0446611002

9 7 8 5 6 4 3 2 1 NOTES: 1) MATERIAL: HOUSING: NYLON(PA), GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE 2) FINISH: TERMINALS: SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. 3) PRODUCT SPECIFICATION AND PROCESSING PARAMETERS: PS-44560-003. 4) PACKAGING SPECIFICATION: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44661-004. 5) CONFORMS TO FCC REGULATION PART 68.5 FOR MODULAR JACKS. 6) SEE SHEET (4) OF (4) FOR RECOMMENDED PANEL OPENING AND PCB LAYOUT. 7) ASSEMBLY AVAILABLE WITH EITHER SNAP-FIT OR PRESS-FIT PEGS. THIS DRAWING SHOWS SNAP-FIT PEGS. 8) TERMINAL LENGTHS MAY BE DIFFERENT FROM TERMINAL TO TERMINAL. 9) THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED, WHICH IS A CLASS C SURFACE. E D E D 14.58 11.94 20.20 C C 9.19 10.77 2.46 REF B CLASS C SURFACE SEE NOTE 9 0.30 REF TYP 1.80 5.03 REF 3.25 3.25 2.62 (6) PLACES B CIRCUIT #1 3.30 (2) PLACES 7.75 REF 1.27 TYP 10.29 REF 0.51 REF TYP 8.89 REF 11.30 SYMBOLS SNAP-FIT PEG PRESS-FIT PEG ASSEMBLY MATERIAL NUMBER = 0 PEG STYLE = 0 446610002 A SNAP-FIT 446611002 = 0 PRESS-FIT 9 P1 RELEASE DATE 2019/03/11 8 14:38:38 C 7 6 5 4 3:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 DOCUMENT STATUS SCALE mm = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 0.5 ° 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS EC NO: 613335 DRWN: NSRIVATSAHS CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: MKAMAR APPR: MKAMAR THIRD ANGLE PROJECTION 3 2018/02/07 2019/03/11 2019/03/11 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 0001/04/07 0001/04/07 SD-44661-001 MATERIAL NUMBER DRAWING SERIES A3-SIZE 44661 2 A COMPACT SINGLE PORT CATEGORY 5E MODJACK SEE CHART PSD 001 G6 SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 4 9 7 8 5 6 4 3 2 NOTES: 1) MATERIAL: HOUSING: NYLON(PA), GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE SHIELD: BRASS, 0.18 THICK 2) FINISH: TERMINALS: SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. SHIELD: 2.54 MICROMETERS NICKEL OVER 1.27 MICROMTERS COPPER UNDERPLATE; PCB GROUND TABS DIPPED IN TIN 3) PRODUCT SPECIFICATION AND PROCESSING PARAMETERS: PS-44560-003. 4) PACKAGING SPECIFICATION: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44661-004. 5) CONFORMS TO FCC REGULATION PART 68.5 FOR MODULAR JACKS. 6) ENHANCED GROUND TABS SHIELD (OPTION -B-) IS SHOWN IN THIS DRAWING. 7) SEE SHEET (4) OF (4) FOR RECOMMENDED PANEL OPENING AND PCB LAYOUT. 8) ASSEMBLY AVAILABLE WITH EITHER SNAP-FIT OR PRESS-FIT PEGS. THIS DRAWING SHOWS SNAP-FIT PEGS. 9) TERMINAL LENGTHS MAY BE DIFFERENT FROM TERMINAL TO TERMINAL. 10) THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED, WHICH IS A CLASS C SURFACE. E D 15.06 1 E SHIELDING OPTION -ASTANDARD SHIELD D 20.78 ENHANCED GROUND TABS 11.94 SHIELDING OPTION -BENHANCED GROUND TABS 4.54 REF HIGHEST POINT C C 12.55 ±0.64 TYP 2.62 (6) PLACES 9.53 11.23 2.70 REF 5.03 REF B B 3.30 (2) PLACES 3.81 CLASS C SURFACE SEE NOTE 10 7.75 REF 1.27 TYP CIRCUIT #1 10.29 REF ASSEMBLY MATERIAL NUMBER PEG STYLE SHIELDING OPTION 446610001 SNAP-FIT A 8.89 REF 11.30 1.80 SYMBOLS 446610011 SNAP-FIT B 446611001 PRESS-FIT A = 0 3.25 3.25 = 0 A 446611011 446611131 = 0 B PRESS-FIT B PRESS-FIT DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2019/03/11 8 PRESS-FIT PEG C 7 6 5 4 3:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 14:38:38 SCALE mm = 0 = 0 SNAP-FIT PEG THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 0.5 ° 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS EC NO: 613335 DRWN: NSRIVATSAHS CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: MKAMAR APPR: MKAMAR THIRD ANGLE PROJECTION 3 2018/02/07 2019/03/11 2019/03/11 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 0001/04/07 