0456270002

9 7 8 5 6 4 2 1 NOTES: 1. MATERIAL: PHOSPHOR BRONZE ALLOY 2. PLATING: 2.50µm/100µin TIN OVERALL OVER 1.25µm/50µin OVERALL NICKEL UNDERPLATING. 3. PART CONFORMS TO PRODUCT SPECIFICATION PS-45579-001. 4. TERMINAL FOR USE IN SPOX PLUG 45626. 5. FOR TERMINAL ORIENTATION SEE DRAWING SD-45626-001. 6. USE MOLEX EXTRACTION TOOL 63813-1400 TO REMOVE TERMINAL WITHOUT DAMAGE TO THE PLUG CORE. REMOVED TERMINAL IS NOT USABLE. 7. CONTACT WIPE IN 45626-0001 HOUSING WHEN MATED TO 08-70-1045 TERMINAL IN 45579-0001 HOUSING: STANDARD WIPE (ALL CIRCUITS EXCEPT CKT 1) 2.28mm +0.23/-0.25 FIRST-MAKE / LAST BREAK (CIRCUIT 1) 3.28mm +0.24/-0.26 TOLERANCE CALCULATED BY ROOT MEAN SQUARE METHOD (RMS) 0.34 MAX. TAB E 3 E D D 1.00 1.66 0.70 6.59 0.90 B 2.57 A 2.40 ±0.20 1.88 ±0.20 C 1.60 ±0.30 1.03 ±0.30 B 1.10 0.67 A C 2.15 ±0.30 2.15 0.61 SECTION A-A SECTION B-B 1.40 B B ⌀ 0.70 0.60 0.70 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM 8:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM A ± 3 PLACES ± ± 2 PLACES ± 0.13 ± ± 0.25 ± 1 PLACE 0 PLACES ± ANGULAR TOL DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-B REVISION: D DATE: 2018/01/18 9 P1 RELEASE DATE 2019/10/18 8 INCH 4 PLACES ± ± ± 0.5 ° THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:25:55 7 6 5 4 EC NO: 625546 DRWN: ABABU01 CHK'D: ISHWARG APPR: ISHWARG INITIAL REVISION: DRWN: KSTILES APPR: JCOMERCI 3 2017/06/30 2019/10/18 2019/10/18 0.70MM SPOX MALE CRIMP PIN TERMINAL 22-24AWG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/02/26 2004/05/18 DRAWING SERIES B-SIZE 45627 2 A SD-45627-002 MATERIAL NUMBER 45627-0002 PSD 001 B SHEET NUMBER CUSTOMER IBM 1 OF 1 1