0524372733

10 9 7 8 6 5 4 3 2 1 NOTES 1.使用材料 MATERIAL ハウジング：ポリアミド(PA）、ナチュラル(白色)、ガラス充填、UL94V-0 HOUSING:POLYAMIDE NATURAL(WHITE)、GLASS FILLED,UL94V-0 アクチュエータ：ポリフェニレンサルファイド(PPS)、ナチュラル(茶色)、 ガラス充填、UL94V-0 ACTUATOR: PPS ,NATURAL(BROWN), GLASS FILLED, UL94V-0 ターミナル：リン青銅( t = 0.2) TERMINAL:PHOSPHOR BRONZE( t = 0.2) 金具：リン青銅( t = 0.2) FITTING NAIL: PHOSPHOR BRONZE( t = 0.2) 2.メッキ仕様 PLATING 　ターミナル TERMINAL 　　　　 錫銀ビスマスメッキ (1.0μm以上) TIN SILVER BISMUTH PLATING (1.0 MICROMETER MINIMUM) 下地メッキ：ニッケルメッキ (1.0μm以上) UNDER PLATING : NICKEL PLATING (1.0 MICROMETER MINIMUM) 　 金具 NAIL 　　　　 錫メッキ (1.0μm以上) TIN PLATING　(1.0 MICROMETER MINIMUM) 下地メッキ：ニッケルメッキ (1.0μm以上) UNDER PLATING : NICKEL PLATING (1.0 MICROMETER MINIMUM) 3.エンボステープ梱包時は、アクチュエータがロックした状態になります。 IN THE PACKAGE,ACTUATOR OF PART NO.52437-**22 SHOULD BE LOCKED. 4. 偶数極に適用 APPLY FOR EVEN CIRCUIT. 5. ﾊﾟﾀｰﾝ剥離止め金具 FITTING NAIL FOR PREVENTION OF PEELING OF P.W.B. PATTERN. 6. R0.3は、FPCの導体部にかからないこと R0.3 MUST NOT BE OVERLAPED TO PATTERN OF FPC. 7. 　ソルダーテール半田付け面のズレ量、及び金具半田付け面のズレ量は、 　基準面 H に対して上方向に0.1MAXIMUM、下方向に0.15MAXIMUMとする。 　MISALIGNMENT OF SOLDER TAILS AND FITTING NAILS FROM DATUM H. 　UPPER DIRECTION : 0.1 MAXIMUM 　LOWER DORECTION : 0.15MAXIMUM 8.ELV及びRoHS適合品 ELV AND RoHS COMPLIANT F 0.25 0.5 E D 21.6 21.1 20.6 20.1 19.6 19.1 18.6 18.1 17.6 17.1 C 7. K 5 B 金具 19.6 19.1 18.6 18.1 17.6 17.1 16.6 16.1 15.6 15.1 15.65 15.15 14.65 14.15 13.65 13.15 12.65 12.15 11.65 11.15 14.5 14.0 13.5 13.0 12.5 12.0 11.5 11.0 10.5 10.0 52437-3033 52437-2933 52437-2833 52437-2733 52437-2633 52437-2533 52437-2433 52437-2333 52437-2233 52437-2133 FITTING NAIL 1.65 D (A) D 30 29 28 27 26 25 24 23 22 21 EMBOSSED PACKAGE 極数 ORDER No. オーダー番号 CKT. C B CONNECTOR SERIES NO. : 52437-**22 0.65 0.9 GENERAL TOLERANCES (UNLESS SPECIFIED) 10 UNDER ±　0.2 10 OVER 30 UNDER ±　0.25 ±　0.3 30 OVER ANGULAR 　　±　3　° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS VIEW K 0.7 0.63 (金具部投影図) (DETAIL OF FITTING NAIL) 2.605 DOCUMENT STATUS B E THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION A FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 C F P1 RELEASE DATE 9 2022/11/03 08:33:20 8 7 6 5 DIMENSION UNITS SCALE mm 10:1 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.25 2 PLACES ± 0.3 1 PLACE ± 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5MM FPC CONN ZIF R/A HOUSING ASSY (LOWER CONTACT) EC NO: 724799 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: KMIYAHARA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2022/10/14 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/09/05 2013/04/05 DRAWING SERIES A3-SIZE 52437 3 SD-52437-023 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 A1 SHEET NUMBER 1 OF 2 1 A 7 8 5 6 4 3 2 0.3 ±0.05 0.3 ±0.05 仕上がり厚さ THICKNESS 0.5(N+1)±0.07 0.5±0.05 0.5±0.08 0.35+0.04 -0.03 0.3±0.03 (PITCH) 適合FFC推奨寸法 　　　 APPLICABLE FFC PLATING RECOMMENDED DIMENSION 仕上がり厚さ：0.3±0.05 仕上がり厚さ：0.3±0.05 THICKNESS: 0.3+0.05/-0.05 THICKNESS: 0.3+0.05/-0.05 0.8 (0.3) (ピッチ) 0.5±0.05 (PITCH) (公差非累積) 2.2 3.65 (0.3) KEEPING OUT AREA OF PATTERN AND SOLDERING 1.85MIN. 0.55MAX. パターンおよび 半田禁止エリア 0.5(N-1) 3.05 (NON-ACCUMULATIVE) 金具パターンエリア SOLDERING AREA OF FITTING