3123 2 KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY 34899-3122 2 KEYING OPTION B, 11mm CLIP SLOT, LIGHT GRAY 34899-3121 2 KEYING OPTION A, 11mm CLIP SLOT, BLACK 34899-3120 2 KEYING OPTION D, 11mm CLIP SLOT, YELLOW 34899-3113 2 KEYING OPTION C, 11mm CLIP SLOT, YELLOW 34899-3112 2 KEYING OPTION B, 11mm CLIP SLOT, YELLOW 34899-3111 2 KEYING OPTION A, 11mm CLIP SLOT, YELLOW 34899-3110 2 KEYING OPTION D, 7mm CLIP SLOT, STONE GRAY 34899-3083 2 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-3082 2 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-3081 2 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-3080 2 KEYING OPTION D, 7mm CLIP SLOT, YELLOW 34899-3073 2 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-3072 2 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-3071 2 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-3070 2 ASSEMBLY PART NUMBER WIRE DRESS COVER INTERFACE OPTION ASSEMBLY DESCRIPTION A D C B A D C B A D C B A D C B A CONCEPT EM-34899-3050 CONCEPT EM-34899-3050 OK TO TOOL EM-34899-3033 OK TO TOOL EM-34899-3032 SALEABLE EM-34899-3031 SALEABLE EM-34899-3030 OK TO TOOL EM-34899-3033 OK TO TOOL EM-34899-3032 SALEABLE EM-34899-3031 SALEABLE EM-34899-3030 OK TO TOOL EM-34899-3073 OK TO TOOL EM-34899-3072 SALEABLE EM-34899-3071 SALEABLE EM-34899-3070 OK TO TOOL EM-34899-3073 OK TO TOOL EM-34899-3072 SALEABLE EM-34899-3071 SALEABLE EM-34899-3070 PRODUCTION TOOL STATUS H G F E COMMENTS 1x3 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 2 REFER WIRE DRESS COVER INTERFACE SHEET FOR DETAILS L K J MODEL NUMBER PLR NATURAL SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT BLACK SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT BLACK SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x3 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL H G F E BOM/APPLICABLE COMPONENTS TABLE D D C B A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C D DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 DIMENSION UNITS SCALE mm 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± CONNECTOR HOUSING KEYING OPTION C 4 PLACES ± CONNECTOR HOUSING KEYING OPTION D 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 RELEASE DATE 18 2020/11/30 17 CURRENT REV DESC: OBSOLETE PART NUMBER DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:20 16 3.0 ° 15 14 13 12 11 10 9 8 7 1.2MM 1X2, 1X3 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/16 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/02/15 2012/02/23 SERIES 34899 SD-34899-2001 MATERIAL NUMBER GENERAL MARKET 3 B SHEET NUMBER CUSTOMER SEE BOM 4 PSD 001 2 11 OF 11 1 A 20 19 K 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 TABLE OF CONTENTS M L 18 M SHEET NO. SHEET DESCRIPTION 1 NOTES 2 1x4 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS 3 1x6 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS 4 CLIP-SLOT CONFIGURATIONS 5 BLADE SEALED ASSEMBLY 6 CONNECTION SYSTEM PACKAGING 7 WIRE DRESS COVER INTERFACE OPTIONS 8 1x4 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 1 9 1x4 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 2 10 1x6 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 1 11 1x6 BLADE SEALED ASSEMBLY BOM INTERFACE OPTION 2 J L NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34900-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. b. PRODUCT SPECIFICATION SEE: PS-34900-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31301-898 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-301 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) CONNECTOR HOUSING K J 2. DESIGN - MATERIALS: a. SEE BOM TABLE H H 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) CAD MODEL. g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR PRIMARY LOCK REINFORCEMENT (PLR) G F C B16 NX-REMASTERING FROM MODEL MANAGER CHANGED PN STATUSES TO OBSOLETE B15 UPDATED BALLOONS 2-1 & 2-2 ON SHEET 7 B14 UPDATED PARTS TO SALEABLE B13 RELEASED PRIMARY KEYS NON-SIR SALEABLE B12 UPDATED PLR LOCK UP GEOMETRY B11 UPDATED WDC INTERFACE PART# TO TOOLED BUT NOT VALIDATED B10 UPDATED TOLERANCES WDC FEATURES 1X4 40G CLIP-SLOT OK TO TOOL B7 1X4 PART # UPDATED TO "TOOLED BUT NOT VALIDATED" B6 ADDED 40G CLIP-SLOT PART NUMBERS B5 BOM CORRECTIONS AND UPDATES B4 BOM CORRECTIONS AND UPDATES B3 1x4, 1x6 NON-SIR PART# OK TO TOOL PER DRAWING REVISION: B12 B2 1x6 11mm CLIP SLOT PART # OK TO TOOL LAST BALLOON NUMBER USED: WDC2-10 B1 1x6 11mm CLIP SLOT PART NUMBERS ADDED REMOVED BALLON NUMBERS: B ADDED 1x4 INFORMATION A OK TO TOOL REV