0473092525

13 H 11 10 2.10 REF 9 7 8 5 6 4 3 2 1 H 0.10 MIN 4.60 5.10 ℄ OF CONNECTOR 5.50 G 12 G 5.70 14 F F 11.40 A 4.15 ℄ OF CONNECTOR 0.30 TYP PITCH ⌖ 0.15 A E 0.80 NOTES: 1. MATERIAL: 1-1 HOUSING: LCP, 30% G/F, UL 94V-0, BLACK 1-2 SIGNAL TERMINAL AND DETECT TERMINAL: PHOSPHOR BRONZE 1-3 METAL SHELL: STAINLESS STEEL 2. FINISH: 2-1 SIGNAL TERMINAL: 1.25 MICRON NICKEL MIN UNDER-PLATED, CONTACT AREA SEE TABLE, GOLD FLASH ON SOLDER AREA. 2-2 METAL SHELL: GOLD FLASH PLATED OVER NICKEL ON SOLDER AREA. 2-3 DETECT PIN: 1.25 MICRON NICKEL MIN UNDER-PLATED, GOLD FLASH ON CONTACT AREA, TIN PLATED ON SOLDER AREA. 3. PRODUCT SPECIFICATION: PS-47309-002. 4. PACKAGE SPECIFICATION: SEE TABLE. 5. PRODUCT COMPLIANT TO RoHS DIRECTIVE 2011/65/EU AND ELV 2000/53/EC. 4.05 5.25 1.00 E 0.60 1.00 1.10 D B ⌓ 0.08 FOR ALL SOLDER TERMINALS ℄ OF CONNECTOR C D 473092525 473090525 473098251 473091525 PART NUMBER 0.38 MICRON MIN. GOLD 0.38 MICRON MIN. GOLD 0.1 MICRON MIN. GOLD 0.76 MICRON MIN. GOLD CONTACT AREA PLATING C PK-47309-500 INK PK-47309-525 LASER DATE CODE PRINTING TYPE PACKAGE SPECIFICATION B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 15:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 0.15 ± ± 0.25 ± 1 PLACE A 0.30 TYP 0 PLACES ± ANGULAR TOL DOCUMENT STATUS P1 14 13 FORMAT: Met-lega-master-tb-prod-A2 REVISION: D DATE: 2018/01/18 RELEASE DATE 12 2023/05/12 04:01:36 11 EC NO: 746823 INCH DRWN: JANEQ CHK'D: FCHEN11 APPR: FCHEN11 INITIAL REVISION: DRWN: LLIU10 APPR: HWWANG ± ± 1.0 ° THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 5 5.25H MICRO-SD HEADER W / DETECT PIN 2023/04/24 2023/05/12 2023/05/12 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2008/11/05 2009/07/19 DRAWING SERIES A2-SIZE 47309 4 SD-47309-525 MATERIAL NUMBER SEE TABLE 3 PSD 000 L SHEET NUMBER CUSTOMER GENERAL MARKET 2 1 OF 2 1 A 10 9 7 8 5.60 6.20 5.40 6.00 5 6 4 3 2 1 9.70 ±0.10 0.70 1.45 0.55 F 0.20 2.45 1.25 F 0.80 SEE NOTES PIN4 PIN3 PIN2 PIN1 4.00 1.25 G2 0.60 TYP E 5.20 1.00 0.20 3.79 G1 0.60 E 1.40 1.10 TYP 2.35 PIN7 PIN6 PIN5 1.91 PIN8 G3 1.20 4.30 KEEP COMPONENTS OUT OF THIS SIDE D 15.20 0.85 G4 0.95 D NORMAL OPEN SWITCH FOR CARD DETECT 4.85 11.00 TFR CARD C G4 G3 B A CONNECTOR PROFILE RECOMMENDED PCB LAYOUT TOLERANCE FOR PCB LAYOUT : ±0.05 DET POL NOTES: NO CONDUCTIVE EXPOSURE TRACE IS ALLOWED ON THE SIDE FACE OF THE CARD AT THIS AREA. CARD PROFILE G2 GND G1 GND P8 DAT1 P7 DAT0 P6 VSS P5 CLK P4 VDD P3 CMD P2 CD/DAT3 P1 DAT2 NAME TYPE PIN ASSIGNMENT B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 1:1 DOCUMENT STATUS 10 P1 RELEASE DATE 9 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± ± 2 PLACES ± 0.15 ± ± 0.25 ± 1 PLACE 0 PLACES ± 2023/05/12 ± ± 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:01:36 8 INCH ± ANGULAR TOL FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 C 7 6 5 4 EC NO: 746823 DRWN: JANEQ CHK'D: FCHEN11 APPR: FCHEN11 INITIAL REVISION: DRWN: LLIU10 APPR: HWWANG THIRD ANGLE PROJECTION 2023/04/24 2023/05/12 2023/05/12 5.25H MICRO-SD HEADER W / DETECT PIN PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2008/11/05 2009/07/19 DRAWING SERIES A3-SIZE 47309 3 SD-47309-525 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 L SHEET NUMBER 2 OF 2 1 A