0480251090

9 PART NUMBER xx xx 4X⌀1.02 MXT P12 P11 1.00 ±0.10 10.80 3.30 P1 4.44 WEEK CODE (YEAR,WEEK) 2.PLATING: TERMINAL: CONTACT AREA: GOLD(Au), THICKNESS=50 MICROINCH/1.27 MICROMETER SOLDER TAIL: TIN(Sn), THICKNESS=100 MICROINCH MINIMUM UNDER PLATE: NICKEL (Ni). METAL SHELL: SOLDER TAIL: TIN(Sn), THICKNESS=100 MICROINCH MINIMUM UNDER PLATE: NICKEL (Ni),(SOLDERING AVAILABLE) SURFACE APPEARANCE: BRIGHT. 3.RECOMMENDED PCB THICKNESS: 1.60±0.05 4.PRODUCT SPECIFICATION REFER TO PS-48025-005 5.TEST SUMMARY REFER TO TS-48025-009 6.PACKAGING SPECIFICATION REFER TO PK-48025-001 7.LEAD FREE AND RoHS COMPLIANT PRODUCT. SECTION A-A 2.54 TYP. 5.84 B LEFT RIGHT 48025-1090 GREEN GREEN 48025-1190 GREEN YELLOW SYMBOLS = 0 = 0 = 0 A 10 RELEASE DATE 9 2020/05/28 00:36:58 8 C 7 6 5 SCALE mm 1:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 P1 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 = 0 DOCUMENT STATUS C LED COLOR P/N FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 2X⌀3.18±0.08 15.74±0.10 NOTES: 1.MATERIAL: METAL SHELL: BRASS HOUSING: POLYAMIDE, GLASS FIBER FILLED, UL94 V-0,COLOR BLACK INSERT: POLYAMIDE, GLASS FIBER FILLED, UL94 V-0,COLOR BLACK TERMINAL: PHOSPHOR BRONZE 6.75+0.10 -0.07 2.4 MIN. A B 2X⌀1.63±0.08 11.43 D P10 P9 1.27 2.54 TYP. CL P.C.B LAYOUT 5.90 C E 3.17 FRONT P1 P12 P11 P2 LOGO 2.54 3.61 ⌀ 8X⌀0.89 P10 P9 P8 P2 P8 3.0 2.54 TYP. BACK 1.07 D .04 +0 .08 5 -0 F 1.27 xx xx xx xx 7.37 A 1 5.84 6.35 18.34 11.43 2 6.35 3.30 2.54 16.00 ±0.25 25.40 MAX. 0.63 6.78+0.18 -0.02 E 3 7.37 J1 4 2.54 TYP. 13.30 3.00 ±0.50 HOUSING POST 3.80 SHIELD PIN 16.20 11.94 ±0.10 5 6 1.06 LED R LED L F 7 8 3.18 ±0.25 CONTACTS PIN 3.30 ±0.25 LED PIN 10 1 PLACE ± 0 PLACES ± 3.0 ° 0.25 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 637574 DRWN: CCHEN103 CHK'D: SHLENI APPR: SHLENI INITIAL REVISION: DRWN: ALLIN APPR: WWSCHANG THIRD ANGLE PROJECTION 2019/08/30 2020/05/28 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2006/10/04 2006/10/04 DRAWING SERIES A3-SIZE 48025 3 MODULAR JACK WITH INTEGRATED MAGNETICS WITH LED SD-48025-009 MATERIAL NUMBER PSD 001 CUSTOMER SEE SHART 2 GENERAL MARKET D1 SHEET NUMBER 1 OF 2 1 A 10 9 7 8 5 6 4 3 2 1 F F MAGNETIC ELECTRICAL SPECIFICATIONS: 1.0 TURNS RATIO:(P4-P5-P6):(J3-J6):1CT:1CT (P3-P2-P1):(J1-J2):1CT:1CT 2.0 INDUCTANCE:(P4-P6):350uH MIN. @0.1V,100KHz,8mA DC Bias. (P3-P1):350uH MIN. @0.1V,100KHz,8mA DC Bias. 3.0 LEAKAGE INDUCTANCE:P6-P5-P4(WITH J6 AND J3 SHORT):0.3 MAX.@1MHz. P3-P2-P1(WITH J2 AND J1 SHORT):0.3 MAX.@1MHz. 4.0 INTERWINDING CAPACITANCE:(P6,P5,P4) TO (J6,J3):30pf MAX @1MHz. (P3,P2,P1) TO (J2,J1):30pf MAX @1MHz. 5.0 DC RESISTANCE:(J6-J3)=(J2-J1):1.3 ohms Max. 6.0 RETURN LOSS:(P4-P6)(P1-P3) 1MHz TO 30MHz:18dB min. 30MHz TO 80MHz:12dB min. NOTE:100 OHMS CONNECTED TO (J2-J1) OR (J3-J6). 7.0 HI-POT:(J1,J2) TO (P1,P3):1500 VAC OR 2250 VDC. (J3,J6) TO (P4,P6):1500 VAC OR 2250 VDC. 8.0 INSERTION LOSS:1.1 dB MAX. 100KHz TO 100MHz. 9.0 CROSS TALK:1-100 MHz:30 dB MIN. 10.0 COMMON TO COMMON MODE REJECTION:1MHz TO 100MHz:35 dB MIN. E D LED ELECTRICAL SPECIFICATION PARAMETER YELLOW (TYP.) GREEN (TYP.) UNITS 105 105 mW POWER DISSIPATION REVERSE VOLTAGE 5 585 PEAK WAVELENGTH FORWARD VOLTAGE 2.1 2.2 E V 5 565 MAX.=2.5 TEST CONDITIONS nm lF=20mA V lF=20mA MAX.=2.5 D RJ45 PCB 1CT:1CT 75 TD+ P1 TCT P2 TD- P3 RCT P5 C RD+ P4 1CT:1CT RD- P6 P7 P8 CHASSIS GND P10 J1 J2 J3 J4 J5 J6 J7 J8 75 75 LED-R P9 P12 LED-L P11 C LED SCHEMATIC 75 1000pF,2KV MAGNETIC SCHEMATIC B B SYMBOLS = 0 = 0 = 0 A 10 P1 RELEASE DATE 9 2020/05/28 00:36:58 8 C 7 6 5 1:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 DOCUMENT STATUS SCALE mm = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.25 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 637574 DRWN: CCHEN103 CHK'D: SHLENI APPR: SHLENI INITIAL REVISION: DRWN: ALLIN APPR: WWSCHANG THIRD ANGLE PROJECTION 2019/08/30 2020/05/28 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2006/10/04 2006/10/04 DRAWING SERIES A3-SIZE 48025 3 MODULAR JACK WITH INTEGRATED MAGNETICS WITH LED SD-48025-009 MATERIAL NUMBER PSD 001 CUSTOMER SEE SHART 2 GENERAL MARKET D1 SHEET NUMBER 2 OF 2 1 A