NAIL (0.3) (0.3) C コネクタ位置 DETAIL L CONNECTOR POSITION 1.1 1.25 1.25 C FFC構成推奨仕様 STRUCTURE OF FFC FPC構成推奨仕様 STRUCTURE OF FPC L M 補強板：ポリエステル系 REINFORCE BOARD: PET 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 絶縁テープ：ポリエステル系(25μm) INSULATING FILM: PET(25μm) ±0.05 3.65 補強板：ポリイミド REINFORCE BOARD: POLYMIDE 熱硬化接着剤 THERMOSETTING ADHESIVE ベースフィルム：ポリイミド(25μm) BASE FILM: POLYIMIDE(25μm) 熱硬化接着剤 THERMOSETTING ADHESIVE 導体部：　銅箔(35 か 50μm) COPPER FOIL (35 or 50μm) 熱硬化接着剤 THERMOSETTING ADHESIVE 0.45MAX. E D (0.2) D めっき：錫めっき(0.5～1.2μm)　 　下地ニッケル(1-5μm) PLATING: TIN(0.5～1.2μm)　 　　　 NICKEL UNDER(1-5μm) 適合FPC推奨寸法 　　　 APPLICABLE FPC PLATING RECOMMENDED DIMENSION めっき：錫めっき(0.5～1.2μm)　 　下地ニッケル(1-5μm) PLATING: TIN(0.5～1.2μm)　 　　　 NICKEL UNDER(1-5μm) 6 6±0.5 6±0.5 E 0.5±0.08 0.5±0.05 補強板 (STIFFENER BOARD) 4±0.5 R0.3 0.5(N-1)±0.05 4±0.5 (PITCH) F 0.5(N+1)±0.07 0.5±0.1 補強板 (STIFFENER BOARD) 0.5±0.1 0.5(N-1)±0.05 仕上がり厚さ THICKNESS カバーレイ　:　ポリイミド(25μm) COVER FILM: POLYIMIDE(25μm) F 1 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 絶縁テープ：ポリエステル系(25μm) INSULATING FILM: PET(25μm) 9 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 導体部：　銅箔(35μmか50μm) COPPER FOIL (35μm or 50μm) 10 　　　　　FPC/FFCについて　ABOUT FPC/FFC 　　　　　打ち抜き方向は導体側から補強板側を推奨します。 　推奨基板レイアウト 接着剤の接点部への付着は導通不良の原因になりますので、染み出しが無い様、お願い致します。 （マウンド面） 　　　　　RECOMMENDED PUNCHING DIRECTION: FROM CONDUCTOR SIDE TO STIFFENER SIDE B RECOMMENDED P.C.BOARD 　　　　　PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE PATTERN DIMENSION THERE IS A POSSIBILITY THAT THE EXTRA ADHESIVE CAUSES THE DEFECT IN (MOUNTING SIDE) 　　　　　ELECTRICAL CONTINUITY. B PATTERN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION R0.3 (0.605) BOARD (FROM PATTERN EDGE) VIEW M マスク厚　　　　：　　100μm マスク開口率　　：　　100% SCREEN THICKNESS : 100μm SCREEN OPEN RATIO : 100% (DETAIL OF FITTING NAIL ON PATTERN) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 08:33:20 8 7 6 GENERAL TOLERANCES (UNLESS SPECIFIED) 10 UNDER ±　0.2 10 OVER 30 UNDER ±　0.25 ±　0.3 30 OVER ANGULAR 　　±　3　° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 DIMENSION UNITS SCALE mm 5:1 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.25 2 PLACES ± 0.3 1 PLACE ± 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5MM FPC CONN ZIF R/A HOUSING ASSY (LOWER CONTACT) EC NO: 724799 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: KMIYAHARA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2022/10/14 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/09/05 2013/04/05 DRAWING SERIES A3-SIZE 52437 3 SD-52437-023 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 A1 SHEET NUMBER 2 OF 2 1 A 10 9 8 7 6 5 4 3 2 1 F F 製品番号52437-**22の梱包状態はアクチュエータがロックした状態とする。 製品の詳細寸法については図面SD-52437-023を参照下さい。 IN THE PACKGE, ACTUATOR OF PART NO. 52437-**22 SHOULD BE LOCKED RE DETAILED DIMENSIONS, SEE SD-52437-023. 　 　　　 　　 E E D D 4.