0526101733

10 9 7 8 6 5 4 3 2 1 F F 6 7 E E D D C 5 B 36.6 34.6 32.6 31.6 30.6 29.6 28.6 26.6 24.6 23.6 22.6 21.6 20.6 19.6 18.6 17.6 16.6 15.6 14.6 13.6 12.6 11.6 34.85 32.85 30.85 29.85 28.85 27.85 26.85 24.85 22.85 21.85 20.85 19.85 18.85 17.85 16.85 15.85 14.85 13.85 12.85 11.85 10.85 9.85 D (C) 52610-3033 30 52610-2833 28 52610-2633 26 52610-2533 25 52610-2433 24 52610-2333 23 52610-2233 22 52610-2033 20 52610-1833 18 52610-1733 17 52610-1633 16 52610-1533 15 52610-1433 14 52610-1333 13 52610-1233 12 52610-1133 11 52610-1033 10 52610-0933 9 52610-0833 8 7 52610-0733 52610-0633 6 5 52610-0533 EMBOSSED PACKAGE ORDER NO. 極数 B (A) オーダー番号 CKT. CONNECTOR SERIES NO.: 52610-**22 31.2 29.2 27.2 26.2 25.2 24.2 23.2 21.2 19.2 18.2 17.2 16.2 15.2 14.2 13.2 12.2 11.2 10.2 9.2 8.2 7.2 6.2 29 27 25 24 23 22 21 19 17 16 15 14 13 12 11 10 9 8 7 6 5 4 C B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) 10 UNDER ±　0.2 10 OVER 30 UNDER ±　0.25 ±　0.3 30 OVER ANGULAR 　　±　3　° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 08:33:22 8 7 6 5 DIMENSION UNITS SCALE mm 8:1 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.25 2 PLACES ± 0.3 1 PLACE ± 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 1.0 FPC CONN ZIF S/T HOUSING ASSY EC NO: 724799 DRWN: SUGEEB CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NASANUMA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2022/10/20 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/09/12 2013/03/15 DRAWING SERIES A3-SIZE 52610 3 SD-52610-048 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C1 SHEET NUMBER 1 OF 2 1 A 10 9 8 7 5 6 4 3 2 0.3 ±0.05 0.3 ±0.05 仕上がり厚さ THICKNESS F 1 仕上がり厚さ THICKNESS F めっき：錫めっき(0.5-1.2μm)　 　下地ニッケル(1-5μm) PLATING: TIN(0.5-1.2μm)　 　　　 NICKEL UNDER(1-5μm) E 適合FPC/FFC推奨寸法 APPLICABLE FPC RECOMMENDED DIMENSION RECMMENDED P.C.BOARD PATTERN DIMENSION (REF) （仕上がり厚さ：0.3±0.05） （マウント面） （THICKNESS: 0.3±0.05 ) (MOUNTING SIDE) マスク厚　　：120μm マスク開口率：100% SCREEN THICKNESS ：120 MICROMETER SCREEN OPEN RATIO ：100% B 　 MISALIGNMENT OF SOLDER TAILS FROM F UPPER DIRECTION 0.05 MAX., LOWER DIRECTION 0.15 MAX. ．ソルダーテールの平坦度は0.1mm以下とする。 SOLDERTAIL COPLANARITY IS 0.1MM MAXIMUM. 8．ELV及びRoHS適合品 ELV AND RoHS COMPLIANT DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 08:33:22 8 7 6 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 絶縁テープ：ポリエステル系(25μm) INSULATING FILM: PET(25μm) 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 導体部：　銅箔(35 or 50μm) COPPER FOIL (35 or 50μm) 補強板：ポリエステル系 REINFORCE BOARD: PET 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 絶縁テープ：ポリエステル系(25μm) INSULATING FILM: PET(25μm) FPC構成推奨仕様 FFC構成推奨仕様 RECOMMENDED STRUCTURE OF FPC RECOMMENDED STRUCTURE OF FFC C FPC/FFCについて： 　 抜き方向は、導体側から補強板側を推奨致します。 　 尚、接着剤の接点部への付着は導通不良の原因になりますので、 　 染み出しが無い様お願い致します。 ABOUT FPC/FFC: RECOMMENDED PUNCHER DIRECTION: FROM CONDUCTOR SIDE TO STIFFNER SIDE PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A POSSIBILITY THAT THE EXTRA ADHESIVE　 CAUSES THE　DEFECT IN ELECTRICAL CONTINUITY. B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 7 A カバーレイ　:　ポリイミド(25μm) COVER FILM: POLYIMIDE(25μm) 1．材質 MATERIAL 　ハウジング：ポリアミド(PA)，ナチュラル（白色），ガラス充填，UL94V-0　 　 HOUSING:POLYAMIDE, NATURAL(WHITE), GLASS FILLED, UL94V-0 　 アクチュエータ:ポリフェニレンサルファイドPPS,ナチュラル（茶色），ガラス充填，UL94-V0 　ACTUATOR：POLYPHENYLENE SULFIDE，NATURAL(BROWN), GLASS FILLED, UL94V-0 　 ターミナル：リン青銅（t=0.32) 　 TERMINAL:PHOSPHOR BRONZE(t=0.32) 2．めっき仕様 PLATING 　ターミナル TERMINAL 錫銀ビスマスめっき（1.0μm以上） TIN SILVER BISMUTH PLATING (1.0 MICROMETER MINIMUM) 下地：ニッケルめっき（1.0μm以上） UNDER PLATE:NICKEL PLATING (1.0 MICROMETER MINIMUM) 3 　．R0.3はFPCの導体部にかからないこと R0.3 MUST NOT BE OVERLAPED TO PATTERN OF FPC. 4．エンボステープ梱包時は、アクチュエータがロックした状態とする。 　 IN THE PACKAGE, ACTUATOR SHOULD BE LOCKED. 5 ．偶数極に適用。 APPLY FOR EVEN CIRCUIT. 6 ．ソルダーテール半田付け面のズレ量は、基準面 F に対し、上方向0.05MAX.、下方向0.15MAX.とする。 