0445600004

10 9 8 7 5 6 4 3 2 1 F F E E SHIELDING OPTION -ASTANDARD SHIELD (SEE CHART) ENHANCES GROUND TABS 4.54 TYP (REF) HIGHEST POINT DIM "A" 14.38 TYP D 11.94 TYP SHIELDING OPTION -BENHANCED GROUND TABS (SEE CHART) 20.78 3.30 (8) PLACES PER PORT D 9.53 12.55 ±0.64 TYP 11.23 2.70 0.64 SHIELD TAB OFFSET TYP C B A 3.81 7.75 NOTES: 1) MATERIAL: HOUSING: NYLON(PA), GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE SHIELD: BRASS, 0.18 THICK 2) FINISH: TERMINALS: SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. SHIELD: 2.54 MICROMETERS NICKEL OVER 1.27 MICROMETERS COPPER UNDERPLATE; PCB GROUND TABS DIPPED IN TIN. 3) PRODUCT SPECIFICATION: PS-44560-003. 4) PACKAGING SPECIFICATION: 2 PORT: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44560-004 4 PORT: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44560-005 5) CONFORMS TO FCC REGULATION PART 68.5 FOR MODULAR JACKS. 6) ENHANCED GROUND TABS SHIELD (OPTION -B-) IS SHOWN IN THIS DRAWING. (SEE CHART) 7) SEE SHEET (2) OF (2) FOR RECOMMENDED PANEL OPENING AND PCB LAYOUT. 8) CAT 5e PERFROMANCE IS NOT SPECIFIED FOR THIS MODULAR JACK BECAUSE OF THE EVEN TERMINAL TAILS. 9) THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED, WHICH IS A CLASS C SURFACE. 10)THIS PRODUCT IS COMPLIANT TO RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC. DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/07/12 7 C 8.89 TYP CLASS C SURFACE SEE NOTE 9 10.29 DIM "B" 12.85 1.80 SHIELDING OPTION NUMBER OF REAR GROUND TABS NUMBER OF PORTS DIM "A" DIM "B" 445600112 B 1 2 29.44 25.68 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATED TO NX = PEG DETAIL SCALE 4:1 6 B ASSEMBLY MATERIAL NUMBER 3.25 02:57:58 8 CIRCUIT #1 REAR GROUND TABS 1.27 TYP 0 = 0 = 0 mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 4 COMPACT GANGED MODJACK EVEN TAILS EC NO: 709327 DRWN: CCV CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: NNGUYEN APPR: FSMITH THIRD ANGLE PROJECTION 2018/02/15 2022/07/12 2022/07/12 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/08/14 2012/08/27 DRAWING SERIES A3-SIZE 44560 3 RSD-44560-001 MATERIAL NUMBER CUSTOMER SEE CHART 2 LUCENT PSD 001 A1 SHEET NUMBER 1 OF 2 1 A 10 9 7 8 5 6 4 3 2 1 25.68 24.48 F F 13.47 SEE NOTE 1 ⌀0.89 TYP 10.10 R1.02 MAX (2) PL 1.79 TYP SEE NOTE 1 ⌀1.57 (3) PL 8.89 REF SEE NOTE 1 1.27 TYP 54.43 53.23 E 7.75 TYP E 42.23 SEE NOTE 1 12.85 TYP 10.29 TYP SEE NOTE 1 38.85 9.62 27.85 SEE NOTE 1 ⌀0.89 TYP 24.48 20.68 ⌀3.25 (2) PL R1.02 MAX (2) PL 4.98 (2) PL D 13.47 SEE NOTE 1 3.81 (2) PL SEE NOTE 1 ⌀1.57 (4) PL SEE NOTE 1 10.10 1.79 TYP SEE NOTE 1 2.50 TYP 2 PORT ASSEMBLY PCB LAYOUT : COMPONENT SIDE RECOMMENDED PCB THICKNESS: 1.57 TOLERANCE ±0.076 UNLESS OTHERWISE SPECIFIED 8.89 REF 1.27 TYP C 7.75 TYP CIRCUIT #1 10.29 TYP 12.85 TYP SEE NOTE 1 C 9.62 DIM "D" R0.25 MAX (4) PL D 4.98 (2) PL ⌀3.25 (2) PL 49.43 3.81 (2) PL SEE NOTE 1 11.73 2.50 TYP 4 PORT ASSEMBLY PCB LAYOUT : COMPONENT SIDE RECOMMENDED PCB THICKNESS: 1.57 TOLERANCE ± 0.076 UNLESS OTHERWISE SPECIFIED 1.93 TOP OF PCB TO BOTTOM OF