G F B8 ADDED BALLON NUMBERS: WDC2-1 - WDC2-10 E D DESCRIPTION THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) 1x6 BLADE SEALED ASSEMBLY 1x4 BLADE SEALED ASSEMBLY B A ADDED NOTE ON SHARKFIN PRESENCE B9 INSPECTION BALLOON NUMBER LOG C B17 1X4, 1X6 PART # WIRE DRESS COVER INTERFACE FEATURES OK TO TOOL E D OBSOLETE PART NUMBER DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 1 OF 11 1 A 20 19 18 17 16 15 14 M 0.00 4.80 13 12 11 10 9 7 8 5 6 4 3 2 1 M 1x4 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L K K KEYING OPTION A KEYING OPTION F 3.20 1.60 J J H H KEYING OPTION B KEYING OPTION G 1.60 G G F F KEYING OPTION C 4.80 E E D D KEYING OPTION D 3.20 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B KEYING OPTION E A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 2 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M 1x6 BLADE SEALED ASSEMBLY KEYING CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L 8.00 K K KEYING OPTION A J J 4.00 H H G G KEYING OPTION B 4.00 F F E E KEYING OPTION C D D 8.00 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B KEYING OPTION D A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 3 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M CLIP-SLOT CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L K K J J 7MM CLIP-SLOT OPTION H H G G F F 11MM CLIP-SLOT OPTION E E D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C B DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 mm 4:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 SCALE 15 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) 40G CLIP-SLOT OPTION A DIMENSION UNITS 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 4 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M BLADE SEALED ASSEMBLY LASER MARKING ON V THIS SURFACE SEE NOTE 3g L L 4.00 ⌀C TYP T MIN. PASS-THRU WITH NO CLEARANCE K K 3 B ±0.50 J J SECOND SHARKFIN ONLY V PRESENT ON 1X6 PNs T 44 ±0.50 TERMINAL POSITION 1 TERMINAL POSITION 6 1 H H G G F F 17.5 32.75 1x6 BLADE SEALED ASSEMBLY, 11mm CLIP SLOT 16 32.75 1x6 BLADE SEALED ASSEMBLY, 7mm CLIP SLOT 17.25 32.75 1x4 BLADE SEALED ASSEMBLY, 40G CLIP SLOT 17.5 25.25 16 24.75 1x6 BLADE SEALED ASSEMBLY, 40G CLIP SLOT E 1x4 BLADE SEALED ASSEMBLY, 11mm CLIP SLOT 1x4 BLADE SEALED ASSEMBLY, 7mm CLIP SLOT 4 17.25 24.75 CONFIGURATION 15.0 ±0.50 D E B C D CHARTED DIMENSIONS C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) SECTION V-V PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN B A SECTION T-T IN THE FINAL-LOCK POSITION IN THE PRE-STAGED POSITION DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 5 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M CONNECTION SYSTEM PACKAGING L L K K ⌀D J MIN. PASS-THRU WITH (53) OVERALL MATED SYSTEM J NO CLEARANCE H H G G F F MODEL USED "AM-120-S-006-1-Z01" E E D D C 1x6 RECEPTACLE MATED TO 1x6 BLADE, 40 CLIP SLOT TBD 1x6 RECEPTACLE MATED TO 1x6 BLADE, 11mm CLIP SLOT 33.5 1x6 RECEPTACLE MATED TO 1x6 BLADE, 7mm CLIP SLOT 33.5 1x4 RECEPTACLE MATED TO 1x4 BLADE, 40G CLIP SLOT 25.50 1x4 RECEPTACLE MATED TO 1x4 BLADE, 11mm CLIP SLOT 25.50 1x4 RECEPTACLE MATED TO 1x4 BLADE, 7mm CLIP SLOT 25.50 1.2mm CONNECTION SYSTEM CONFIGURATION THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C D B DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 mm 6:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 SCALE 15 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) CHARTED DIMENSIONS A DIMENSION UNITS 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 6 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M WDC1-1 6 CIRCUIT 30.8 10.8 5.4 27.4 7.6 3.0 4 CIRCUIT 22.8 10.8 5.4 19.4 7.6 3.0 CONFIGURATION A B C E F G E L WDC1-3 WDC2-1 CHARTED DIMENSIONS F WDC2-3 12.2 6.1 29.3 9.3 4.2 4 CIRCUIT 24.2 12.2 6.1 21.3 9.3 4.2 CONFIGURATION A B C E F G L CHARTED DIMENSIONS WDC2-2 (4x) RG SECTION W-W 32.2 F ±0.2 WDC1-2 K 6 CIRCUIT E ±0.3 (4x) RG ±0.4 SECTION Y-Y K (4x) R 4 ±0.1 WDC2-6 (4x) R 4.00 WDC1-6 WDC1-4 WDC2-5 B ±0.15 J C C ±0.1 WDC2-4 J WDC1-5 B WDC2-7 H H A ±0.15 2 WDC1-7 R 0.35 A WDC2-8 2 R 0.65 WDC1-8 1.50 Y Y 1.50 WDC1-9 W G WDC2-9 W G 6.00 WDC1-10 F WDC2-10 5.25 F WIRE DRESS COVER WIRE DRESS COVER INTERFACE OPTION 1 INTERFACE OPTION 2 WIRE DRESS COVERS E BASED ON HIRSCHMANN INTERFACE NOT AVAILABLE E DRAWING 808-012-xxx REV B5 D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 7 OF 11 1 A 20 19 18 M L K J 17 16 15 14 13 12 KEYING OPTION G, 11mm CLIP SLOT, LIGHT GRAY KEYING OPTION F, 11mm CLIP SLOT, BLACK 34899-4043 34899-4042 KEYING