0441500022

9 7 8 E 5 6 4 DIM A 2 1 E 20.57 13.97 TYP 11.94 TYP 3 12.83 3.61 (2) PLACES PER PORT 3.18 (6) PLACES PER PORT D 10.54 6.35 TYP CLASS C SURACE SEE NOTE 9 8.89 TYP DIM D D 3.25 2.79 1.80 CIRCUIT #1 1.27 TYP 8 PORT HOUSING ONLY RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2017/02/06 9 P1 RELEASE DATE 10.11.2017 8 14:43:28 7 6 = 0 = 0 = 0 = = C 0 0 = 0 = 0 5 2017/10/23 2017/11/10 2017/11/10 0 MIGRATED & REDRAWN = 25.40 25.40 53.34 53.34 81.28 81.28 109.22 109.22 B TOLERANCES (UNLESS SPECIFIED) mm 2:1 DRWN BY DATE ANGULAR TOL ± 0.5 ° 2017/04/25 AFENG02 ± 4 PLACES E 3 PLACES ± 2 PLACES ± 0.25 LKATARZIENE APPR BY CATEGORY 5 MODULAR JACK ASSEMBLIES, GANGED DATE CHK'D BY 167139 AFENG02 AFENG02 KLANG A DIM D QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL EC NO: DRWN: CHK'D: APPR: NOTES: 1) MATERIAL: HOUSING: NYLON, GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE 2) FINISH: TERMINALS: SELECT GOLD IN CONTACT AREA: 50 MICROINCHES / 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 100 MICROINCHES / 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 50 MICROINCHES / 1.27 MICROMETERS MIN. 3) PRODUCT SPECIFICATION: PS-44050-003. 4) PACKAGING SPECIFICATION: UNSIELDED CONNECTOR ASSEMBLIES IN THERMOFORMED TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44150-005. 5) MATES WITH: MODULAR PLUGS THAT CONFORM TO FCC REGULATION PART 68.5. 6) PC BOARD LAYOUTS AND PANEL CUT-OUT SHOWN ON PAGE (3) OF (3). 7) CONNECTOR AVAILABLE WITH EITHER PEG OPTION "A" (SNAP-FIT) OR PEG OPTION "B" (PRESS-FIT). THIS DRAWING SHOWS PEG OPTION "A". 8) TERMINAL LENGTHS MAY BE DIFFERENT FROM TERMINAL TO TERMINAL. 9) THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED WHICH IS A CLASS C SURFACE. C "X"=NOT ASSEMBLY NUMBER OF PEG CENTER DIM A TOOLED MATERIAL NUMBER PORTS OPTION PEG A 441500001 2 30.48 NO B 441500017 2 30.48 NO x 4 A 441500002 58.42 NO x 4 B 441500018 58.42 NO x A 441500003 6 86.36 NO x B 441500019 6 86.36 NO x A 441500004 8 114.30 YES x B 441500020 8 114.30 YES REV 8.89 TYP B PEG OPTION "B" PRESS-FIT PEG SEE NOTE #7 (SCALE NTS) PEG OPTION "A" SNAP-FIT PEG SEE NOTE #7 (SCALE NTS) C 2017/04/26 A DATE PRODUCT CUSTOMER DRAWING ± 1 PLACE ± 0 PLACES KLANG DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 2017/04/26 THIRD ANGLE PROJECTION A3 MATERIAL NUMBER SERIES 44150 SEE CHART DOCUMENT NUMBER GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER SD-44150-002 3 CUSTOMER 2 PSD 1 OF 3 001 1 9 7 8 5 6 4 3 2 1 21.02 13.97 TYP 11.94 TYP 4.55TYP REF HIGHEST POINT SEE NOTE 12 3.61 (2) PLACES PER PORT E 14.63 ±0.64 13.31 TYP E 3.18 (6) PLACES PER PORT 10.74 REAR SHIELD CENTER GROUND TAB SEE NOTES 8 AND 9 SEE NOTE 13 DIM C DIM A 6.35 TYP 8.89 TYP DIM D D SEE NOTE 12 SEE NOTE 12 SEE NOTE 14 RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2017/02/06 9 P1 RELEASE DATE 10.11.2017 8 31.12 31.12 31.12 31.12 31.12 59.05 59.05 59.05 59.05 59.05 59.05 59.05 59.05 59.05 59.05 87.00 87.00 87.00 87.00 114.94 114.94 114.94 114.94 114.94 114.94 114.94 114.94 114.94 3.68 4.57 4.57 3.68 4.57 3.68 3.68 4.57 3.68 4.57 3.68 4.57 3.68 4.57 N/A 3.68 4.57 3.68 4.57 3.68 4.57 3.68 3.68 4.57 3.68 4.57 3.68 4.57 25.40 25.40 25.40 25.40 25.40 53.34 53.34 53.34 53.34 53.34 53.34 53.34 53.34 53.34 53.34 81.28 81.28 81.28 81.28 109.22 109.22 109.22 109.22 109.22 109.22 109.22 109.22 109.22 D 3.25 1.80 PEG OPTION "A" SNAP-FIT PEG SEE NOTE #7 (SCALE NTS) C 2.79 PEG OPTION "B" PRESS-FIT PEG SEE NOTE #7 (SCALE NTS) B "X" = NOT TOOLED = 0 = 0 = 0 = 14:43:28 6 0 = = C 7 DIM A DIM C DIM D QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL 0 0 = 0 = 0 5 TOLERANCES (UNLESS SPECIFIED) mm 2:1 DRWN BY DATE ANGULAR TOL ± 0.5 ° 2017/04/25 AFENG02 ± 4 PLACES E 3 PLACES ± 2 PLACES ± 0.25 LKATARZIENE APPR BY CATEGORY 5 MODULAR JACK ASSEMBLIES, GANGED DATE CHK'D BY REV A SEE NOTE 13 2017/10/23 2017/11/10 2017/11/10 B NOTES: 1) MATERIAL: HOUSING: NYLON, GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE SHIELD: BRASS 2) FINISH: TERMINALS: SELECT GOLD IN CONTACT AREA: 50 MICROINCHES / 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 100 MICROINCHES / 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 50 MICROINCHES / 1.27 MICROMETERS MIN. SHIELD: 100 MICROINCHES / 2.54 MICROMETERS NICKEL OVER 50 MICROINCHES / 1.27 MICROMETERS COPPER UNDERPLATE; PCB GROUND TABS DIPPED IN TIN 3) PRODUCT SPECIFICATION: PS-44050-003. 4) PACKAGING SPECIFICATION: SHIELDED CONNECTOR ASSEMBLIES IN THERMOFORMED TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44150-004. 5) MATES WITH: MODULAR PLUGS THAT CONFORM TO FCC REGULATION PART 68.5. 6) PC BOARD LAYOUTS AND PANEL CUT-OUT SHOWN ON PAGE (3) OF (3). 7) CONNECTOR AVAILABLE WITH EITHER PEG OPTION "A" (SNAP-FIT) OR PEG OPTION "B" (PRESS-FIT). THIS DRAWING SHOWS PEG OPTION "A". 8) (4) PORT AND (8) PORT MODJACKS AVAILABLE WITH A SINGLE GROUND TAB ON REAR OF SHIELD, LOCATED IN THE CENTER. PER THE ASSEMBLY MATERIAL NUMBER TABLE. 9) (8) PORT VERSION AVAILABLE WITH (3) GROUND TABS ON REAR OF SHIELD, CENTERED ON THE PART, PER THE ASSEMBLY MATERIAL NUMBER TABLE. 10) TERMINAL LENGTHS MAY BE DIFFERENT FROM TERMINAL TO TERMINAL. 11) THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED WHICH IS A CLASS C SURFACE. 