OPENING B DIM "D" 2 4 30.20 58.95 DOCUMENT STATUS P1 RELEASE DATE 9 2022/07/12 4 2 6 8 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATED TO NX = 1 3 5 7 TYPICAL PC TERMINAL HOLE LAYOUT SCALE 5:1 RECOMMENDED PANEL OPENING SHIELDING OPTIONS A AND B FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 NOTES: 1. DIMENSIONS REFER TO ASSEMBLIES WITH SHIELDING OPTION NUMBER OF PORTS A B = 0 = 0 mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 02:57:58 8 0 7 6 5 4 COMPACT GANGED MODJACK EVEN TAILS EC NO: 709327 DRWN: CCV CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: NNGUYEN APPR: FSMITH THIRD ANGLE PROJECTION 2018/02/15 2022/07/12 2022/07/12 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/08/14 2012/08/27 DRAWING SERIES A3-SIZE 44560 3 RSD-44560-001 MATERIAL NUMBER CUSTOMER SEE CHART 2 LUCENT PSD 001 A1 SHEET NUMBER 2 OF 2 1 A 10 9 8 7 5 6 4 3 2 1 F F 1.80 3.25 E E PEG DETAIL SCALE 4:1 DIM "A" D D 14.38 TYP 11.94 TYP 20.20 3.30 (2) PLACES PER PORT C 2.62 (6) PLACES PER PORT 9.19 10.77 2.46 0.30 TYP 5.03 1.27 TYP A DIM "B" 10.29 NOTES: 1. MATERIAL: HOUSING: NYLON(PA), GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE 2. FINISH: TERMINALS: SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. 3. PRODUCT SPECIFICATION AND PROCESSING PARAMETERS: PS-44560-003. 4. PACKAGING SPECIFICATION: 2 PORT: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44560-004 4 PORT: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44560-005 5. CONFORMS TO FCC REGULATION PART 68.5 FOR MODULAR JACKS. 6. SEE SHEET (4) OF (4) FOR RECOMMENDED PANEL OPENING AND PCB LAYOUT. 7. TERMINAL LENGTHS MAY BE DIFFERENT FROM TERMINAL TO TERMINAL. 8. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED, WHICH IS A CLASS C SURFACE. 9. THIS PRODUCT IS COMPLIANT TO RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC. DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/07/12 = 0 NUMBER OF PORTS DIM "A" DIM "B" 445600001 445600003 2 4 28.96 57.71 25.68 54.43 B = 0 = 0 mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 ASSEMBLY MATERIAL NUMBER FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATED TO NX 02:57:59 8 CIRCUIT #1 8.89 TYP CLASS C SURFACE SEE NOTE 8 7.75 B C 0.51 TYP 6 5 4 COMPACT GANGED CATEGORY 5E MODJACK EC NO: 709327 DRWN: CCV CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: MKAMAR APPR: MKAMAR THIRD ANGLE PROJECTION 2018/02/10 2022/07/12 2022/07/12 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 0001/03/28 0001/03/28 DRAWING SERIES A3-SIZE 44560 3 SD-44560-001 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET G6 SHEET NUMBER 1 OF 4 1 A 10 9 8 7 5 6 4 3 2 1 F F E E SHIELDING OPTION -ASTANDARD SHIELD (SEE CHART) ENHANCED GROUND TABS DIM "A" 20.78 14.38 TYP 11.94 TYP 4.54 TYP REF HIGHEST POINT SHIELDING OPTION -BENHANCED GROUND TABS (SEE CHART) +0.10 -0.30 3.30 (2) PLACES PER PORT D 9.53 12.55 ±0.64 TYP 11.23 D 2.62 (2) PLACES PER PORT 2.70 0.64 SHIELD TAB OFFSET TYP 1.27 TYP CLASS C SURFACE SEE NOTE 9 3.81 CIRCUIT #1 REAR GROUND TABS 8.89 TYP 7.75 DIM "B" 10.29 C 12.85 NOTES: 1. MATERIAL: HOUSING: NYLON(PA), GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE SHIELD: BRASS, 0.18 THICK 2. FINISH: TERMINALS: SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. SHIELD: B 2.54 MICROMETERS NICKEL OVER 1.27 MICROMETERS COPPER UNDERPLATE; PCB GROUND TABS DIPPED IN TIN. 3. PRODUCT SPECIFICATION AND PROCESSING PARAMETERS: PS-44560-003. 