OPTION E, 11mm CLIP SLOT, DARK GRAY 34899-4041 KEYING OPTION D, 11mm CLIP SLOT, LIGHT GRAY KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY KEYING OPTION B, 11mm CLIP SLOT, STONE GRAY KEYING OPTION A, 11mm CLIP SLOT, BLACK KEYING OPTION G, 11mm CLIP SLOT, YELLOW KEYING OPTION F, 11mm CLIP SLOT, YELLOW KEYING OPTION E, 11mm CLIP SLOT, YELLOW KEYING OPTION D, 11mm CLIP SLOT, YELLOW KEYING OPTION C, 11mm CLIP SLOT, YELLOW KEYING OPTION B, 11mm CLIP SLOT, YELLOW KEYING OPTION A, 11mm CLIP SLOT, YELLOW KEYING OPTION G, 7mm CLIP SLOT, LIGHT GRAY KEYING OPTION F, 7mm CLIP SLOT, BLACK KEYING OPTION E, 7mm CLIP SLOT, DARK GRAY KEYING OPTION D, 7mm CLIP SLOT, LIGHT GRAY KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY KEYING OPTION B, 7mm CLIP SLOT, STONE GRAY KEYING OPTION A, 7mm CLIP SLOT, BLACK KEYING OPTION G, 7mm CLIP SLOT, YELLOW KEYING OPTION F, 7mm CLIP SLOT, YELLOW KEYING OPTION E, 7mm CLIP SLOT, YELLOW KEYING OPTION D, 7mm CLIP SLOT, YELLOW KEYING OPTION C, 7mm CLIP SLOT, YELLOW KEYING OPTION B, 7mm CLIP SLOT, YELLOW KEYING OPTION A, 7mm CLIP SLOT, YELLOW D 34899-4040 34899-4039 C B 34899-4038 A 34899-4037 34899-4036 G F 34899-4035 E 34899-4034 D 34899-4033 34899-4032 C B 34899-4031 A 34899-4030 34899-4026 G F 34899-4025 E 34899-4024 D 34899-4023 34899-4022 C B 34899-4021 A 34899-4020 34899-4016 G F 34899-4015 E 34899-4014 D 34899-4013 34899-4012 C B 34899-4011 34899-4010 A G F E ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION 11 10 9 CONCEPT CONCEPT CONCEPT CONCEPT OBSOLETE OBSOLETE OBSOLETE CONCEPT CONCEPT CONCEPT CONCEPT CONCEPT CONCEPT CONCEPT OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE PRODUCTION TOOL STATUS 7 8 5 6 4 3 2 1 M 1x4 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 1 REFER WIRE DRESS INTERFACE SHEET FOR DETAILS L K J COMMENTS H H G F E PLR 1x4 CONNECTOR HOUSING, KEYING OPTION G 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION F 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION E 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION G 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION F 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION E 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION G 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION F 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION G 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION F 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT 1x4 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT NATURAL LIGHT GRAY BLACK DARK GRAY LIGHT GRAY DARK GRAY STONE GRAY BLACK YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW LIGHT GRAY BLACK DARK GRAY LIGHT GRAY DARK GRAY STONE GRAY BLACK YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C D CONNECTOR HOUSING KEYING OPTION D E CONNECTOR HOUSING KEYING OPTION E F CONNECTOR HOUSING KEYING OPTION F G CONNECTOR HOUSING KEYING OPTION G PLR PLR C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 mm 2:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 SCALE CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DIMENSION UNITS 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 8 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M L K J KEYING OPTION A, 40G CLIP SLOT, BLACK 34899-4060 KEYING OPTION A, 40G CLIP SLOT, YELLOW 34899-4050 KEYING OPTION G, 7mm CLIP SLOT, LIGHT GRAY 34899-4086 KEYING OPTION F, 7mm CLIP SLOT, BLACK 34899-4085 KEYING OPTION E, 7mm CLIP SLOT, DARK GRAY 34899-4084 KEYING OPTION D, 7mm CLIP SLOT, LIGHT GRAY 34899-4083 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-4082 KEYING OPTION B, 7mm CLIP SLOT, STONE GRAY 34899-4081 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-4080 KEYING OPTION G, 7mm CLIP SLOT, YELLOW 34899-4076 KEYING OPTION F, 7mm CLIP SLOT, YELLOW 34899-4075 KEYING OPTION E, 7mm CLIP SLOT, YELLOW 34899-4074 KEYING OPTION D, 7mm CLIP SLOT, YELLOW 34899-4073 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-4072 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-4071 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-4070 A A TOOLED BUT NOT VALIDATED TOOLED BUT NOT VALIDATED SALEABLE G SALEABLE F SALEABLE E L SALEABLE D SALEABLE C SALEABLE B K SALEABLE A SALEABLE G SALEABLE F SALEABLE E SALEABLE D SALEABLE C SALEABLE B J SALEABLE A ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION 1x4 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 2 REFER WIRE DRESS INTERFACE SHEET FOR DETAILS PRODUCTION TOOL STATUS COMMENTS H H G F E PLR NATURAL SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT BLACK SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION G 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION F 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION G 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION F 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION E 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x4 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C D CONNECTOR HOUSING KEYING OPTION D E CONNECTOR HOUSING KEYING OPTION E F CONNECTOR HOUSING KEYING OPTION F G CONNECTOR HOUSING KEYING OPTION G PLR PLR C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 mm 1:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 SCALE CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DIMENSION UNITS 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 9 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 M L K J KEYING OPTION A, 40-G CLIP SLOT, BLACK 34899-6070 KEYING OPTION A, 40-G CLIP SLOT, YELLOW 34899-6050 KEYING OPTION D, 11mm CLIP SLOT, STONE GRAY 34899-6063 KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY 34899-6062 KEYING OPTION B, 11mm CLIP SLOT, LIGHT GRAY 34899-6061 KEYING OPTION A, 11mm CLIP SLOT, BLACK 34899-6060 KEYING OPTION D, 11mm CLIP SLOT, YELLOW 34899-6043 KEYING OPTION C, 11mm CLIP SLOT, YELLOW 34899-6042 KEYING OPTION B, 11mm CLIP SLOT, YELLOW 34899-6041 KEYING OPTION A, 11mm CLIP SLOT, YELLOW 34899-6040 KEYING OPTION D, 7mm CLIP SLOT, STONE GRAY 34899-6023 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-6022 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-6021 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-6020 KEYING OPTION D, 7mm CLIP SLOT, YELLOW 34899-6013 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-6012 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-6011 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-6010 OBSOLETE D OBSOLETE C OBSOLETE B OBSOLETE A 3 2 1 M L SALEABLE D SALEABLE C OBSOLETE B SALEABLE A K OBSOLETE D OBSOLETE C OBSOLETE B OBSOLETE A SALEABLE D SALEABLE C OBSOLETE B J SALEABLE A ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION CONCEPT A 4 1x6 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 1 REFER WIRE DRESS INTERFACE SHEET FOR DETAILS CONCEPT A 5 6 PRODUCTION TOOL STATUS H G F E COMMENTS PLR NATURAL SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT BLACK SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 40G CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT BLACK SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL H G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C D CONNECTOR HOUSING KEYING OPTION D PLR PLR C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 10 OF 11 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M L K J KEYING OPTION D, 11mm CLIP SLOT, STONE GRAY 34899-6123 KEYING OPTION C, 11mm CLIP SLOT, DARK GRAY 34899-6122 KEYING OPTION B, 11mm CLIP SLOT, LIGHT GRAY 34899-6121 KEYING OPTION A, 11mm CLIP SLOT, BLACK 34899-6120 KEYING OPTION D, 11mm CLIP SLOT, YELLOW 34899-6113 KEYING OPTION C, 11mm CLIP SLOT, YELLOW 34899-6112 KEYING OPTION B, 11mm CLIP SLOT, YELLOW 34899-6111 KEYING OPTION A, 11mm CLIP SLOT, YELLOW 34899-6110 KEYING OPTION D, 7mm CLIP SLOT, STONE GRAY 34899-6093 KEYING OPTION C, 7mm CLIP SLOT, DARK GRAY 34899-6092 KEYING OPTION B, 7mm CLIP SLOT, LIGHT GRAY 34899-6091 KEYING OPTION A, 7mm CLIP SLOT, BLACK 34899-6090 KEYING OPTION D, 7mm CLIP SLOT, YELLOW 34899-6083 KEYING OPTION C, 7mm CLIP SLOT, YELLOW 34899-6082 KEYING OPTION B, 7mm CLIP SLOT, YELLOW 34899-6081 KEYING OPTION A, 7mm CLIP SLOT, YELLOW 34899-6080 D C SALEABLE SALEABLE SALEABLE B SALEABLE A SALEABLE D L SALEABLE C SALEABLE B SALEABLE A K SALEABLE D SALEABLE C SALEABLE B SALEABLE A SALEABLE D SALEABLE C SALEABLE B J SALEABLE A ASSEMBLY PART NUMBER ASSEMBLY DESCRIPTION 1x6 BLADE SEALED ASSEMBLY BOM FOR WIRE DRESS COVER INTERFACE 2 REFER WIRE DRESS INTERFACE SHEET FOR DETAILS PRODUCTION TOOL STATUS COMMENTS H H G F E PLR NATURAL SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT BLACK SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 11mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT STONE GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT DARK GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT LIGHT GRAY SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT BLACK SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION D 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION C 