0480250091

10 9 7 8 5 6 4 3 2 1 2.54 TYP. 3.80 SHIELD PIN 16.20 11.94 ±0.10 J1 25.40 MAX. F 5.84 PART NUMBER 2.54 TYP. BACK xx xx xx xx xx xx MXT 4X⌀1.02 P9 7.37 LED R 3.18 ±0.25 CONTACTS PIN 3.30 ±0.25 LED PIN LED L 3.00 ±0.50 HOUSING POST 13.30 1.06 1.27 F P10 8X ⌀ 0.89 P11 P12 P2 P8 4.44 P1 18.34 11.43 LOGO 1.00 ±0.10 10.80 3.30 WEEK CODE (YEAR,WEEK) 2.54 6.35 7.37 1.07 5.90 P8 P9 P10 P11 P12 A C 1.27 2.54 TYP. 6.75+0.10 -0.07 2.4 MIN. P2 11.43 2X⌀3.18±0.08 15.74±0.10 D NOTES: 1.MATERIAL: METAL SHELL: BRASS HOUSING: POLYAMIDE, GLASS FIBER FILLED, UL94 V-0,COLOR BLACK INSERT: POLYAMIDE, GLASS FIBER FILLED, UL94 V-0,COLOR BLACK TERMINAL: PHOSPHOR BRONZE 2.PLATING: TERMINAL: CONTACT AREA: GOLD(Au), THICKNESS=50 MICROINCH/1.27 MICROMETER SOLDER TAIL: TIN(Sn), THICKNESS=100 MICROINCH MINIMUM UNDER PLATE: NICKEL (Ni). METAL SHELL: SOLDER TAIL: TIN(Sn), THICKNESS=100 MICROINCH MINIMUM UNDER PLATE: NICKEL (Ni),(SOLDERING AVAILABLE) SURFACE APPEARANCE: BRIGHT. 3.61 P1 . 2X⌀1.63±0.08 P.C.B LAYOUT D ⌀3 E FRONT A .04 +0 08 . 0 05 - 3.17 CL 6.35 3.30 2.54 16.00 ±0.25 0.63 6.78+0.18 -0.02 E SECTION A-A 2.54 TYP. C 3.RECOMMENDED PCB THICKNESS: 1.60±0.05 5.84 4.PRODUCT SPECIFICATION REFER TO PS-48025-005 5.TEST SUMMARY REFER TO TS-48025-007 6.PACKAGING SPECIFICATION REFER TO PK-48025-001 7.LEAD FREE AND RoHS COMPLIANT PRODUCT. B B SYMBOLS = 0 = 0 = 0 A 10 P1 RELEASE DATE 9 2020/05/28 00:36:58 8 C 7 6 5 2:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 DOCUMENT STATUS SCALE mm = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.25 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 637574 DRWN: CCHEN103 CHK'D: SHLENI APPR: SHLENI INITIAL REVISION: DRWN: ALLIN APPR: WWSCHANG THIRD ANGLE PROJECTION 2019/08/30 2020/05/28 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2006/10/04 2006/10/04 DRAWING SERIES A3-SIZE 48025 3 MODULAR JACK WITH INTEGRATED MAGNETICS WITH LED SD-48025-007 MATERIAL NUMBER PSD 001 CUSTOMER 48025-0091 GENERAL MARKET 2 D1 SHEET NUMBER 1 OF 2 1 A 10 9 7 8 6 5 4 3 2 1 MAGNETIC ELECTRICAL SPECIFICATION F F SPECIFICATIONS 1-125 MHz PARAMETER PCB RJ45 1CT:1CT 100 KHz INSERTION LOSS P1 1.2 dB MAX J1 (Z OUT=100 OHM±15%) J2 P2 16 dB MIN INDUCTANCE (OCL) 1 MHz J3 P7 J6 P8 1CT:1CT J4 75 J5 D P5 75 J7 75 75 P4 30-200 MHz 15-20*LOG10 (f/200) dB MIN. 50 dB MIN DC RESISTANCE 1/2 WINDING DC RESISTANCE IMBALANCE HI-POT ISOLATION E 50-17*LOG10 (f/10) dB MIN. 2 MHz COMMON MODE REJECTION RATIO 10 dB MIN. 10-100 MHz CROSSTALK, ADJACENT CHANNELS 50 dB MIN P6 60-80 MHz MEASURED AT 100 KHz, 100 mVRMS (AND ) WITH 8 mA DC BIAS 350 uH MIN (MEDIA SIDE, 0° +70°C) E 30-60 MHz 10-20*LOG 10 (f/60 MHz) dB MIN. 1-30 MHz RETURN LOSS P3 0.2+0.002*f^1.4 dB MAX 0.60 OHMS MAX. ±0.065 OHMS MAX (CENTER TAP SYMMETRY) D 1500 VRMS AC NOTE: f IS FREQUENCY IN MHz. J8 1000 pF 2KV LED ELECTRICAL SPECIFICATION YELLOW (TYP.) GREEN (TYP.) UNITS TEST CONDITIONS 105 105 mW POWER DISSIPATION REVERSE VOLTAGE V 5 5 590 565 nm lF=20mA PEAK WAVELENGTH 2.1 MAX.=2.5 2.2 MAX.=2.5 FORWARD VOLTAGE lF=20mA V PARAMETER MAGNETIC SCHEMATIC C C P9 GREEN LED-L P10 P11 YELLOW LED-R P12 B B LED SCHEMATIC SYMBOLS = 0 = 0 = 0 A 10 P1 RELEASE DATE 9 2020/05/28 00:36:58 8 C 7 6 5 1:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 DOCUMENT STATUS SCALE mm = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.25 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 637574 DRWN: CCHEN103 CHK'D: SHLENI APPR: SHLENI INITIAL REVISION: DRWN: ALLIN APPR: WWSCHANG THIRD ANGLE PROJECTION 2019/08/30 2020/05/28 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2006/10/04 2006/10/04 DRAWING SERIES A3-SIZE 48025 3 MODULAR JACK WITH INTEGRATED MAGNETICS WITH LED SD-48025-007 MATERIAL NUMBER PSD 001 CUSTOMER 48025-0091 GENERAL MARKET 2 D1 SHEET NUMBER 2 OF 2 1 A