0440500006

10 9 7 8 5 6 4 3 2 1 15.24 20.57 11.94 F F 12.83 3.05 (6) PLACES 3.48 (2) PLACES E E 0.38 (2) PLACES 0.51 TYP 0.30 TYP 6.35 CIRCUIT #1 10.54 8.89 CUTAWAY PC BOARD CIRCUIT 1 CLASS C SURFACE SEE NOTE 7 ⌀3.25 ±0.08 (2) PLACES 16.00 D D 1.27 ±0.05 TYP 13.60 0.38 TOP OF PCB TO BOTTOM OF OPENING 8.89 ±0.05 11.43 ±0.10 RECOMMENDED PANEL OPENING C C 3.25 TOLERANCE 1.27 TYP NON-ACCUMULATIVE B A 1.80 6.35 ±0.08 8.89 NOTES: 1) MATERIAL: HOUSING: NYLON(PA), GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE 2) FINISH: TERMINALS: SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. 3) PRODUCT SPECIFICATION AND PROCESSING PARAMETERS: PS-44050-003. 4) PACKAGING SPECIFICATION: CONNECTOR ASSEMBLIES IN THERMOFORMED TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44050-004. 5) MATES WITH: MODULAR PLUGS THAT CONFORM TO FCC REGULATION PART 68.5. 6) TERMINAL LENGTHS MAY BE DIFFERENT FROM TERMINAL TO TERMINAL. 7) THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED, WHICH IS A CLASS C SURFACE. DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/06/29 ⌀0.89 ±0.08 TYP 8.89 ±0.08 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATED TO NX = 0 = 0 = 0 mm 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 14:36:38 8 7 B PCB LAYOUT: COMPONENT SIDE RECOMMENDED PCB THICKNESS: 1.57 SNAP-FIT PEG SCALE: NTS 6 5 4 CATEGORY 5 MODULAR JACK ASSEMBLIES, SINGLE PORT EC NO: 709829 DRWN: CCV CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: KMARANTO APPR: MMAYO THIRD ANGLE PROJECTION 2018/02/27 2022/06/29 2022/06/29 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 0097/12/11 0099/04/16 DRAWING SERIES A3-SIZE 44050 3 SD-44050-002 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET E5 SHEET NUMBER 1 OF 2 1 A 10 9 7 8 15.80 F 5 6 4 3 2 1 2.04 RECOMMENDED POINT OF CONTACT WITH REAR OF CUSTOMER PANEL 11.94 OPTIONAL PANEL GROUND TABS SEE NOTE #6 F PANEL GROUND TABS DIM "A" ±0.08 FRONT TAB OPTION 3.05 (2) PLACES 13.06 DIM "B" ±0.08 REAR TAB OPTION 3.48 (6) PLACES 2.12 ±0.08 (2) PLACES E CIRCUIT 1 E 1.27 ±0.05 TYP CLASS C SURFACE SEE NOTE 8. ISOMETRIC VIEW (NOT TO SCALE) 3.25 CUT AWAY CIRCUIT #1 FRONT PCB GROUND TAB OPTION REAR PCB GROUND TAB OPTION 1.80 8.89 ±0.05 11.43 ±0.10 DIM "A" OPTIONAL PANEL GROUND TABS SEE NOTE #6 D DIM "B" 10.72 D SNAP-FIT PEG SCALE: NTS TOLERANCE 1.27 TYP NON-ACCUMUATIVE ⌀0.89 ±0.08 TYP 6.35 ±0.08 ⌀1.57 ±0.08 (2) PLACES 8.89 ±0.08 ⌀3.25 ±0.08 (2) PLACES NOTES: 1) MATERIAL: HOUSING: NYLON(PA), GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE SHIELD: BRASS 2) FINISH: TERMINALS: SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. SHIELD: 2.54 MICROMETERS NICKEL OVER 1.27 MICROMETERS COPPER UNDERPLATE, PCB GROUND TABS DIPPED IN TIN 3) PRODUCT SPECIFICATION AND PROCESSING PARAMETERS: PS-44050-003. 4) PACKAGING SPECIFICATION: CONNECTOR ASSEMBLIES IN THERMOFORMED TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44050-004. 5) MATES WITH: MODULAR PLUGS THAT CONFORM TO FCC REGULATION PART 68.5. 6) AVAILABLE WITH THE (2) SPECIFIED PANEL GROUND TABS OMITTED FOR SIDE TO SIDE STACKABILITY, PER THE ASSEMBLY MATERIAL NUMBER TABLE. 7) TERMINAL LENGTHS MAY BE DIFFERENT FROM TERMINAL TO TERMINAL. 8) THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED, WHICH IS A CLASS C SURFACE. 8.89 13.89 C 0.38 16.51 RECOMMENDED PANEL OPENING (SHIELDED VERSIONS) TOP OF PCB TO BOTTOM OF OPENING 6.35 8.89 21.06 B "X"=NOT TOOLED A ASSEMBLY MATERIAL NUM DIM "A" DIM -B- PANEL GROUND TAB OPTION 440500007 3.05 N/A ALL 440500002 3.68 N/A ALL 440500006 4.57 N/A ALL = 0 N/A 3.05 ALL = 0 X 440500009 3.05 N/A SEE NOTE #6 = 0 X 440500004 3.68 N/A X 440500008 4.57 X 440500005 N/A DOCUMENT STATUS P1 RELEASE DATE 9 2022/06/29 B mm 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± SEE NOTE #6 DIVISIONAL 3 PLACES SYMBOLS ± N/A SEE NOTE #6 2 PLACES ± 3.05 SEE NOTE #6 1 PLACE ± 0 PLACES ± 0.5 ° 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 14:36:38 8 C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATED TO NX 440500003 FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 PCB LAYOUT: COMPONENT SIDE RECOMMENDED PCB THICKNESS: 1.57 7 6 5 4 CATEGORY 5 MODULAR JACK ASSEMBLIES, SINGLE PORT EC NO: 709829 DRWN: CCV CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: KMARANTO APPR: MMAYO THIRD ANGLE PROJECTION 2018/02/27 2022/06/29 2022/06/29 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 0097/12/11 0099/04/16 DRAWING SERIES A3-SIZE 44050 3 SD-44050-002 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET E5 SHEET NUMBER 2 OF 2 1 A