0436450410

20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 M 5 4 TOOLED DIM. "A" YES 43645-0210 02 SEE DETAIL .118/(3.00) YES 43645-0310 03 .388/(9.85) .236/(6.00) YES 43645-0410 04 .506/(12.85) .354/(9.00) YES 43645-0510 05 .624/(15.85) .472/(12.00) YES 43645-0610 06 .742/(18.85) .591/(15.00) NO 43645-0710 07 .860/(21.85) .709/(18.00) NO 43645-0810 08 .978/(24.85) .827/(21.00) NO 43645-0910 09 1.096/(27.85) .945/(24.00) NO 43645-1010 10 1.215/(30.85) 1.063/(27.00) NO 43645-1110 11 1.333/(33.85) NO 43645-1210 12 1.451/(36.85) 1.299/(33.00) .180 4.57 43645 .455 REF 11.56 43645 L .551 14.00 K .200 5.09 .152 3.86 CIRCUIT #1 IDENTIFIER .080 2.03 CIRCUIT #1 J .076 1.93 A .118 3.00 TYP .075 1.92 H .118 3.00 1 NUMBER OF CIRCUIT SEE NOTE 9 .209 5.30 2 MATERIAL NUMBER CIRCUIT #1 IDENTIFIER .326 8.28 3 DIM. "B" M K 1.181/(30.00) J .076 1.93 A H FIRST CIRCUIT "B" IDENTIFIER RIB "A" (ALL CIRCUIT SIZES) (2 CIRCUIT HOUSING) (3-12 CIRCUIT HOUSING) G L G RECEPTACLE #43645-**** F F .691 (17.56) .030 REF 0.76 TERMINAL INSERTION DEPTH HEADER #43650-**** TERMINAL STOPS TERMINAL LOCKING TABS MUST BE FULLY SEATED TO HOUSING BEFORE MATING WITH OTHER HALF OF THE CONNECTOR SYSTEM. E E B B MATED MICRO-FIT CONNECTOR NOTES: 1. MATERIAL : UNFILLED NYLON, UL94V-2, IEC 60335-1 GLOW WIRE CAPABLE, COLOR - BLACK. TERMINAL 43030-**** * MATERIAL NUMBERS ON THIS DRAWING ARE GLOW WIRE CAPABLE SINCE INCEPTION. SECTION "A"-"A" 2. FINISH : N/A SHOWN WITH TERMINAL INSTALLED 3. PRODUCT SPECIFICATION : PS-43650 4. PACKAGING SPECIFICATION: PK-43645-001. 5. THIS RECEPTACLE TO BE USED WITH MOLEX FEMALE TERMINAL SERIES 43030 OR 46235. SEE SECTION "A"-"A" FOR TERMINAL ORIENTATION IN HOUSING. 6. FOR OVERMOLDING PARAMETERS SEE APPLICATION SPECIFICATON 430250000-AS. 7. THIS RECEPTACLE MATES WITH MOLEX PCB HEADER 43650 SERIES AND SYMBOLS MOLEX PLUG 43640 SERIES (WIRE TO WIRE APPLICATIONS). 8. MOLEX RECOMMENDS THE USE OF MICRO-FIT TEST PLUG, SERIES 44242-**** WHENEVER CONTINUITY TESTING IS PERFORMED. = 0 TEST PLUGS MUST NOT BE USED TO MAKE OR BREAK UNDER LOAD. MOLEX DOES NOT RECOMMEND USING = 0 STANDARD MATING COMPONENTS FOR HARNESS TESTING PURPOSES. SEE NOTE 9 9. THIS RIB IS DISCONTINUOUS ON CIRCUIT SIZES 7 THROUGH 12 = 0 10. THIS PART CONFORMS TO CLASS 'B' REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002, WITH THE = 0 EXCEPTION OF FLASH, DISCOLORATION, AND SINK MEET CLASS "C" REQUIREMENTS. D C B A 20 SCALE IN/MM NTS MM ± 3 PLACES ± ± 1 PLACE 12. TEXT ON PART IS FOR REFERENCE ONLY. TEXT AND TEXT LOCATION MAY VARY DEPENDING ON PART NUMBER AND/OR TOOL. = 0 0 PLACES ± 19 RELEASE DATE 18 2018/06/01 17 16 C 15 14 13 12 11 10 9 8 = 0 0.01 2 PLACES ± 0.25 ± 0.014 ± 0.35 ± ± ANGULAR TOL 21:26:27 INCH 4 PLACES ± = 0 P1 CURRENT REV DESC: UPDATE NOTE 6 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS 11. HOUSINGS MAY HAVE DISCOLORATION AREAS THAT DO NOT AFFECT FUNCTIONALITY. DISCOLORATION AREAS MAY EXTEND ACROSS THE ENTIRE LENGTH OF THE FACES OF THE PART. DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: D DATE: 2018/01/18 SECTION "B"-"B" ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 EC NO: 168740 DRWN: AZAHIROVIC CHK'D: SSOUSEK APPR: FSMITH INITIAL REVISION: DRWN: JDFOX APPR: FSMITH THIRD ANGLE PROJECTION 6 2018/01/03 2018/06/01 2018/06/01 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/02/09 2016/08/12 DRAWING SERIES D-SIZE 43645 5 MICRO-FIT (3.0) RECEPTACLE, GLOW WIRE SINGLE ROW, 2 THRU 12 CIRCUIT SD-43645-002 MATERIAL NUMBER GENERAL MARKET 3 A3 SHEET NUMBER CUSTOMER SEE CHART 4 PSD 001 2 1 OF 1 1 A