0525593353

7 8 6 0.50 9 0.50 E 5 4 3 1.使用材料　MATERIAL ハウジング 　 : 46ナイロン、UL94V-0 HOUSING : PA46, UL94V-0 アクチュエータ：ポリフェニレンサルファイド（PPS）、UL94V-0 ACTUATOR : PPS, UL94V-0 ターミナル : リン青銅(t=0.2)　PHOS-BRO(ｔ＝0.2) : 接点部　金メッキ 0.1マイクロメートル以上 　　　　　　　　 CONTACT GOLD 0.1 MICROMETER MINIMUM : 半田付け部 錫メッキ　1.0マイクロメートル以上 　　　　　　　　 TAIL TIN 1.0 MICROMETER MINIMUM : ニッケル下地 1.0マイクロメートル以上 　　　　　　　　 NICKEL(UNDER PLATING)　1.0 MICROMETER MINIMUM 金具 　 : リン青銅(t=0.4) PHOS-BRO(ｔ＝0.4) 　　　　　　 : 錫メッキ 1.0マイクロメートル以上 　　　　　　　 TIN 1.0 MICROMETER MINIMUM : ニッケル下地 1.0マイクロメートル以上 NICKEL(UNDER PLATING) 1.0 MICROMETER MINIMUM 2 1 2.エンボステープ梱包時はアクチュエータがロックした状態とする。 IN THE PACKAGE, ACTUATOR OF PART NO.52559-**79 SHOULD BE LOCKED. 3 ソルダーテール半田付け面のズレ量、および金具半田付け面のズレ量は基準面 G に対し上方向 0.05MAXIMUM、下方向 0.15MAXIMUMとする。 MISALIGNMENT OF SOLDER TAILS AND FITTING NAILS FROM DATUM-G UPPER DIRECTION : 0.05MAXIMUM, LOWER DIRECTION : 0.15 MAXIMUM. 4 偶数極に適用。 APPLY FOR EVEN CIRCUIT. 5 パターンはく離止め金具。 FITTING NAIL FOR PREVENTION OF PEELING OF P.W.BOARD PATTERN. 6 R0.3は、FPCの導体部にかからないこと R0.3 MUST NOT BE OVERLAPPED TO PATTERN OF FPC. D E D 3.00 2.30 C 3.90 C B B 1.70 22.2 18.2 16.7 14.7 13.7 12.2 9.70 D 21.4 17.4 15.9 13.9 12.9 11.4 8.90 C 17.15 13.15 11.65 9.65 8.65 7.15 4.65 B 16.0 12.0 10.5 8.5 7.5 6.0 3.5 （A） 52559-3353 33 52559-2553 25 52559-2253 22 52559-1853 18 52559-1653 16 52559-1353 13 52559-0853 8 ORDER No. CKT. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 10:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/05/14 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:50:42 7 6 5 4 EC NO: 176518 DRWN: TNAKAGAWA01 CHK'D: RTAKEUCHI APPR: RTAKEUCHI INITIAL REVISION: DRWN: MNABEI APPR: NUKITA THIRD ANGLE PROJECTION 3 2018/05/09 2018/05/14 2018/05/14 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/04/27 2005/05/06 SD-52559-050 MATERIAL NUMBER DRAWING SERIES A3-SIZE 52559 2 A 0.5 FPC CONN ASSY ZIF FOR SMT EMBSTP PKG -LEAD FREE- SEE TABLE PSD 001 J SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 5 9 7 8 6 5 4 3 2 1 0.3 ±0.05 0.3 ±0.05 仕上がり厚さ THICKNESS 仕上がり厚さ THICKNESS E E D 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 絶縁テープ：ポリエステル系(25μm) INSULATING FILM: PET(25μm) 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 導体部：　銅箔(35μmか50μm) COPPER FOIL (35μm or 50μm) C 補強板：ポリエステル系 REINFORCE BOARD: PET 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 絶縁テープ：ポリエステル系(25μm) INSULATING FILM: PET(25μm) 補強板：ポリイミド REINFORCE BOARD: POLYMIDE 熱硬化接着剤 THERMOSETTING ADHESIVE ベースフィルム：ポリイミド(25μm) BASE FILM: POLYIMIDE(25μm) 熱硬化接着剤 THERMOSETTING ADHESIVE 導体部：　銅箔(35μm) COPPER FOIL (35μm) 熱硬化接着剤 THERMOSETTING ADHESIVE SCALE 8:1 0.90 0.90 D カバーレイ　:　ポリイミド(25μm) COVER FILM: POLYIMIDE(25μm) 0.90 めっき：金めっき(0.２μm)　 　下地ニッケル(1-5μm) PLATING: GOLD(0.2μm)　 　　　 NICKEL UNDER(1-5μm) めっき：金めっき(0.