0460111401

12 11 10 9 7 8 5 6 4 3 'HCS+' TO BE LASER MARKED LOCATED APPROXIMATELY AS SHOWN H 2 CIRCUIT SIZE DIM. "A" DIM. "B" 4 .17 (4.2) .38 (9.6) .535 .590 .685 (13.60) (15.00) (17.40) 6 .33 (8.4) .54 (13.8) .701 .756 .850 H (17.80) (19.20) (21.60) 10 .66 (16.8) .87 (22.2) 1.031 1.087 1.181 (26.20) (27.60) (30.00) 12 .83 (21.0) 1.04 (26.4) 1.187 1.252 1.346 (30.40) (31.80) (34.20) 14 .99 (25.2) 1.20 (30.6) 1.362 1.417 1.512 (34.60) (36.00) (38.40) 16 1.16 (29.4) 1.37 (34.8) 1.528 1.583 1.677 (38.80) (40.20) (42.60) 18 1.32 (33.6) 1.54 (39.0) 1.693 1.748 1.843 (43.00) (44.40) (46.80) 24 1.82 (46.2) 2.03 (51.6) 2.189 2.244 2.339 (55.60) (57.00) (59.40) HCS+ G LAST CIRCUIT 11 .098 (2.50) .073 (1.85) .071 (1.80) .008 (0.20) DIM. "C" DIM. "D" DIM. "E" .38 (9.6) .217 (5.50) .165 (4.20) REF. 46011 - * * 0 * F .165 (4.20) BASE NUMBER ℄ OF P.C. BOARD HOLES CKT.NO. 2 .22 (5.6) REF. .21 REF. (5.4) CKT.NO. 1 RIB INDICATES CIRCUIT #1 "D" REF. .55 (14.1) "E" REF. .165 (4.20) TYP. D 6 C .14 (3.6) .020±.003 (.50±.08) "C" ±.003 (±.08) B .217±.004 (5.50±.10) .118±.002 (3.00±.05) DIA. .14 (3.5) REF. RECOMMENDED HOLE LAYOUT FOR .070/(1.78)MAX. THICK P.C.BOARD (SCALE: 2X) FORMAT: master-tb-prod-C REVISION: B DATE: 2015/8/12 12 P1 RELEASE DATE 11 2015/10/07 C 18:00:37 10 9 8 7 6 0 D C B = 0 = 0 2015/09/08 2015/10/07 2015/10/07 ± 4 PLACES DATE --- 0 = 0 = 0 = 0 B2 3 PLACES ± --- 2 PLACES ± 0.25 1 PLACE ± 0.38 0 PLACES ± DATE DATE JCOMERCI DRAWING SIZE 4 MINI-FIT VERTICAL BMI HEADER ASSEMBLY (HCS PLUS SERIES) JCOMERCI APPR BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 2006/05/19 TGREGORI CHK'D BY = 5 DRWN BY ANGULAR TOL ± 1/2 ° REV CKT.NO.1 = ADD 46011-5001 .185±.003 (4.70±.08) 101245 NKN02 FSMITH FSMITH .165±.004 (4.20±.10) NON-ACCUMLATIVE RELEASE STATUS E QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL TOLERANCES IN/MM 4:1 = 0 (UNLESS SPECIFIED) .055±.002 DIA. TYP. (1.40±.05) A HOUSING MATERIAL & PLATING 0 = V-2 / TIN 1 = V-2 / GOLD 2 = V-0 / TIN 3 = V-0 / GOLD NOTES: 1) HOUSING MATERIAL & PLATING: 0 = NYLON 6/6, UNFILLED UL 94V-2, COLOR: NATURAL, MATTE TIN PLATING 1 = NYLON 6/6, UNFILLED UL 94V-2, COLOR: NATURAL, SELECT GOLD PLATING 2 = NYLON 6/6, UNFILLED UL 94V-0, COLOR: NATURAL, MATTE TIN PLATING 3 = NYLON 6/6, UNFILLED UL 94V-0, COLOR: NATURAL, SELECT GOLD PLATING TERMINAL MATERIAL : COPPER ALLOY 2) TERMINAL PLATING: ("TIN") .000100/(.00254) MIN. MATTE TIN OVER .000050/(.00127) MIN. NICKEL OVERALL. ("GOLD") .000030/(.00076) MIN. SELECT GOLD & .000100/(.00254) MIN. MATTE TIN OVER .000050/(.00127) MIN. NICKEL OVERALL. 3) PRODUCT SPECIFICATION: PS-45750-001 4) PACKAGING SPECIFICATION: PK-42440-001. 5) 6-24 CKT. PARTS MATE WITH MINI-FIT JR. RECEPTACLE 5557, VERTICAL RECEPTACLE HEADER 46010 & BMI RECEPTACLES 42474, AND 44516. 4 CKT PART MATES WITH 42474,44516 AND 46010 ONLY. 6 RIB LOCATION IS DETERMINED BY MOLD DESIGN FOR MANUFACTURING EASE AND THE LOCATION DOES NOT AFFECT PART FUNCTION OR PERFORMANCE. LOCATION OF RIBS MAY VARY ON PARTS WITHIN MANUFACTURING LOT OR SHIPMENT. THIS DRAWING SHOWS TYPICAL RIB LOCATIONS. 