12) 441500036 DOES NOT HAVE TOP, SIDE, OR BOTTOM GROUND TABS & HAS SHORTER BOTTOM FLANGES 13) 441500034 DOES NOT HAVE SIDE GROUND TABS 14) 441500037 DOES NOT HAVE BOTTOM GROUND TABS MIGRATED & REDRAWN C 8 PORT HOUSING ONLY 167139 AFENG02 AFENG02 KLANG 1.27 TYP NUMBER ASSEMBLY PEG CENTER REAR SHIELD MATERIAL NUMBER OF PORTS OPTION PEG GROUND TABS A 441500005 2 1 NO A 441500011 2 1 NO A 441500036 2 0 NO B 441500021 2 1 NO X B 441500027 2 1 NO X 4 A 441500009 1 NO 4 A 441500037 0 NO X 4 A 441500015 1 NO 4 A 441500006 3 NO 4 A 441500012 3 NO X 4 B 441500025 1 NO X 4 B 441500031 1 NO 4 B 441500022 3 NO X 4 B 441500028 3 NO X 4 B 441500034 3 NO X A 5 441500007 6 NO A 5 441500013 6 NO X B 5 441500023 6 NO B 5 441500029 6 NO X A 441500010 8 1 YES X A 441500016 8 1 YES X A 441500033 8 3 YES A 7 441500008 8 YES X A 7 441500014 8 YES X B 441500026 8 1 YES X B 441500032 8 1 YES X B 7 441500024 8 YES X B 7 441500030 8 YES EC NO: DRWN: CHK'D: APPR: CIRCUIT #1 8.89 TYP CLASS C SURFACE SEE NOTE 11 10.22 TYP 2017/04/26 A DATE PRODUCT CUSTOMER DRAWING ± 1 PLACE ± 0 PLACES KLANG DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 2017/04/26 THIRD ANGLE PROJECTION A3 MATERIAL NUMBER SERIES 44150 SEE CHART DOCUMENT NUMBER GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER SD-44150-002 3 CUSTOMER 2 PSD 2 OF 3 001 1 9 2 E 7 8 1 3 5 4 3 2 1 8 6 4 5 6 E 107.95 ±0.10 7 93.98 ±0.10 80.01 ±0.10 TYPICAL PC TERMINAL HOLE LAYOUT DETAIL A SCALE 5:1 66.04 ±0.10 52.07 ±0.10 38.10 ±0.10 24.13 ±0.10 10.16 ±0.10 SEE NOTE 2 SEE NOTE 2 CIRCUIT 2 TYP D CIRCUIT 1 TYP 10.29 ±0.08 SEE NOTE 1 8.89 ±0.08 D ⌀ 0.89 ±0.05 TYP 6.35 ±0.08 SEE DETAIL A C 3.68 OR 4.57 SEE NOTE 1 12.70 ±0.05 SEE NOTE 1 ⌀ 1.57 ±0.05 TYP SEE NOTE 1 8 PORT ASSEMBLY ONLY ⌀ 3.25 ±0.05 TYP 54.61 REF DIM E 2X 2.72 ±0.08 SEE NOTE 1 B C 8.89 ±0.05 TYP 1.27 ±0.05 TYP 13.97 ±0.05 TYP SEE NOTE 1 PCB LAYOUT : COMPONENT SIDE RECOMMENDED PCB THICKNESS : 1.57 NUMBER OF PORTS 2 4 6 8 DIM F 0.38 TOP OF PCB TO BOTTOM OF OPENING 14.10 9 31.88 59.82 87.86 115.70 B 10.11.2017 8 0 = 0 = C 14:43:28 7 6 0 0 = 0 = 0 5 2017/10/23 2017/11/10 2017/11/10 TOLERANCES (UNLESS SPECIFIED) mm 2:1 DRWN BY DATE ANGULAR TOL ± 0.5 ° 2017/04/25 AFENG02 ± 4 PLACES E 3 PLACES ± 2 PLACES ± 0.25 LKATARZIENE APPR BY CATEGORY 5 MODULAR JACK ASSEMBLIES, GANGED DATE CHK'D BY REV RELEASE DATE = = 2. SHIELD PCB GROUND TAB HOLES SPECIFIED NOT PRESENT FOR 441500033 USAGE P1 0 MIGRATED & REDRAWN 1. DIMENSIONS REFER TO SHIELDED ASSEMBLIES ONLY = 167139 AFENG02 AFENG02 KLANG NOTES: A 0 EC NO: DRWN: CHK'D: APPR: SUGGESTED PANEL OPENING SHIELDED VERSIONS RELEASE STATUS 25.40 53.34 81.28 109.22 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL = FORMAT: master-tb-prod-A3 REVISION: G DATE: 2017/02/06 DIM E DIM F 2017/04/26 A DATE PRODUCT CUSTOMER DRAWING ± 1 PLACE ± 0 PLACES KLANG DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 2017/04/26 THIRD ANGLE PROJECTION A3 MATERIAL NUMBER SERIES 44150 SEE CHART DOCUMENT NUMBER GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER SD-44150-002 3 CUSTOMER 2 PSD 3 OF 3 001 1