0480250002

5 6 4 3 2 1 1.06 2.54 TYP. J1 5.84 4X⌀1.02 xxxxxxxxxx P9 YYWWC MXT P10 P11 P12 P2 P8 LOGO 2.54 DATE CODE (YEAR,WEEK) 6.35 7.37 18.34 11.43 C 5.90 P10 6.75 +0.10 -0.07 P11 P12 1.27 B 2.4 MIN. P8 P2 A 2.54 TYP. SECTION A-A 2.54 TYP. 5.84 SYMBOLS = 0 = 0 = 0 A DOCUMENT STATUS 6 P1 RELEASE DATE 2020/05/28 5 00:36:57 C 4 SCALE mm 1:1 ANGULAR TOL ± 3.0 ° 4 PLACES ± 3 PLACES ± = 0 2 PLACES ± 0.25 1 PLACE ± 0.25 0 PLACES ± = 0 B CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 = 0 FORMAT: master-tb-prod-A4 REVISION: H DATE: 2018/01/18 2X⌀3.18±0.08 NOTES: 1.MATERIAL: METAL SHELL: BRASS. HOUSING: HIGH TEMP THERMOPLASTIC,GLASS FIBER FILLED, UL94V-0,COLOR:BLACK INSERT: HIGH TEMP THERMOPLASTIC,GLASS FIBER FILLED, UL94V-0,COLOR:BLACK TERMINAL: PHOSPHOR BRONZE. RESIN: UEP-700 2.PLATING: TERMINAL: CONTACT AREA: GOLD(Au), THICKNESS=50 MICROINCH/1.27 MICROMETER MINIMUM. SOLDER TAIL: TIN(Sn),THICKNESS=100 MICROINCH/2.54 MICROMETER MINIMUM. UNDER PLATE: NICKEL (Ni). METAL SHELL: SOLDER TAIL: TIN(Sn),THICKNESS=100 MICROINCH MINIMUM UNDER PLATE: NICKEL (Ni),(SOLDERING AVAILABLE) SURFACE APPEARANCE: BRIGHT. 3.RECOMMENDED PCB THICKNESS: 1.60±0.05 4.PRODUCT SPECIFICATION REFER TO PS-48025-004 5.TEST SUMMARY REFER TO TS-48025-006 6.PACKAGING SPECIFICATION REFER TO PK-48025-001 7.LEAD FREE AND ROHS COMPLIANCE PRODUCT 8.IR REFLOW APPLIFICATION PRODUCT 3.61 P1 P9 15.74±0.10 2X⌀1.63±0.08 P.C.B LAYOUT 1.07 .04 +0 8 ⌀ 11.43 FRONT A 5 -0.0 3.0 CL 6.35 3.30 2.54 0.63 6.78 +0.18 -0.02 1.00 ±0.10 10.80 3.30 8X⌀0.89 4.44 3.17 P1 16.00 ±0.25 D 2.54 TYP. BACK 7.37 2.80 ±0.20 SHIELD PIN D 25.40 MAX. 2.80 ±0.25 CONTACTS PIN & LED PIN 11.94 ±0.10 1.27 PART NUMBER 2.40 ±0.25 PRE-TIN HEIGHT 3.00 ±0.50 HOUSING POST 16.20 13.30 LED R LED L DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 3 EC NO: 637574 MODR JK RA DIP WITH LED DRWN: CCHEN103 CHK'D: SHLENI APPR: SHLENI INITIAL REVISION: DRWN: ALLIN APPR: WWSCHANG THIRD ANGLE PROJECTION 2019/08/30 MAGNETICS FOR IR REFLOW (LEAD FREE VERSION) 2020/05/28 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/10/07 2005/10/13 DRAWING SERIES A4-SIZE 48025 2 SD-48025-006 MATERIAL NUMBER 480250002 PSD 001 D1 SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 2 A 5 6 4 3 2 1 MAGNETIC ELECTRICAL SPECIFICATION D 100 KHz 1CT:1CT INSERTION LOSS 1.2 dB MAX J1 P1 J2 P2 INDUCTANCE (OCL) (MEDIA SIDE, 0° +70°C) J3 P7 P8 C 75 J4 ( AND WITH 8 mA DC BIAS J5 60-80 MHz 10 dB MIN. MEASURED AT 100 KHz, 100 mVRMS ) 10-100 MHz 50-17*LOG10(f/10) dB MIN. 30-200 MHz 2 MHz 15-20*LOG10(f/200) dB MIN. 50 dB MIN 0.60 OHMS MAX. DC RESISTANCE IMBALANCE HI-POT ISOLATION J7 75 C ±0.065 OHMS MAX (CENTER TAP SYMMETRY) 1500 VRMS AC NOTE: f IS FREQUENCY IN MHz. 75 P4 350 uH MIN DC RESISTANCE 1/2 WINDING 75 P5 30-60 MHz 10-20*LOG10 (f/60 MHz) dB MIN. 50 dB MIN COMMON MODE REJECTION RATIO J6 1CT:1CT 16 dB MIN 1 MHz CROSSTALK, ADJACENT CHANNELS P6 0.2+0.002*f^1.4 dB MAX 1-30 MHz RETURN LOSS (Z OUT=100 OHM±15%) P3 D SPECIFICATIONS 1-125 MHz PARAMETER RJ45 PCB J8 1000 pF 2KV LED ELECTRICAL SPECIFICATION PARAMETER MAGNETIC SCHEMATIC YELLOW (TYP.) GREEN (TYP.) UNITS POWER DISSIPATION 105 105 mW REVERSE VOLTAGE 5 590 5 V 565 nm lF=20mA V lF=20mA PEAK WAVELENGTH FORWARD VOLTAGE 2.1 MAX.=2.5 2.2 MAX.=2.5 TEST CONDITIONS P9 GREEN LED-L B B P10 P11 YELLOW LED-R P12 LED SCHEMATIC SYMBOLS = 0 = 0 = 0 A 6 P1 RELEASE DATE 2020/05/28 5 00:36:57 C 4 1:1 ANGULAR TOL ± 3.0 ° 4 PLACES ± 3 PLACES ± = 0 2 PLACES ± 0.25 1 PLACE ± 0.25 0 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 DOCUMENT STATUS SCALE mm = 0 = 0 FORMAT: master-tb-prod-A4 REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 3 EC NO: 637574 MODR JK RA DIP WITH LED DRWN: CCHEN103 CHK'D: SHLENI APPR: SHLENI INITIAL REVISION: DRWN: ALLIN APPR: WWSCHANG THIRD ANGLE PROJECTION 2019/08/30 MAGNETICS FOR IR REFLOW (LEAD FREE VERSION) 2020/05/28 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/10/07 2005/10/13 DRAWING SERIES A4-SIZE 48025 2 SD-48025-006 MATERIAL NUMBER 480250002 PSD 001 D1 SHEET NUMBER CUSTOMER GENERAL MARKET 1 2 OF 2 A