0468190002

20 M PART NUMBER 19 CRIMP SIZE NUMBER OF TERMINALS PER REEL 8 900 46819-0012 L 18 6 46819-0013 900 17 16 15 PLATING 100µ INCHES OF MATTE SELECT TIN OVER 50µ INCHES OF NICKEL OVERALL WITH 30µ INCHES OF SELECT GOLD 14 DIM "A" WIDTH DIM "B" HEIGHT 7.12±0.25 .280±.010 7.84±0.30 .309±.012 7.62±0.25 .300±.010 8.92±0.30 .350±.012 13 12 10 11 9 7 8 5 6 4 3 2 1 M NOTES: 1. MATERIAL: COPPER ALLOY .80/.032 THICK 2. FINISH: PER MOLEX PLATING SPECIFICATION ES-88 - SEE CHART L 3. FOR CRIMP TOOLING CONTACT MOLEX OR VISIT THE MOLEX WEBSITE AT: WWW.MOLEX.COM 4. SEE PRODUCT SPECIFICATION: PS-46819-001 FOR MORE INFORMATION 5. FOR CRIMP SET UP INFORMATION SEE MOLEX APPLICATION SPECIFICATION DOCUMENT: 6 AWG - ATS-638320600 8 AWG - ATS-638320700 K K 6. DESIGNED TO MATE WITH MOLEX P/N 46817-****, 151035-****, 151053-****. 7. TERMINAL FOR USE WITH HOUSINGS 46818-000*, 170351-000*, 151034-00** 8. TERMINAL FOR USE WITH TPA 46821-0001, 151076-**** 33.89 REF 1.334 J J 18.5 .728 H H 10.91 .429 G "B" 6.10 .240 27.94 1.100 32.39 1.275 "A" G REF 0.35 MAX CARRIER .014 CUT-OFF TA ALLOWED F F TO CRIMPING 2.29±0.08 .090±.003 CL E D E OF PART D MINIMUM GOLD PLATING AREA SEE CHART FOR THICKNESS ON INSIDE OF CONTACTS MINIMUM TIN PLATING AREA, SEE CHART FOR THICKNESS ON INSIDE OF CRIMP C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm/in 4:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM B 4 PLACES ± ± 3 PLACES ± ± 0.005 2 PLACES ± 0.13 ± ± 0.25 ± 1 PLACE 0 PLACES ± A DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: E DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/07/26 17 ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 13:58:35 16 0.01 ± ANGULAR TOL 15 14 13 12 11 10 9 8 7 GUARDIAN TERMINAL - HIGH POWER CRIMP CONTACT INCH EC NO: 671147 DRWN: GSHARMA CHK'D: GSHARMA APPR: HTHYAGARAJ INITIAL REVISION: DRWN: JQUILES APPR: APATEL THIRD ANGLE PROJECTION 6 2021/07/19 2021/07/22 2021/07/26 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2009/03/09 2009/03/10 DRAWING SERIES D-SIZE 46819 5 SD-46819-001 MATERIAL NUMBER GENERAL MARKET 3 B1 SHEET NUMBER CUSTOMER SEE CHART 4 PSD 001 2 1 OF 1 1 A