0001/04/07 SD-44661-001 MATERIAL NUMBER DRAWING SERIES A3-SIZE 44661 2 A COMPACT SINGLE PORT CATEGORY 5E MODJACK SEE CHART PSD 001 G6 SHEET NUMBER CUSTOMER GENERAL MARKET 1 2 OF 4 9 7 8 E D 0.25 MAX RECOMMENDED 17.76 SEE NOTE 6 5 6 4 3 2 NOTES: 1) MATERIAL: HOUSING: NYLON (PA), GLASS FILLED, UL94V-0, COLOR: BLACK TERMINALS: PHOSPHOR BRONZE SHIELD: BRASS, 0.18 THICK 2) FINISH: TERMINALS: SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. SHIELD: 2.54 MICROMETERS NICKEL OVER 1.27 MICROMETERS COPPER UNDERPLATE; PCB GROUND TABS DIPPED IN TIN. 3) PRODUCT SPECIFICATION AND PROCESSING PARAMETERS: PS-44560-003. 4) PACKAGING SPECIFICATION: CONNECTOR PACKAGED IN TRAYS PER MOLEX PACKAGING SPECIFICATION PK-44661-004. 5) CONFORMS TO FCC REGULATION PART 68.5 FOR MODULAR JACKS. 6) THIS DIMENSION HAS A MAXIMUM OF 20.45 WHEN THE JACK IS INSTALLED BEHIND THE BEZEL. 7) SEE SHEET (4) OF (4) FOR PCB LAYOUT. 8) ASSEMBLY AVAILABLE WITH EITHER SNAP-FIT OR PRESS-FIT PEGS. THIS DRAWING SHOWS SNAP-FIT PEGS. 9) TERMINAL LENGTHS MAY BE DIFFERENT FROM TERMINAL TO TERMINAL. 10) THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 WITH THE EXCEPTION OF THE SURFACE INDICATED, WHICH IS A CLASS C SURFACE. 1 E D SHIELDING OPTION -CBEZEL GROUND TABS EDGE OF BEZEL 15.06 11.94 20.78 CIRCUIT #1 2.62 (6) PLACES C C 3.33 (2) PLACES RECOMMENDED PANEL OPENING FOR PMC BEZEL ONLY 9.53 11.23 13.11 ±0.13 R0.38 ±0.08 TYP 2.14 REF 2.70 REF 5.03 REF BEZEL GROUND TAB B CLASS C SURFACE SEE NOTE 10 7.75 REF 10.29 REF B 1.27 TYP 12.80 REF BEZEL HEIGHT 7.62 ±0.05 8.71 ±0.05 9.78 ±0.05 8.89 REF 11.30 SYMBOLS = 0 3.25 3.25 = 0 A "X" = NOT TOOLED ASSEMBLY MATERIAL NUMBER 446610021 X = 0 PEG STYLE SNAP-FIT 446611021 PRESS-FIT DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2019/03/11 8 PRESS-FIT PEG C 7 6 5 4 SCALE mm 1:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 14:38:38 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 = 0 SNAP-FIT PEG TOP OF PCB 6.81 ±0.13 1.80 1 PLACE ± 0 PLACES ± 0.5 ° 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS EC NO: 613335 DRWN: NSRIVATSAHS CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: MKAMAR APPR: MKAMAR THIRD ANGLE PROJECTION 3 2018/02/07 2019/03/11 2019/03/11 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 0001/04/07 0001/04/07 SD-44661-001 MATERIAL NUMBER DRAWING SERIES A3-SIZE 44661 2 A COMPACT SINGLE PORT CATEGORY 5E MODJACK SEE CHART PSD 001 G6 SHEET NUMBER CUSTOMER GENERAL MARKET 1 3 OF 4 9 7 8 6 5 4 3 E 2 1 E 11.30 10.09 8.89 REF 1.27 TYP ⌀0.89 TYP 1.79 TYP SEE NOTE 1 R0.25 MAX (4) PL R1.02 MAX (2) PL 15.82 ⌀1.57 (2) PL CIRCUIT #1 D D SEE NOTE 1 1.93 TOP OF PCB TO BOTTOM OF OPENING 11.73 10.29 TYP 7.75 TYP C 9.62 RECOMMENDED PANEL OPENING SHIELDING OPTIONS A AND B C 4.98 (2) PL 3.81 (2) PL SEE NOTE 1 6.30 ⌀3.25 (2) PL B 2 1 4 3 6 5 8 2.50 (2) PL B PCB LAYOUT: COMPONENT SIDE RECOMMENDED PCB THICKNESS (SNAP-FIT PEG) : 1.57 TOLERANCE ±.076 UNLESS OTHERWISE SPECIFIED 7 TYPICAL PC TERMINAL HOLE LAYOUT NOTES: 1. DIMENSIONS REFER TO ASSEMBLIES WITH SHIELDING OPITON SYMBOLS = 0 = 0 = 0 A 9 P1 RELEASE DATE 2019/03/11 8 14:38:38 C 7 6 5 4 4:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 DOCUMENT STATUS SCALE mm = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 0.5 ° 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS EC NO: 613335 DRWN: NSRIVATSAHS CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: MKAMAR APPR: MKAMAR THIRD ANGLE PROJECTION 3 2018/02/07 2019/03/11 2019/03/11 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 0001/04/07 0001/04/07 SD-44661-001 MATERIAL NUMBER DRAWING SERIES A3-SIZE 44661 2 A COMPACT SINGLE PORT CATEGORY 5E MODJACK SEE CHART PSD 001 G6 SHEET NUMBER CUSTOMER GENERAL MARKET 1 4 OF 4