0436450208

20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 M K .455 REF 11.56 43645 .551 14.00 .200 5.09 .152 3.86 43645-0208 02 SEE DETAIL .118/(3.00) 43645-0308 03 .388/(9.85) .236/(6.00) 43645-0408 04 .506/(12.85) .354/(9.00) 43645-0508 05 .624/(15.85) .472/(12.00) 43645-0608 06 .742/(18.85) .591/(15.00) X 07 .860/(21.85) .709/(18.00) X 08 .978/(24.85) .827/(21.00) X 09 1.096/(27.85) .945/(24.00) X 10 1.215/(30.85) 1.063/(27.00) X 11 1.333/(33.85) 1.181/(30.00) X 12 1.451/(36.85) 1.299/(33.00) CIRCUIT #1 IDENTIFIER H M L K J .118 3.00 .118 3.00 TYP .075 1.92 DIM. "B" .076 1.93 A J 1 DIM. "A" .080 2.03 CIRCUIT #1 2 NUMBER OF CIRCUIT .180 4.57 43645 L .326 8.28 3 ITEM NUMBER SEE NOTE 10 5.30 4 NOT RELEASED CIRCUIT #1 IDENTIFIER .209 5 .076 1.93 A H FIRST CIRCUIT "B" IDENTIFIER RIB (ALL CIRCUIT SIZES) "A" (2 CIRCUIT HOUSING) (3-12 CIRCUIT HOUSING) G G .030 REF 0.76 RECEPTACLE #43645-**** TERMINAL STOPS TERMINAL INSERTION DEPTH F .691 (17.56) TERMINAL LOCKING TABS MUST BE FULLY SEATED TO HOUSING BEFORE MATING WITH OTHER HALF OF THE CONNECTOR SYSTEM. HEADER #43650-**** F B B E E MATED MICRO-FIT CONNECTOR TERMINAL 43030-**** NOTES: SECTION "B"-"B" SECTION "A"-"A" SHOWN WITH TERMINAL INSTALLED 1. MATERIAL: UNFILLED NYLON, UL94V-0, COLOR - BLACK (LOW HALOGEN) D D 2. FINISH : N/A 3. PRODUCT SPECIFICATION : PS-43650 4. PACKAGING SPECIFICATION: PK-43645-001 5. THIS RECEPTACLE ACCEPTS MOLEX MICRO FIT FEMALE CRIMP TERMINALS SERIES 43030 OR 46235. SEE SECTION "A"-"A" FOR TERMINAL ORIENTATION IN HOUSING. C 6. FOR OVERMOLDING PARAMETERS SEE APPLICATION SPECIFICATION 430250000-AS. SYMBOLS SEE NOTE 10 7. THIS RECEPTACLE MATES WITH MOLEX PCB HEADER 43650 SERIES AND MOLEX PLUG 43640 SERIES (WIRE TO WIRE APPLICATIONS). = 0 8. SOME HOUSINGS MAY HAVE A SMALL GATE BLEMISH NEAR THE GATE LOCATION THAT DOES NOT AFFECT FUNCTIONALITY. = 0 9. MOLEX RECOMMENDS THE USE OF MICRO-FIT TEST PLUG, SERIES 44242-**** WHENEVER CONTINUITY TESTING IS PERFORMED. TEST PLUGS MUST NOT BE USED TO MAKE OR BREAK UNDER LOAD. MOLEX DOES NOT RECOMMEND USING STANDARD MATING COMPONENTS FOR HARNESS TESTING PURPOSES. B SCALE IN/MM NTS = 0 10. THIS RIB IS DISCONTINUOUS ON CIRCUIT SIZES 7 THROUGH 12 = 0 MM ± 3 PLACES ± ± 0.25 ± 0.014 ± 0.35 ± 1 PLACE 12. TEXT ON PART IS FOR REFERENCE ONLY. TEXT AND TEXT LOCATION MAY VARY DEPENDING ON PART NUMBER AND/OR TOOL. = 0 0 PLACES ± FORMAT: Eng-lega-master-tb-prod-D REVISION: D DATE: 2018/01/18 20 19 RELEASE DATE 18 2018/06/01 17 16 C 15 14 ± ANGULAR TOL 21:26:26 13 12 11 10 9 8 = 0 0.01 2 PLACES ± = 0 P1 INCH 4 PLACES ± 11. THIS PART CONFORMS TO CLASS 'B' REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. DOCUMENT STATUS CURRENT REV DESC: UPDATE NOTE 6 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 EC NO: 168740 DRWN: AZAHIROVIC CHK'D: SSOUSEK APPR: FSMITH INITIAL REVISION: DRWN: MKIPPER APPR: FSMITH THIRD ANGLE PROJECTION 6 2018/01/03 2018/06/01 2018/06/01 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2008/01/21 2016/08/12 DRAWING SERIES D-SIZE 43645 5 MICRO-FIT (3.0) RECEPTACLE, LOW HALOGEN SINGLE ROW, 2 THRU 12 CIRCUIT SD-43645-001 MATERIAL NUMBER GENERAL MARKET 3 A5 SHEET NUMBER CUSTOMER SEE CHART 4 PSD 001 2 1 OF 1 1 A