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION B 7mm CLIP SLOT YELLOW SPS/NYLON GF20 1x6 CONNECTOR HOUSING, KEYING OPTION A 7mm CLIP SLOT YELLOW SPS/NYLON GF20 DESCRIPTION COLOR MATERIAL G F E BOM/APPLICABLE COMPONENTS TABLE D D LEGEND TABLE ABREVIATION COMPONENT A CONNECTOR HOUSING KEYING OPTION A B CONNECTOR HOUSING KEYING OPTION B C CONNECTOR HOUSING KEYING OPTION C D CONNECTOR HOUSING KEYING OPTION D PLR PLR C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/11/30 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:09:22 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 1.2MM 1X4, 1X6 BLADE SEALED ASSEMBLY CABLE SEAL 639764 REMOVED CPA3 AND REPLACED WITH CPA2 AGAIN 2020/10/19 64 B 2020/11/30 PRODUCT CUSTOMER DRAWING 2020/11/30 EC NO: 649191 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MVANSLAMBROU APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING D-SIZE 6 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5 2012/07/13 2012/07/24 SERIES 34899 SD-34899-6001 MATERIAL NUMBER GENERAL MARKET 3 C SHEET NUMBER CUSTOMER SEE TABLE 4 PSD 001 2 11 OF 11 1 A 19 L K 18 17 16 TABLE OF CONTENTS SHEET NO. SHEET DESCRIPTION 1 NOTES 2 1x4 RECEPTACLE SEALED ASSEMBLY KEYING CONFIGURATIONS 3 1x6 RECEPTACLE SEALED ASSEMBLY KEYING CONFIGURATIONS 4 RECEPTACLE SEALED ASSEMBLY 5 1x4 RECEPTACLE SEALED ASSEMBLY BOM SHEET 6 1x6 RECEPTACLE SEALED ASSEMBLY BOM SHEET J 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 L NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34900-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. b. PRODUCT SPECIFICATION SEE: PS-34900-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, APPROVED TERMINALS, SINGLE WIRE SEALS, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31301-898 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) f. DESIGNED TO MATE WITH DEVICE CONNECTION AS SPECIFIED IN BOM CHART USCAR INTERFACE DRAWINGS AND MODELS ARE AVAILIBLE AT http://ewcap.uscarteams.org/. CPA CONNECTOR HOUSING K J 2. DESIGN - MATERIALS: a. SEE BOM TABLE H RING SEAL H 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) CAD MODEL. g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR TERMINAL HOUSING INDEPENDENT SECONDARY LOCK (I.S.L) G F G E D C MID LENGTH SHROUD 1x6 RECEPTACLE SEALED ASSEMBLY LONG SHROUD MID LENGTH SHROUD A RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 2020/06/23 17 16:54:53 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 = 0 DRWN BY ° ANGULAR TOL ± A17 REV LONG SHROUD 1x6 RECEPTACLE SEALED ASSEMBLY 2020/06/17 2020/06/23 2020/06/23 1x4 RECEPTACLE SEALED ASSEMBLY 639764 GELLIOTT01 KBORUSZEWSKI KBORUSZEWSKI 1x4 RECEPTACLE SEALED ASSEMBLY REMOVED CPA3 A14 UPDATED STATUS, ADDED WIRE DRESS COVERS A13 NX-REMASTER, ADDED CPA2 PART NUMBERS ABD OBSELETE PAGE A12 RELEASE ALL KEYS SALEABLE A11 RELEASE NON SIR SALEABLE A10 PART #'S WITH NEW LATCH DESIGN SALEABLE A9 PART #'S WITH NEW LATCH DESIGN SALEABLE A8 ADDED NEW PART NUMBERS FOR LATCH IMPROVEMENT PARTS A7 UPDATED 34900-6012 AND 34900-6012 TO SALEBLE A6 UPDATED SHROUD LENGTH DIMENSION SCHEME A5 BOM CORRECTIONS AND UPDATES A4 BOM CORRECTIONS AND UPDATES A3 NON SIR PART# OK TO TOOL A2 BOM UPDATES FOR NON-SIR PART # A1 1X6 MID LENGTH SHROUD OK TO TOOL A 1X4 INLINE VIEWS ADDED 1 INITIAL RELEASE REV DESCRIPTION F E D C QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 3:1 = 0 (UNLESS SPECIFIED) EC NO: DRWN: CHK'D: APPR: B A15-A17 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 CHK'D BY DATE APPR BY DATE DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/05/03 MVANSLAMBROU GGA B DATE 2012/12/13 THIRD ANGLE PROJECTION D 5 1.2MM 1X4, 1X6 RECPT. SEALED ASSEMBLY CABLE SEAL 626759 - CHANGED CPA2 TO CPA2. ROLLING CHANGE AT GM. PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES SEE TABLE 34900 DOCUMENT NUMBER 4 CUSTOMER SD-34900-6001 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 1 OF 7 1 A 19 18 17 16 L 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 L 1x4 RECEPTACLE SEALED ASSEMBLY KEYING CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. 