4. PACKAGING SPECIFICATION: 2 PORT: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44560-004 4 PORT: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44560-005 5. CONFORMS TO FCC REGULATION PART 68.5 FOR MODULAR JACKS. 6. ENHANCED GROUND TABS SHIELD (OPTION -B-) IS SHOWN IN THIS DRAWING. (SEE CHART) 7. SEE SHEET (4) OF (4) FOR RECOMMENDED PANEL OPENING AND PCB LAYOUT. 8. TERMINAL LENGTHS MAY BE DIFFERENT FROM TERMINAL TO TERMINAL. 9. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC A SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED, WHICH IS A CLASS C SURFACE. 10. THIS PRODUCT IS COMPLIANT TO RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC. DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/07/12 C +1.00 -0.30 1.80 3.25 NUMBER OF NUMBER ASSEMBLY SHIELDING OPTION REAR GROUND OF PORTS MATERIAL NUMBER TABS 7 1 3 1 3 2 4 2 4 DIM "B" 29.44 58.19 29.44 58.19 25.68 54.43 25.68 54.43 B FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATED TO NX = PEG DETAIL SCALE 4:1 0 = 0 = 0 mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 02:57:59 8 A A B B 445600002 445600004 445600012 445600014 DIM "A" 6 5 4 COMPACT GANGED CATEGORY 5E MODJACK EC NO: 709327 DRWN: CCV CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: MKAMAR APPR: MKAMAR THIRD ANGLE PROJECTION 2018/02/10 2022/07/12 2022/07/12 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 0001/03/28 0001/03/28 DRAWING SERIES A3-SIZE 44560 3 SD-44560-001 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET G6 SHEET NUMBER 2 OF 4 1 A 10 9 8 7 5 6 4 3 2 1 F F 13.11 ±0.13 2.14 REF R0.38 TYP MAX BEZEL GROUND TABS 7.62 ±0.05 8.71 ±0.05 12.80 REF BEZEL HEIGHT 9.78 ±0.05 0.25 MAX RECOMMENDED E EDGE OF BEZEL DIM "C" SEE NOTE 6 RECOMMENDED PANEL OPENING (EACH PORT) FOR PMC BEZEL ONLY SHIELDING OPTION -CBEZEL GROUND TABS DIM "A" 14.38 TYP E TOP OF PCB 6.81 ±0.13 11.94 TYP 20.78 3.30 (2) PLACES PER PORT +0.10 -0.30 D D 9.53 11.23 2.62 (6) PLACES PER PORT 2.70 0.64 SHIELD TAB OFFSET TYP 5.03 3.81 1.80 C REAR GROUND TABS 1.27 TYP CLASS C SURFACE SEE NOTE 9 8.89 TYP 7.75 3.25 CIRCUIT #1 C DIM "B" 10.29 B A NOTES: 1. MATERIAL: HOUSING: NYLON(PA), GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE SHIELD: BRASS, 0.18 THICK PEG DETAIL 2. FINISH: SCALE 4:1 TERMINALS: SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. SHIELD: 2.54 MICROMETERS NICKEL OVER 1.27 MICROMETERS COPPER UNDERPLATE; PCB GROUND TABS DIPPED IN TIN. 3. PRODUCT SPECIFICATION AND PROCESSING PARAMETERS: PS-44560-003. 4. PACKAGING SPECIFICATION: 2 PORT: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44560-004 4 PORT: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44560-005 5. CONFORMS TO FCC REGULATION PART 68.5 FOR MODULAR JACKS. 