0457503111

20 M L K 19 18 WIRE GAGE FORM ITEM NO. 457501111 CHAIN 457501112 LOOSE 457503111 CHAIN 457503112 LOOSE 457501211 CHAIN 457501212 LOOSE 457503211 CHAIN 457503212 LOOSE 457502211 CHAIN 17 DIM "B" 18-20 16 18-20 16 16 DIM "D" DIM "C" 15 DIM "E" 14 DIM "F" 13 .177±.016 (4.50±0.40) .035±.016 (0.90±0.40) .075±.012 (1.90±0.30) .091±.016 (2.30±0.40) .020 (0.50) .142±.012 (3.60±0.30) .177±.016 (4.50±0.40) .035±.016 (0.90±0.40) .091±.012 (2.30±0.30) .106±.016 (2.70±0.40) .024 (0.60) .142±.012 (3.60±0.30) .177±.016 (4.50±0.40) .035±.016 (0.90±0.40) .075±.012 (1.90±0.30) .091±.016 (2.30±0.40) .020 (0.50) .142±.012 (3.60±0.30) .177±.016 (4.50±0.40) .035±.016 (0.90±0.40) .091±.012 (2.30±0.30) .106±.016 (2.70±0.40) .024 (0.60) 10 11 9 7 8 6 5 4 3 2 1 M PLATING: SEE NOTE 2 DIM "G" .142±.012 (3.60±0.30) 12 NOTES: 1. MATERIAL: COPPER ALLOY .0080/(0.203) THICK 1 TIN OVER NICKEL 2. FINISH: 1. .000100/(0.00254) MIN. BRIGHT TIN OVER .000050/(0.00127) MIN NICKEL OVERALL. .433 11.00 L 2. .000030/(0.00076) MIN. SELECT GOLD IN CONTACT AREA AND .000100/(0.00254) MIN. SELECT MATTE TIN IN CRIMP AREA OVER .000050/(0.00127) MIN. NICKEL OVERALL. 2 SELECT GOLD OVER NICKEL GOLD PLATING RECOMMENDED FOR APPLICATIONS WHERE FRETTING CORROSION IS A CONCERN. 3. PRODUCT SPECIFICATION: PS-45750-001 .091±.012 (2.30±0.30) 22-24 .091±.016 (2.30±0.40) .024±.016 (0.60±0.40) .071±.012 (1.80±0.30) .065±.016 (1.65±0.40) .016 (0.40) 2 SELECT GOLD OVER NICKEL 4. PACKAGING SPECIFICATION : 55560001-PK FOR CHAIN TERMINALS PK-5556-003 FOR LOOSE TERMINALS K 5. TERMINAL FOR USE WITH 5557, 42474, 44516, 43760, AND 30067 SERIES HOUSINGS. 6. WHEN TERMINALS ARE INSTALLED IN THE HOUSING, THE WIRES ARE TO BE DRESSED IN SUCH A MANNER TO ALLOW THE TERMINALS TO FLOAT FREELY IN THE POCKET. 7. THIS TERMINAL IS DESIGNED FOR SINGLE WIRE CRIMPING. J J 8. TEXT ON PART IS FOR REFERENCE ONLY. TEXT AND TEXT LOCATION MAY VARY DEPENDING ON PART NUMBER AND/OR TOOL. .008 REF. CUT OFF VESTIGE 0.20 .067 1.70 CL .125±.016 3.18±0.41 H H LEGEND .072±.015 1.83±0.38 45750**1* .584±.016 14.83±0.41 G .217 5.50 F FORM 1 = CHAIN 2 = LOOSE BASE NUMBER .260 6.60 WIRE GAGE 1 = 18-20 2 - 22-24 3 = 16 .169 REF. 4.30 .028 MIN. 0.70 G PLATING (SEE NOTE 2) 1 = TIN OVER NICKEL 2 = SELECT GOLD F .083 2.10 .047 1.20 H A CL E E .064 1.63 CL .085 2.16 .101 2.57 A D D H "B" C "E" THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE HYBRID NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) "C" MM "F" B R"G" R "D" SECTION H-H SECTION A-A 4 PLACES ± ± 3 PLACES ± ± 0.25 ± 0.014 ± 0.36 ± 0 PLACES ± ± ANGULAR TOL A DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: E1 DATE: 2021/05/01 19 P1 RELEASE DATE 18 2022/03/08 17 ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:31:09 16 0.01 2 PLACES ± 1 PLACE 15 14 13 12 11 10 9 8 7 FEMALE CRIMP TERMINAL, PLUS HCS MINI-FIT JR. SERIES INCH EC NO: 697654 DRWN: HPAN18 CHK'D: XQZHANG APPR: XQZHANG INITIAL REVISION: DRWN: SML APPR: AP THIRD ANGLE PROJECTION 6 2022/03/01 2022/03/08 2022/03/08 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/01/30 2004/02/05 DRAWING SERIES D-SIZE 45750 5 SD-45750-001 MATERIAL NUMBER GENERAL MARKET 3 G6 SHEET NUMBER CUSTOMER SEE CHART 4 PSD 001 2 1 OF 1 1 A