4.80 3.20 K K J J KEYING OPTION A KEYING OPTION E 0.00 1.60 H H G G KEYING OPTION B KEYING OPTION F F F 1.60 3.20 E E D D KEYING OPTION C KEYING OPTION G 4.80 C C RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 2020/06/23 17 16:54:53 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 DRWN BY ° ANGULAR TOL ± A17 REV A 0 639764 GELLIOTT01 KBORUSZEWSKI KBORUSZEWSKI KEYING OPTION D = EC NO: DRWN: CHK'D: APPR: B 2020/06/17 2020/06/23 2020/06/23 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 5:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 CHK'D BY DATE APPR BY DATE DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/05/03 MVANSLAMBROU GGA B DATE 2012/12/13 THIRD ANGLE PROJECTION D 5 1.2MM 1X4, 1X6 RECPT. SEALED ASSEMBLY CABLE SEAL 626759 - CHANGED CPA2 TO CPA2. ROLLING CHANGE AT GM. PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES SEE BOM 34900 DOCUMENT NUMBER 4 CUSTOMER SD-34900-6001 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 2 OF 7 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 1x6 RECEPTACLE SEALED ASSEMBLY KEYING CONFIGURATIONS. FOR PART NUMBERS REFER TO BOM SHEET. L L 8.00 K K J J KEYING OPTION A 4.00 H H G G KEYING OPTION B F F 4.00 E E KEYING OPTION C D D 8.00 C C RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 2020/06/23 17 16:54:53 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 DRWN BY ° ANGULAR TOL ± A17 REV A 0 639764 GELLIOTT01 KBORUSZEWSKI KBORUSZEWSKI KEYING OPTION D = EC NO: DRWN: CHK'D: APPR: B 2020/06/17 2020/06/23 2020/06/23 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 5:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 CHK'D BY DATE APPR BY DATE DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/05/03 MVANSLAMBROU GGA B DATE 2012/12/13 THIRD ANGLE PROJECTION D 5 1.2MM 1X4, 1X6 RECPT. SEALED ASSEMBLY CABLE SEAL 626759 - CHANGED CPA2 TO CPA2. ROLLING CHANGE AT GM. PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES SEE BOM 34900 DOCUMENT NUMBER 4 CUSTOMER SD-34900-6001 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 3 OF 7 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 RECEPTACLE SEALED ASSEMBLY L LASER MARKING ON THIS 1 SURFACE SEE NOTE 3g 5 2 A MAX ⌀C MIN PASS-THRU WITH 31.0(++edited++) MAX B MAX L A K B2 K 3 B2 B 10.70 MAX B 4 J J 6.5 MAX 9 LONG SHROUD A D ±0.50 6 26.70 MAX H TERMINAL POSITION 1 H TERMINAL POSITION 6 G G (D) ±0.50 MID LENGTH SHROUD F F 7 1.3 ±0.5 E E D 16.5 16.5 33.0 6.70 1x4 MID LENGTH SHROUD 16.5 16.5 25.0 6.70 1x6 LONG SHROUD 16.5 16.5 33.0 2.00 1x4 LONG SHROUD 12.5 12.5 25.0 2.00 DESCRIPTION A B C D INDEPENDENT SECONDARY LOCK (ISL) D CHARTED DIMENSIONS SECTION B2-B2 SECTION B-B C 1x6 MID LENGTH SHROUD C INDEPENDENT SECONDARY LOCK (ISL) SHOWN IN THE PRE-STAGED POSITION SHOWN IN THE FINAL-LOCK POSITION RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 2020/06/23 17 16:54:53 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 DRWN BY ° ANGULAR TOL ± 639764 GELLIOTT01 KBORUSZEWSKI KBORUSZEWSKI 0 A17 REV A = EC NO: DRWN: CHK'D: APPR: B 2020/06/17 2020/06/23 2020/06/23 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 4:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 CHK'D BY DATE APPR BY DATE DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/05/03 MVANSLAMBROU GGA B DATE 2012/12/13 THIRD ANGLE PROJECTION D 5 1.2MM 1X4, 1X6 RECPT. SEALED ASSEMBLY CABLE SEAL 626759 - CHANGED CPA2 TO CPA2. ROLLING CHANGE AT GM. PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES SEE BOM 34900 DOCUMENT NUMBER 4 CUSTOMER SD-34900-6001 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 4 OF 7 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 1X4 RECEPTACLE SEALED ASSEMBLY BOM SHEET 1 L BLACK BLACK BLACK BLACK BLACK BLACK BLACK YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW KEY OPTION G KEY OPTION F KEY OPTION E KEY OPTION D KEY OPTION C KEY OPTION B KEY OPTION A KEY OPTION G KEY OPTION F KEY OPTION E KEY OPTION D KEY OPTION C KEY OPTION B KEY OPTION A KEY OPTION G KEY OPTION F KEY OPTION E KEY OPTION D KEY OPTION C KEY OPTION B KEY OPTION A KEY OPTION G KEY OPTION F KEY OPTION E KEY OPTION D KEY OPTION C KEY OPTION B KEY OPTION A KEY OPTION G KEY OPTION F KEY OPTION E KEY OPTION D KEY OPTION C KEY OPTION B KEY OPTION A K J H ASSEMBLY DESCRIPTION LIGHT GRAY BLACK DARK GRAY LIGHT GRAY DARK GRAY STONE GRAY BLACK LIGHT GRAY BLACK DARK GRAY LIGHT GRAY DARK GRAY STONE GRAY BLACK LIGHT GRAY BLACK DARK GRAY LIGHT GRAY DARK GRAY STONE GRAY BLACK LIGHT GRAY BLACK DARK GRAY LIGHT GRAY DARK GRAY STONE GRAY BLACK LIGHT GRAY BLACK DARK GRAY LIGHT GRAY DARK GRAY STONE GRAY BLACK 34900-4226 34900-4225 34900-4224 34900-4223 34900-4222 34900-4221 34900-4220 34900-4216 34900-4215 34900-4214 34900-4213 34900-4212 34900-4211 34900-4210 34900-4136 34900-4135 34900-4134 34900-4133 34900-4132 34900-4131 34900-4130 34900-4126 34900-4125 34900-4124 34900-4123 34900-4122 34900-4121 34900-4120 34900-4116 34900-4115 34900-4114 34900-4113 34900-4112 34900-4111 34900-4110 LONG