２μm)　 　下地ニッケル(1-5μm) PLATING: GOLD(0.2μm)　 　　　 NICKEL UNDER(1-5μm) 0.90 2-R0.30 C FFC構成推奨仕様 STRUCTURE OF FFC FPC構成推奨仕様 STRUCTURE OF FPC B B (2.7) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 5:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/05/14 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:50:42 7 6 5 4 EC NO: 176518 DRWN: TNAKAGAWA01 CHK'D: RTAKEUCHI APPR: RTAKEUCHI INITIAL REVISION: DRWN: MNABEI APPR: NUKITA THIRD ANGLE PROJECTION 3 2018/05/09 2018/05/14 2018/05/14 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/04/27 2005/05/06 SD-52559-050 MATERIAL NUMBER DRAWING SERIES A3-SIZE 52559 2 A 0.5 FPC CONN ASSY ZIF FOR SMT EMBSTP PKG -LEAD FREE- SEE SHEET 1 PSD 001 J SHEET NUMBER CUSTOMER GENERAL MARKET 1 2 OF 5 9 7 8 5 6 4 3 2 1 E E 梱包状態はアクチュエータがロックした状態とする。 IN THE PACKAGE, ACTUATOR SHOULD BE LOCKED. 　 　　　 　　 D D G±1 H±1 C C B B 6. 本製品は52559-**52のエンボステープ違い品である。 THIS PRODUCT IS EMBOSSED TAPE DIFFERENCE ARTICLE OF 52559-**52. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/05/14 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:50:42 7 6 5 4 EC NO: 176518 DRWN: TNAKAGAWA01 CHK'D: RTAKEUCHI APPR: RTAKEUCHI INITIAL REVISION: DRWN: MNABEI APPR: NUKITA THIRD ANGLE PROJECTION 3 2018/05/09 2018/05/14 2018/05/14 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/04/27 2005/05/06 SD-52559-050 MATERIAL NUMBER DRAWING SERIES A3-SIZE 52559 2 A 0.5 FPC CONN ASSY ZIF FOR SMT EMBSTP PKG -LEAD FREE- SEE SHEET 4-5 PSD 001 J SHEET NUMBER CUSTOMER GENERAL MARKET 1 3 OF 5 9 7 8 5 6 4 3 2 1 E D (F) (E) E D (2) C C B B 13.4 11.4 24 29.4 25.4 10.4 8.9 6.4 CARRIER TAPE WIDTH H G (F) 16.3 14.3 13.3 11.8 9.3 (E) 52559-2253 22 52559-1853 18 52559-1653 16 52559-1353 13 52559-0853 8 ORDER No. CKT. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/05/14 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:50:42 7 6 5 4 EC NO: 176518 DRWN: TNAKAGAWA01 CHK'D: RTAKEUCHI APPR: RTAKEUCHI INITIAL REVISION: DRWN: MNABEI APPR: NUKITA THIRD ANGLE PROJECTION 3 2018/05/09 2018/05/14 2018/05/14 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/04/27 2005/05/06 SD-52559-050 MATERIAL NUMBER DRAWING SERIES A3-SIZE 52559 2 A 0.5 FPC CONN ASSY ZIF FOR SMT EMBSTP PKG -LEAD FREE- SEE TABLE PSD 001 J SHEET NUMBER CUSTOMER GENERAL MARKET 1 4 OF 5 9 7 8 6 5 4 3 2 1 E (E) (F) E D D C C B B 32 37.4 33.4 CARRIER TAPE WIDTH H G 18.9 21.8 52559-3353 33 14.9 17.8 52559-2553 25 (F) (E) ORDER No. CKT. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/05/14 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:50:42 7 6 5 4 EC NO: 176518 DRWN: TNAKAGAWA01 CHK'D: RTAKEUCHI APPR: RTAKEUCHI INITIAL REVISION: DRWN: MNABEI APPR: NUKITA THIRD ANGLE PROJECTION 3 2018/05/09 2018/05/14 2018/05/14 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/04/27 2005/05/06 SD-52559-050 MATERIAL NUMBER DRAWING SERIES A3-SIZE 52559 2 A 0.5 FPC CONN ASSY ZIF FOR SMT EMBSTP PKG -LEAD FREE- SEE TABLE PSD 001 J SHEET NUMBER CUSTOMER GENERAL MARKET 1 5 OF 5