6. THIS DIMENSION HAS A MAXIMUM OF 34.82 FOR THE (2) PORT PART AND 63.57 FOR THE (4) PORT PART WHEN THE JACK IS INSTALLED BEHIND THE BEZEL. 7. SEE SHEET (4) OF (4) FOR RECOMMENDED PCB LAYOUT. 8. TERMINAL LENGTHS MAY BE DIFFERENT FROM TERMINAL TO TERMINAL. 9. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED, WHICH IS A CLASS C SURFACE. 10. THIS PRODUCT IS COMPLIANT TO RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC. DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/07/12 12.85 "X"=NOT TOOLED X +1.00 -0.30 ASSEMBLY MATERIAL NUMBER SHIELDING OPTION 445600022 445600024 7 NUMBER OF PORTS DIM "A" DIM "B" DIM "C" 2 4 29.44 58.19 25.68 54.43 32.13 60.88 B FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATED TO NX = 0 = 0 = 0 mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 02:57:59 8 C C NUMBER OF REAR GROUND TABS 1 3 6 5 4 COMPACT GANGED CATEGORY 5E MODJACK EC NO: 709327 DRWN: CCV CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: MKAMAR APPR: MKAMAR THIRD ANGLE PROJECTION 2018/02/10 2022/07/12 2022/07/12 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 0001/03/28 0001/03/28 DRAWING SERIES A3-SIZE 44560 3 SD-44560-001 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET G6 SHEET NUMBER 3 OF 4 1 A 10 9 7 8 5 6 4 3 2 1 25.68 24.48 F F 13.47 SEE NOTE 1 ⌀0.89 TYP 10.10 1.79 TYP SEE NOTE 1 54.43 R1.02 MAX (2) PL ⌀1.57 (3) PL 8.89 REF 53.23 SEE NOTE 1 1.27 TYP E 42.23 SEE NOTE 1 E 38.85 7.75 TYP 12.85 TYP SEE NOTE 1 10.29 TYP 27.85 SEE NOTE 1 24.48 9.62 13.47 SEE NOTE 1 D ⌀3.25 (2) PL 3.81 (2) PL SEE NOTE 1 2.50 TYP ⌀0.89 TYP 1.79 TYP SEE NOTE 1 4.98 (2) PL 20.68 10.10 D 8.89 REF 1.27 TYP R1.02 MAX (2) PL ⌀1.57 (4) PL SEE NOTE 1 2 PORT ASSEMBLY PCB LAYOUT : COMPONENT SIDE RECOMMENDED PCB THICKNESS: 1.57 TOLERANCE ±.076 UNLESS OTHERWISE SPECIFIED 10.29 TYP 12.85 TYP 7.75 TYP SEE NOTE 1 C CIRCUIT #1 9.62 DIM "D" R0.25 MAX (4) PL ⌀3.25 (2) PL 11.73 4.98 (2) PL 49.43 3.81 (2) PL SEE NOTE 1 2.50 TYP 4 PORT ASSEMBLY PCB LAYOUT : COMPONENT SIDE RECOMMENDED PCB THICKNESS: 1.57 TOLERANCE ±.076 UNLESS OTHERWISE SPECIFIED 1.93 TOP OF PCB TO BOTTOM OF OPENING B C B 4 2 6 NOTES: 8 1. DIMENSIONS REFER TO ASSEMBLIES WITH SHIELDING OPTION NUMBER OF PORTS DIM "D" 2 4 30.20/1.189 58.95/2.321 1 3 5 7 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATED TO NX TYPICAL PC TERMINAL HOLE LAYOUT SCALE 5:1 RECOMMENDED PANEL OPENING SHIELDING OPTIONS A AND B A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/07/12 0 = 0 = 0 mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 02:57:59 8 = 7 6 5 4 COMPACT GANGED CATEGORY 5E MODJACK EC NO: 709327 DRWN: CCV CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: MKAMAR APPR: MKAMAR THIRD ANGLE PROJECTION 2018/02/10 2022/07/12 2022/07/12 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 0001/03/28 0001/03/28 DRAWING SERIES A3-SIZE 44560 3 SD-44560-001 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET G6 SHEET NUMBER 4 OF 4 1 A