LONG LONG LONG LONG LONG LONG LONG LONG LONG LONG LONG LONG LONG MID LENGTH MID LENGTH MID LENGTH MID LENGTH MID LENGTH MID LENGTH MID LENGTH LONG LONG LONG LONG LONG LONG LONG LONG LONG LONG LONG LONG LONG LONG TERMINAL CONNECTOR OUTER HOUSING HOUSING COLOR HOUSING COLOR SHROUD LENGTH CHY CHY CHY CHY CHY CHY CHY CHY CHY CHY CHY CHY CHY CHY CHB CHB CHB CHB CHB CHB CHB A A CHB CHB CHB CHB CHB CHB CHB ASSEMBLY PART NUMBER B B C C D D E E F F G G CHMB G F CHMB E CHMB D CHMB CHMB C B CHMB CHMB A G CPA1 CPA1 F CPA1 E CPA1 D CPA1 C CPA1 B CPA1 A G CPA1 CPA1 F CPA1 E CPA1 D CPA1 C CPA1 B CPA1 A A B C D E F G CPA1 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 CPA2 SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE CONCEPT CONCEPT CONCEPT CONCEPT CONCEPT CONCEPT CONCEPT SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE SALABLE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PRODUCTION TOOL STATUS CPA2 COMMENTS L 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 K J H DESIGNED TO MATE WITH DEVICE CONNECTION G G F F E LEGEND TABLE COMPONENT ABREVIATION RED PBT GF30 CPA1 RED PBT GF30 TERMINAL HOUSING KEYING OPTION G LIGHT GRAY SPS/NYLON GF20 TERMINAL HOUSING KEYING OPTION F BLACK SPS/NYLON GF20 TERMINAL HOUSING KEYING OPTION E DARK GRAY SPS/NYLON GF20 TERMINAL HOUSING KEYING OPTION D LIGHT GRAY SPS/NYLON GF20 TERMINAL HOUSING KEYING OPTION C DARK GRAY SPS/NYLON GF20 TERMINAL HOUSING KEYING OPTION B STONE GRAY SPS/NYLON GF20 TERMINAL HOUSING KEYING OPTION A BLACK SPS/NYLON GF20 MID LENGTH CONNECTOR HOUSING BLACK SPS/NYLON GF20 E BLACK SPS/NYLON GF20 UPDATED LATCH CHB CONNECTOR HOUSING BLACK CONNECTOR HOUSING YELLOW SPS/NYLON GF20 UPDATED LATCH CHBM CONNECTOR HOUSING BLACK MID SHROUD WIRE DRESS COVER STRAIGHT BLACK PA66 WIRE DRESS COVER LEFT BLACK PA66 WIRE DRESS COVER RIGHT BLACK PA66 DESCRIPTION COLOR MATERIAL TERMINAL HOUSING KEY A B TERMINAL HOUSING KEY B C TERMINAL HOUSING KEY C D TERMINAL HOUSING KEY D E TERMINAL HOUSING KEY E F TERMINAL HOUSING KEY F G TERMINAL HOUSING KEY G CPA1 CPA VERSION 1 CPA2 CPA VERSION 2 RELEASE DATE 18 USCAR INTERFACE 120-S-004-1-Z02 SEE NOTE 1f FOR WEBSITE MOLEX INLINE BLADE CONNECTOR SD-34899-6001 C 16 C QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 5:1 = 0 (UNLESS SPECIFIED) RING SEAL 16:54:53 COMMENTS BOM/APPLICABLE COMPONENTS TABLE ISL 2020/06/23 17 D SOLD SEPARATELY SEE SD-160091-0001 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 = 0 DRWN BY ° ANGULAR TOL ± A17 REV A 2 P1 CPA2 CONNECTOR HOUSING 1 RELEASE STATUS 19 SPS/NYLON GF20 CONNECTOR HOUSING YELLOW RING SEAL FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 NATURAL CHY ISL A ISL 2020/06/17 2020/06/23 2020/06/23 B INHERENTLY LUBRICATED SILICONE 639764 GELLIOTT01 KBORUSZEWSKI KBORUSZEWSKI C LIGHT BLUE EC NO: DRWN: CHK'D: APPR: D RING SEAL 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 CHK'D BY DATE APPR BY DATE DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/05/03 MVANSLAMBROU GGA B DATE 2012/12/13 THIRD ANGLE PROJECTION D 5 1.2MM 1X4, 1X6 RECPT. SEALED ASSEMBLY CABLE SEAL 626759 - CHANGED CPA2 TO CPA2. ROLLING CHANGE AT GM. PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES SEE BOM 34900 DOCUMENT NUMBER 4 CUSTOMER SD-34900-6001 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 5 OF 7 1 A 19 18 17 16 L K J H 15 14 13 12 11 10 KEYING OPTION D BLACK STONE GRAY MID LENGTH 34900-6230 CHMB KEYING OPTION C BLACK DARK GRAY MID LENGTH 34900-6221 CHMB KEYING OPTION B BLACK LIGHT GRAY MID LENGTH 34900-6228 CHMB KEYING OPTION A BLACK BLACK MID LENGTH 34900-6219 CHMB A KEYING OPTION D BLACK STONE GARY LONG 34900-6243 CHLB KEYING OPTION C BLACK DARK GRAY LONG 34900-6242 CHLB KEYING OPTION B BLACK LIGHT GRAY LONG 34900-6241 CHLB KEYING OPTION A BLACK BLACK LONG 34900-6240 CHLB KEYING OPTION D YELLOW STONE GRAY LONG 34900-6213 CHLY KEYING OPTION C YELLOW DARK GRAY LONG 34900-6212 CHLY KEYING OPTION B YELLOW LIGHT GRAY LONG 34900-6211 CHLY KEYING OPTION A YELLOW BLACK LONG 34900-6210 CHLY KEYING OPTION D BLACK STONE GRAY MID LENGTH 34900-6130 CHMB KEYING OPTION C BLACK DARK GRAY MID LENGTH 34900-6121 CHMB KEYING OPTION B BLACK LIGHT GRAY MID LENGTH 34900-6128 CHMB KEYING OPTION A BLACK BLACK MID LENGTH 34900-6119 CHMB A KEYING OPTION D BLACK STONE GARY LONG 34900-6143 CHLB KEYING OPTION C BLACK DARK GRAY LONG 34900-6142 CHLB KEYING OPTION B BLACK LIGHT GRAY LONG 34900-6141 CHLB KEYING OPTION A BLACK BLACK LONG 34900-6140 CHLB KEYING OPTION D YELLOW STONE GRAY LONG 34900-6113 CHLY KEYING OPTION C YELLOW