7) CONNECTOR ASSEMBLIES ARE NOT TO BE MATED OR UNMATED WHILE CIRCUITS ARE LIVE. 8) PART ALLOWS FOR UP .100/(2.54) MISALIGNMENT WITH MATING RECEPTACLE IN ANY DIRECTION. SEE MATING CONNECTOR DRAWINGS FOR SPECIFIC ALLOWANCES. 9) THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 10) CONNECTOR IS NOT DESIGNED FOR CURRENT SHARING. 11 12 CIRCUIT PARTS HAVE A SLOT BETWEEN CIRCUITS 7 AND 8. "A" REF. "B" CIRCUIT SIZE .026 REF. (0.65) EC NO: DRWN: CHK'D: APPR: E G LEGEND .59 (15.0) F 1 PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES THIRD ANGLE PROJECTION C 46011 SEE SHEET 2 DOCUMENT NUMBER GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER SD-46011-001 3 CUSTOMER 2 PSD 1 OF 2 000 1 A 12 H G F E 11 10 PART NUMBER CIRCUIT SIZE U.L. RATING PLATING 46011-0400 46011-0401 46011-0402 46011-0403 46011-0600 46011-0601 46011-0602 46011-0603 46011-1000 46011-1001 46011-1002 46011-1003 46011-1200 46011-1201 46011-1202 46011-1203 46011-1400 46011-1401 46011-1402 46011-1403 46011-1600 46011-1601 46011-1602 46011-1603 46011-1800 46011-1801 46011-1802 46011-1803 46011-2400 46011-2401 46011-2402 46011-2403 4 4 4 4 6 6 6 6 10 10 10 10 12 12 12 12 14 14 14 14 16 16 16 16 18 18 18 18 24 24 24 24 V-2 V-2 V-0 V-0 V-2 V-2 V-0 V-0 V-2 V-2 V-0 V-0 V-2 V-2 V-0 V-0 V-2 V-2 V-0 V-0 V-2 V-2 V-0 V-0 V-2 V-2 V-0 V-0 V-2 V-2 V-0 V-0 9 8 7 5 6 4 3 2 1 ℄ OF P.C. BOARD HOLES TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD TIN GOLD H "D" REF. LAST CIRCUIT .55 (14.1) .165 (4.20) REF. .098 (2.50) .071 (1.80) .073 (1.85) .008 (0.20) .59 (15.0) .217 (5.50) .38 (9.6) G .165 (4.20) CKT.NO.1 .14 TYP. (3.5) REF RIB INDICATES CIRCUIT #1 .22 (5.6) REF. .026 REF. (.65) .21 (5.4) REF. F "E" REF. "A" REF. E .14 (3.6) "C" .020±.003 (.50±.08) ±0.003 ±0.08 PART NUMBERS WITH VOIDED CIRCUITS D D PART NUMBER CIRCUIT SIZE U.L. RATING PLATING 46011-5001 14 V-0 VOIDED CIRCUITS 4,11 GOLD .217±.004 (5.50±.10) .118±.002 DIA. (3.00±.05) "B" .055±.002 DIA. TYP. (1.40±.05) C .165±.004 (4.20±.10) .185±.003 (4.70±.08) C CKT.NO.1 RECOMMENDED HOLE LAYOUT FOR .070/(1.78) MAX. THICK P.C.BOARD B B FORMAT: master-tb-prod-C REVISION: B DATE: 2015/8/12 12 P1 RELEASE DATE 11 2015/10/07 C 18:00:37 10 9 8 7 6 0 = 0 DATE --- 0 = 0 = 0 = 0 B2 3 PLACES ± --- 2 PLACES ± 0.25 1 PLACE ± 0.38 0 PLACES ± DATE DATE JCOMERCI DRAWING SIZE 4 MINI-FIT VERTICAL BMI HEADER ASSEMBLY (HCS PLUS SERIES) JCOMERCI APPR BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 2006/05/19 TGREGORI CHK'D BY = 5 ± 4 PLACES 101245 NKN02 FSMITH FSMITH = DRWN BY ANGULAR TOL ± 1/2 ° REV RELEASE STATUS 0 EC NO: DRWN: CHK'D: APPR: A = SEE SHEET 1 2015/09/08 2015/10/07 2015/10/07 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL TOLERANCES IN/MM 4:1 = 0 (UNLESS SPECIFIED) PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES THIRD ANGLE PROJECTION C 46011 SEE CHART DOCUMENT NUMBER GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER SD-46011-001 3 CUSTOMER 2 PSD 2 OF 2 000 1 A