0349674001

Mini50 Sealed Features Wire-to-Device Receptacle Benefits Rounded shape Allows for through hole harness r Delivering significant space savings over traditional Vertical ISL USCAR 0.64mm connectors, Mini50 Sealed Wire-toDevice Receptacles utilize smaller pins, terminals and wire gauges while providing protection from Front watercover and dust ingress Features and Advantages Individual test pin and servicing a MX64™ Sealed Single-Row Receptacle Sealed receptacle Delivers a 0.50mm connector interface tested to meet full USCAR specifications. No parting lines on sealing surfaces. IP68 rating, IP69K with backshell. Enhances design flexibility Strong secondary terminal retent Optional CPA Mating assurance feedback device that prevents accidental un-mating Reduced package sizes (USCAR) Shrink footprint 1x4 25% compared to USCAR 0.64mm unsealed interfaces. Reduces PCB footprint by 30% compared to 4-circuit connectors MX64 Sealed 1X4 Receptacle Mini50™ Sealed (USCAR) 1x4 Ke Co Approximate 25% in Mini50reduction Sealed 1X4 Receptacle size for the 4-circuit receptacle Mat seal Molex Confidential Information © 2016 Molex – All Rights Reserved. Unauthorized Reprodu 5 s Ring seal Polarization options Eliminates mating and assembly errors. Color-coded to correspond to polarity Independent secondary lock (ISL) terminal-retention feature Pre-loaded in assembly for applied cost savings Rounded shape Allows for through-hole routing Dual-Row Connectors Cavity plug available Delivers design flexibility. Enables multiple circuit counts within the same connector, simplifying inventory Cavity Plug 2-by-4 Receptacle 2-by-8 Receptacle Mini50 Sealed Wire-to-Device Receptacle Optional CPA Independent secondary lock (ISL) terminal-retention feature • Mating assurance feedback device that prevents accidental un-mating • Pre-loaded in assembly for applied cost savings Ring Seal ISL Mat Seal Connector Housing Terminal Housing Cover Reduced package sizes Dual-Row (2x4) Connector Polarization Options • Eliminates mating and assembly errors ISL • Shrink footprint 25% compared to USCAR 0.64mm unsealed interfaces • Reduces PCB footprint by 30% compared to 4-Circuit connectors • Color-coded to correspond to polarity Applications Automotive and Transportation Power Steering Cameras Sensors (parking, radar, etc). Braking Exterior Lighting Mirrors Exterior/Mirrors/Cameras Automotive Industry Lighting Mini50 Sealed Wire-to-Device Receptacle Specifications REFERENCE INFORMATION Packaging: Housings – Bulk pack Terminals – Reel and loose piece Use With Terminals: Female Series 34905 Designed in: Millimeters Dimensions: 1x2: Height 16.30; Length 14.50; Depth: 28.00mm 1x4: Height 16.60; Length 18.40; Depth 28.00mm 1x10: Height 16.60; Length 29.20; Depth 28.00mm PHYSICAL Receptacle Housings: High Temperature Thermoplastic Contact: Copper (Cu) Alloy Plating: Contact Area — Tin (Sn) or Silver (Ag) Wire Gauge: 0.13mm² to 0.35mm² Insulation Diameter: 1.40mm to 0.95mm Operating Temperature: With Tin Terminal: -40 to +105°C With Silver Terminals: -40 to +125°C ELECTRICAL Voltage (max.): 14V DC Current (max.): 4.0A Contact Resistance (max.): 20 milliohms Dielectric Withstanding Voltage (min.): 1000V AC Isolation Resistance (min.): 100 Megohms @ 500V DC ELECTRICAL / MECHANICAL Durability (max.): 20 milliohms Mating cycles (max.): 10 High-Temperature Exposure, 1008 hours (USCAR-2 , GMW3191): Post test resistance (max.) – 20 milliohms Isolation resistance (max.) – 100 Megohms @ 500V DC Temp / Humidity Cycling, 240 hours (USCAR-2 , GMW3191): Post test resistance (max.) – 20 milliohms Isolation resistance (max.) – 100 Megohms @ 500V DC Terminal Retention (min.) = 50N Thermal Shock; class 2/3 300 cycles (USCAR-2 , GMW3191): Post test resistance (max.) – 20 milliohms Isolation resistance (max.) – 100 Megohms @ 500V DC Terminal Retention (min.) = 30N Vibration / Mechanical Shock (Not Coupled to Engine): (USCAR-2, GMW3191): Post test resistance (max.) – 20 milliohms Thermal Aging at Max Temp 1008 hours @ 125oC 28kPa for 15 sec. min. Submersion for 30 minutes Isolation Resistance (min.): 100 Megohms @ 500V DC ELECTRICAL / MECHANICAL Current Capability: (USCAR-2, GMW3191): Temperature rise over ambient < 55oC Post test resistance (max.) – 20 milliohms Terminal – Connector Insertion Force (USCAR-2, GMW3191): Insertion Force (max.) = 5N Primary Retention Force (min.) = 20N Secondary Retention Force (min.) = 60N Mating Force (USCAR-2, GMW3191) (max.): 45N (1x4) 75N (1x10) Unmating Force (USCAR-2) (max.): 75N Connector Drop Test: (USCAR-2): Post test visual inspection Polarization Feature Effectiveness (USCAR-2): min = 3* mate force SEALING Sealing Class: 2 (IP68) without Backshell after 2 service cycles Ordering Information SEALED RECEPTACLES Series No. Component Rows Circuit Sizes 34967 Sealed Receptacles Single 2, 4 and 10 Series No. Plating Wire Gauge (mm2) Wound Direction / Payoff Direction 34905 Tin or Silver CTX50 SEALED TERMINALS 0.08 to 0.13 D=Left; B=Right 0.22 to 0.35 Note: Reference PS-34791-000 for all validated wire types. SERVICE TOOL FOR MINI50 SEALED Part No. Component 63824-7500 Extraction Tool for CTX50 Contacts for Mini50 Sealed Receptacle www.molex.com/link/mini50.html Molex is a registered trademark of Molex, LLC in the United States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners. Order No. 987651-6273 Rev. 3 USA/0k/GF/2020.09 ©2020 Molex