DARK GRAY LONG 34900-6112 CHLY KEYING OPTION B YELLOW LIGHT GRAY LONG 34900-6111 CHLY KEYING OPTION A YELLOW BLACK LONG 34900-6110 CHLY ASSEMBLY DESCRIPTION CONNECTOR HOUSING COLOR TERMINAL CAVITY COLOR OUTER HOUSING SHROUD LENGTH G 9 SALABLE 1 3 CPA2 SALABLE 1 3 CPA2 SALABLE 1 3 CPA2 SALABLE 1 3 CPA2 SALABLE 1 2 CPA2 SALABLE 1 2 CPA2 SALABLE 1 2 CPA2 SALABLE 1 2 CPA2 SALABLE 1 2 CPA2 SALABLE 1 2 CPA2 SALABLE 1 2 CPA2 SALABLE 1 2 CPA1 SALABLE 1 3 CPA1 SALABLE 1 3 CPA1 SALABLE 1 3 CPA1 SALABLE 1 3 CPA1 SALABLE 1 2 CPA1 SALABLE 1 2 CPA1 SALABLE 1 2 CPA1 SALABLE 1 2 CPA1 SALABLE 1 2 CPA1 SALABLE 1 2 CPA1 SALABLE 1 2 CPA1 SALABLE 1 2 1 2 C B D C B A D C B A C B D C B A D C B A ASSEMBLY PART NUMBER A B C D 5 6 CPA2 D D 7 8 CPA1 CPA2 STATUS COMMENTS J DESIGNED TO MATE WITH DEVICE CONNECTION G INHERENTLY LUBRICATED SILICONE BURNT RED NATURAL SPS/NYLON GF20 CPA2 RED PBT GF30 CPA1 RED PBT GF30 TERMINAL HOUSING KEYING OPTION D STONE GRAY SPS/NYLON GF20 TERMINAL HOUSING KEYING OPTION C DARK GRAY SPS/NYLON GF20 TERMINAL HOUSING KEYING OPTION B LIGHT GRAY SPS/NYLON GF20 TERMINAL HOUSING KEYING OPTION A BLACK SPS/NYLON GF20 CONNECTOR HOUSING MID LENGTH BLACK SPS/NYLON GF20 UPDATED LATCH CONNECTOR HOUSING LONG BLACK SPS/NYLON GF20 UPDATED LATCH CONNECTOR HOUSING LONG YELLOW SPS/NYLON GF20 UPDATED LATCH WIRE DRESS COVER STRAIGHT BLACK PA66 WIRE DRESS COVER LEFT BLACK PA66 COMPONENT CHLY CONNECTOR HOUSING LONG YELLOW CHLB CONNECTOR HOUSING LONG BLACK CHMB CONNECTOR HOUSING MEDIUM BLACK WIRE DRESS COVER RIGHT BLACK PA66 A TERMINAL HOUSING KEY A DESCRIPTION COLOR MATERIAL B TERMINAL HOUSING KEY B C TERMINAL HOUSING KEY C D TERMINAL HOUSING KEY D CPA1 CPA VERSION 1 CPA2 CPA VERSION 2 ISL ISL RING SEAL RING SEAL 3 RELEASE STATUS 19 P1 RELEASE DATE 18 16:54:53 C 16 COMMENTS 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 = 0 2020/06/17 2020/06/23 2020/06/23 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 2:1 = 0 (UNLESS SPECIFIED) USCAR INTERFACE 120-S-006-1-Z02 SEE NOTE 1f FOR WEBSITE MOLEX INLINE BLADE CONNECTOR SD-34899-6001 USCAR INTERFACE 120-S-006-1-Z04 SEE NOTE 1f FOR WEBSITE 2020/06/23 17 D SOLD SEPARATELY SEE SD-160091-0001 C A FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 E BOM / APPLICABLE COMPONENTS TABLE DRWN BY ° ANGULAR TOL ± A17 REV 2 F ISL ABREVIATION 1 B L 3 639764 GELLIOTT01 KBORUSZEWSKI KBORUSZEWSKI C 1 H EC NO: DRWN: CHK'D: APPR: D 2 1X6 RECEPTACLE SEALED ASSEMBLY BOM SHEET 1 F LEGEND TABLE 3 K RING SEAL E 4 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 CHK'D BY DATE APPR BY DATE DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/05/03 MVANSLAMBROU GGA B DATE 2012/12/13 THIRD ANGLE PROJECTION D 5 1.2MM 1X4, 1X6 RECPT. SEALED ASSEMBLY CABLE SEAL 626759 - CHANGED CPA2 TO CPA2. ROLLING CHANGE AT GM. PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES SEE TABLE 34900 DOCUMENT NUMBER 4 CUSTOMER SD-34900-6001 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 6 OF 7 1 A 19 18 17 16 15 14 13 12 11 10 9 8 7 5 6 4 3 2 1 OBSELETE PART NUMBERS L L K K J J 34900-4026 OBSELETE 34900-4025 OBSELETE 34900-4024 OBSELETE 34900-4023 OBSELETE 34900-4022 OBSELETE 34900-4021 OBSELETE 34900-4020 OBSELETE 34900-4016 OBSELETE 34900-4015 OBSELETE 34900-4014 OBSELETE 34900-4013 OBSELETE 34900-4012 OBSELETE 34900-4011 OBSELETE 34900-4010 ASSEMBLY PART NUMBER H G F 34900-6030 OBSELETE 34900-6021 OBSELETE 34900-6028 OBSELETE 34900-6019 OBSELETE 34900-6043 OBSELETE 34900-6042 OBSELETE 34900-6041 OBSELETE 34900-6040 OBSELETE 34900-6013 OBSELETE 34900-6012 OBSELETE 34900-6011 OBSELETE OBSELETE 34900-6010 OBSELETE STATUS ASSEMBLY PART NUMBER STATUS 1X4 H G F 1X6 E E D D C C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE DIMENSION UNITS mm 1:1 Material: Heat treat: Finish: GENERAL TOLERANCES (UNLESS SPECIFIED) CURRENT REV DESC: B ANGULAR TOL ± A DOCUMENT STATUS 19 P1 18 RELEASE DATE 17 2020/06/23 16 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 0.5 EC NO: DRWN: CHK'D: APPR: 639764 GELLIOTT01 KBORUSZEWSKI KBORUSZEWSKI 2012/05/03 MVANSLAMBROU THIRD ANGLE PROJECTION DRAWING D-SIZE 14 13 12 11 10 9 8 7 6 2020/06/17 2020/06/23 2020/06/23 ORIG DRWN BY: 16:54:53 15 1.2MM 1X4, 1X6 RECPT. SEALED ASSEMBLY CABLE SEAL 626759 - CHANGED CPA2 TO CPA2. ROLLING CHANGE AT GM. ° TOOL NUMBER FORMAT: master-tb-tool-D REVISION: H DATE: 2018/01/18 B 5 SERIES PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER SD-34900-6001 MATERIAL NUMBER 34900 4 DOC TYPE DOC PART REVISION PSD CUSTOMER GENERAL MARKET 3 2 A17 001 SHEET NUMBER 7 OF 7 1 A