カバーテープの剥離強度については、IEC60286-3に準拠 COVER TAPE PEEL FORCE IS DEFINED BY IEC 60286-3. C C 6.ELV及びRoHS適合品 ELV AND RoHS COMPLIANT B B E AS LE CE E R EN EPR FER NLY RE SE O U THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.25 2 PLACES ± 0.3 1 PLACE ± 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:33:20 8 ANGULAR TOL 7 6 5 4 EMBOSS TAPE PACKAGED FOR 0.5MM FPC CONN ZIF R/A HOUSING ASSY EC NO: 724799 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: AISHII APPR: KMORIKAWA THIRD ANGLE PROJECTION 2022/10/14 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/09/10 2013/04/05 DRAWING SERIES A3-SIZE 52437 3 SD-52437-024 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET A SHEET NUMBER 1 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 F F 引き出し方向 PULL OUT DIRECTION (2.45) (2.45) トップテープ 1.5+0.1 0 0.2+0.15 -0.05 (6.1) TOP TAPE (C) (14.2) (B) 28.4±0.1 E 32±0.3 E 52437-**22 D 1.75±0.1 D 0.6±0.05 3.5±0.3 ±0.1 (2) 4 12±0.1 累積ピッチ 40±0.2 ACCUMULATIVE 40±0.2 PITCH ⌀1.5+0.1 0 SECT. Z-Z 32mm 幅キャリアテープ 32mm WIDTH CARRIER TAPE C C (4.9) (0.5) (0.5) 37.4 33.4 E D (2.4) 32 (0.5) B E AS LE CE E R EN EPR FER NLY RE SE O U SECT. X-X キャリアテープ幅 CARRIER TAPE WIDTH 22.4 21.9 21.4 20.9 20.4 19.9 19.4 18.9 15.8 15.3 14.8 14.3 13.8 13.3 12.8 12.3 21.4 20.9 20.4 19.9 19.4 18.9 18.4 17.9 (C) (B) (A) 29 28 27 26 25 24 23 B 22 極数 52437-2933 -2833 -2733 -2633 -2533 -2433 -2333 52437-2233 製品番号 MATERIAL.NO CKT THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.25 2 PLACES ± 0.3 1 PLACE ± 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:33:20 8 ANGULAR TOL 7 6 5 4 EMBOSS TAPE PACKAGED FOR 0.5MM FPC CONN ZIF R/A HOUSING ASSY EC NO: 724799 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: AISHII APPR: KMORIKAWA THIRD ANGLE PROJECTION 2022/10/14 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/09/10 2013/04/05 DRAWING SERIES A3-SIZE 52437 3 SD-52437-024 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET A SHEET NUMBER 2 OF 3 1 A 9 7 8 (6.1) F (2.45) 5 6 4 3 1.5+0.1 0 (2.45) トップテープ Z W TOP TAPE W 2 1 (6.1) 引き出し方向 PULL OUT DIRECTION (2.45) 0.2+0.15 -0.05 10 (2.45) F 引き出し方向 PULL OUT DIRECTION トップテープ TOP TAPE Y X 52437-**22 X (B) E (20.2) 0.5±0.05 3.4±0.3 SECT.Z-Z 1.75±0.1 (C) (B) 40.4±0.1 (A) 44±0.3 E (11.5) (A) 24±0.3 52437-**22 累積ピッチ 4 40±0.2 ACCUMULATIVE PITCH 40±0.2 12±0.1 ⌀1.5+0.1 0 D ±0.1 Y (2) D 24mm 幅キャリアテープ 24mm WIDTH CARRIER TAPE 4 40±0.2 24 ACCUMULATIVE PITCH 40±0.2 12±0.1 ⌀1.5 累積ピッチ +0.1 0 キャリアテープ幅 CARRIER TAPE WIDTH (2.4) 44mm WIDTH CARRIER TAPE 44 49.4 45.4 22.9 16.3 21.9 E D (C) (B) (A) キャリアテープ幅 11.8 17.4 E D (B) (A) 52437-3033 30 製品番号 極数 MATERIAL NO. 21 52437-2133 製品番号 極数 MATERIAL NO. CKT. (4.9) (0.5) (0.5) C (0.5) (0.5) CKT. (0.5) CARRIER TAPE WIDTH 25.4 (4.9) 44mm 幅キャリアテープ C 29.4 (2.4) SECT.Z-Z Z (2) (0.5) 1.75±0.1 0.6±0.05 3.5±0.3 ±0.1 SECT.W-W (44mm幅キャリアテープ) B SECT.X-X (24mm幅キャリアテープ) B E AS LE CE E R EN EPR FER NLY RE SE O U THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.25 2 PLACES ± 0.3 1 PLACE ± 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:33:20 8 ANGULAR TOL 7 6 5 4 EMBOSS TAPE PACKAGED FOR 0.5MM FPC CONN ZIF R/A HOUSING ASSY EC NO: 724799 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: AISHII APPR: KMORIKAWA THIRD ANGLE PROJECTION 2022/10/14 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/09/10 2013/04/05 DRAWING SERIES A3-SIZE 52437 3 SD-52437-024 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET A SHEET NUMBER 3 OF 3 1 A