C E D 補強板：ポリイミド REINFORCE BOARD: POLYMIDE 熱硬化接着剤 THERMOSETTING ADHESIVE ベースフィルム：ポリイミド(25μm) BASE FILM: POLYIMIDE(25μm) 熱硬化接着剤 THERMOSETTING ADHESIVE 導体部：　銅箔(35 or 50μm) COPPER FOIL (35 or 50μm) 熱硬化接着剤 THERMOSETTING ADHESIVE D めっき：錫めっき(0.5-1.2μm)　 　下地ニッケル(1-5μm) PLATING: TIN(0.5-1.2μm)　 　　　 NICKEL UNDER(1-5μm) 3 GENERAL TOLERANCES (UNLESS SPECIFIED) 10 UNDER ±　0.2 10 OVER 30 UNDER ±　0.25 ±　0.3 30 OVER ANGULAR 　　±　3　° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 DIMENSION UNITS SCALE mm 5:1 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.25 2 PLACES ± 0.3 1 PLACE ± 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 1.0 FPC CONN ZIF S/T HOUSING ASSY EC NO: 724799 DRWN: SUGEEB CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NASANUMA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2022/10/20 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/09/12 2013/03/15 DRAWING SERIES A3-SIZE 52610 3 SD-52610-048 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C1 SHEET NUMBER 2 OF 2 1 A 10 9 8 7 6 5 4 3 2 1 F F 1．52610-**22のアクチュエータはハウジング内に押し下げた状態とする。 　　詳細寸法については図面SD-52610-048をご参照ください。 　　ACTUATOR OF PART NO. 52610-**22 SHULD BE LOCKED. 　　RE DETAILED DIMENSIONS, SEE SD-52610-048 2．梱包数量：1000個／リール 　 NUMBER OF CONNECTORS : 1000PCS/REEL 3．リードテープ長さ 　 LEAD TAPE LENGTH E E D D 4．カバーテープの剥離強度については、IEC60286-3に準拠 　 COVER TAPE PEEL FORCE IS DEFINED BY IEC60286-3. 5．材料(MATERIAL) 　　キャリアテープ（CARRIER TAPE)：ポリプロピレン（POLYPROPYLENE) 　　トップテープ（TOP TAPE)：PET, PE, PEF 　　リール(REEL)：ポリスチレン(PS) 　　　　　　　　　　　POLYSTYREN(PS) C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) MM A ± 3 PLACES ± ± 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 8 ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:33:23 7 6 5 4 EMBOSS TAPE PACKAGED FOR 1.0 FPC CONN ZIF S/T HOUSING ASSY INCH 4 PLACES ± ° EC NO: 724799 DRWN: SUGEEB CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NASANUMA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2022/10/20 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/09/05 2013/03/15 DRAWING SERIES A3-SIZE 52610 3 SD-52610-049 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 001 A2 SHEET NUMBER 1 OF 3 1 A 10 9 8 7 6 5 4 3 2 1 F F E E 52610-**22 D D C C 24 1033 0933 0833 0733 0633 0533 11.5 B 10.25 F 6.32 B 5 (E) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) MM A ± 3 PLACES ± ± 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 8 ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:33:23 7 6 5 4 EMBOSS TAPE PACKAGED FOR 1.0 FPC CONN ZIF S/T HOUSING ASSY INCH 4 PLACES ± ° EC NO: 724799 DRWN: SUGEEB CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NASANUMA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2022/10/20 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/09/05 2013/03/15 DRAWING SERIES A3-SIZE 52610 3 SD-52610-049 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 001 A2 SHEET NUMBER 2 OF 3 1 A 10 9 7 8 6 5 4 3 2 1 F キャリアテープ幅 CARRIER TAPE WIDTH F E D F E D (E) D 52610-**22 56 26.2 52.4 57.5 C 44 20.2 40.4 46.5 B 32 14.2 28.4 33.5 F (E) 35.25 33.25 31.25 30.25 29.25 28.25 27.25 25.25 23.25 22.25 21.25 20.25 19.25 18.25 17.25 16.25 31.32 29.32 27.32 26.32 25.32 24.32 23.32 21.32 19.32 18.32 17.32 16.32 15.32 14.32 13.32 12.32 30 28 26 25 24 23 22 20 18 17 16 15 14 13 12 11 52610-3033 52610-2833 52610-2633 52610-2533 52610-2433 52610-2333 52610-2233 52610-2033 52610-1833 52610-1733 52610-1633 52610-1533 52610-1433 52610-1333 52610-1233 52610-1133 C B D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) MM A ± 3 PLACES ± ± 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 8 ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:33:23 7 6 5 4 EMBOSS TAPE PACKAGED FOR 1.0 FPC CONN ZIF S/T HOUSING ASSY INCH 4 PLACES ± ° EC NO: 724799 DRWN: SUGEEB CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NASANUMA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2022/10/20 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/09/05 2013/03/15 DRAWING SERIES A3-SIZE 52610 3 SD-52610-049 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 001 A2 SHEET NUMBER 3 OF 3 1 A