0547220404

10 9 7 8 5 6 4 3 2 1 A 0.25 0.5 3 F (ピッチ) (PITCH) ハウジング HOUSING 5 0.5 0.05 +0.15 -0.05 Z D (ピッチ) (PITCH) �5� 0.5 参考基板レイアウト（マウント面） B トレードマーク TRADE MARK P.C.BOARD PATTERN DIMENSION (REFERENCE) (MOUNTING AREA) GENERAL TOLERANCES (UNLESS SPECIFIED) 0.25UNDER ±0.2 0.25OVER 0.5UNDER A 9 2020/11/30 8 7 6 5 8:1 ± ±0.2 4 PLACES ± 1.0OVER 10UNDER ±0.2 3 PLACES ± 10OVER 30UNDER ±0.25 2 PLACES ± 30OVER ±0.3 1.0 CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:37:43 SCALE mm ±0.2 OVER ANGULAR±3° RELEASE DATE DIMENSION UNITS UNDER 0.5 P1 D 30 極以下品形状 SHAPE OF 30 CIRCUITS OR LESS 注記 NOTES: 1. 使用材料 MATERIAL ハウジング：液晶ポリマーガラス充填, UL94V-0 (黒) HOUSING : LIQUID CRYSTRAL POLYMER (GLASS FILLED) 3. (全極数／2)＝偶数の場合に適用. UL94V-0 (COLOR:BLACK) APPLY FOR (CIRCUIT/2)=EVEN. C ターミナル：リン青銅 （t =0.15) 4. 嵌合相手：55560シリーズ(嵌合高さ＝1.5mm) TERMINAL : PHOSPHOR BRONZE (t=0.15) MATE WITH : 55560 SERIES.(HEIGHT=1.5mm) 2. メッキ仕様PLATING 5. テール平坦度は、0.1以下 金メッキ 0.25 マイクロメートル以上 （コンタクト部） TAIL COPLANARITY TO BE 0.1 MAXIMUM. GOLD 0.25 MICROMETER MINIMUM (CONTACT AREA). 8.0 7.0 10.1 54722-0304 30 金メッキ 0.4 マイクロメートル以下（テール部） 5.5 6.5 8.6 54722-0244 24 GOLD 0.4 MICROMETER MAXIMUM (TAIL AREA). 6.0 5.0 8.1 54722-0224 22 下地メッキ: ニッケルメッキ 1.5 マイクロメートル以上 5.5 4.5 7.6 54722-0204 20 UNDER PLATING : NICKEL 1.5 MICROMETER MINIMUM. 4.5 3.5 6.6 54722-0164 16 B *コンタクト部とテール部はニッケルメッキによって Emboss tape Package 極数 B A C 分断されている金メッキです. ORDER No. オーダー番号 CIRCUIT DIVIDE INTO PARTS THE GOLD PLATING OF THE CONTACT CONNECTOR SERIES No. 54722-***3 AND THE TAIL PART BY THE NICKEL PLATING. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DOCUMENT STATUS E 0.55 Z FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 0.3 ±0.05 SECTION Z-Z �0.5� ⌖ 0.15 Y 1.15 0.15 0.5 ±0.05 ターミナル TERMINAL 1.65 E B ±0.05 1.55 1.1 ±0.1 � B� 4.4 ±0.1 �0.5� Y 1.1 ±0.1 C �0.5� F �1.05� 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 MM PITCH B-TO-B CONN. HEIGHT = 1.5 RECEPTACLE EC NO: 642297 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: T.ITO APPR: T.YAMAGUCHI THIRD ANGLE PROJECTION 2020/07/29 2020/11/30 2020/11/30 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2003/08/20 2003/08/20 DRAWING SERIES A3-SIZE 54722 3 SD-54722-011 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 D SHEET NUMBER 1 OF 3 1 A 7 8 5 6 4 3 A �1.05� C Y 0.5 ±0.05 �B� 0.25 0.5 (ピッチ) (PITCH) 3 (ピッチ) (PITCH) ハウジング HOUSING ターミナル TERMINAL D 0.5 参考基板レイアウト（マウント面） �5� 0.5 Z 注記 NOTES: 3. (全極数／2)＝偶数の場合に適用. 1. 使用材料 MATERIAL APPLY FOR (CIRCUIT/2)=EVEN. ハウジング：液晶ポリマーガラス充填, UL94V-0 (黒) 4. 嵌合相手：55560シリーズ(嵌合高さ＝1.5mm) HOUSING : LIQUID CRYSTRAL POLYMER (GLASS FILLED) MATE WITH : 55560 SERIES.(HEIGHT=1.5mm) C UL94V-0 (COLOR:BLACK) 5. テール平坦度は、0.1以下 ターミナル：リン青銅 （t =0.15) TAIL COPLANARITY TO BE 0.1 MAXIMUM. TERMINAL : PHOSPHOR BRONZE (t=0.15) 2. メッキ仕様PLATING 金メッキ 0.25 マイクロメートル以上 （コンタクト部） 20.5 19.5 22.6 54722-0804 80 GOLD 0.25 MICROMETER MINIMUM (CONTACT AREA). 15.5 14.5 17.6 54722-0604 60 金メッキ 0.4 マイクロメートル以下（テール部） 13.0 12.0 15.1 54722-0504 50 GOLD 0.4 MICROMETER MAXIMUM (TAIL AREA). 10.5 9.5 12.6 54722-0404 40 下地メッキ: ニッケルメッキ 1.5 マイクロメートル以上 9.5 8.5 11.6 54722-0364 36 UNDER PLATING : NICKEL 1.5 MICROMETER MINIMUM. 9.0 8.0 11.1 54722-0344 34 B *コンタクト部とテール部はニッケルメッキによって Emboss tape Package 極数 B A C 分断されている金メッキです. ORDER No. オーダー番号 CIRCUIT DIVIDE INTO PARTS THE GOLD PLATING OF THE CONTACT CONNECTOR SERIES No. 54722-***3 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION AND THE TAIL PART BY THE NICKEL PLATING. B トレードマーク TRADE MARK GENERAL TOLERANCES (UNLESS SPECIFIED) 0.25UNDER ±0.2 0.25OVER 0.5UNDER A RELEASE DATE 9 2020/11/30 8 7 6 5 8:1 ± ±0.2 4 PLACES ± 1.0OVER 10UNDER ±0.2 3 PLACES ± 10OVER 30UNDER ±0.25 2 PLACES ± 30OVER ±0.3 1.0 CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:37:43 SCALE mm ±0.2 OVER ANGULAR±3° P1 DIMENSION UNITS UNDER 0.5 DOCUMENT STATUS D 34 極以上品形状 SHAPE OF 34 CIRCUITS OR MORE 0.55 C FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 E P.C.BOARD PATTERN DIMENSION (REFERENCE) (MOUNTING AREA) 0.05 +0.15 -0.05 ⌖ 0.15 Y 1.15 Z �0.5� SECTION Z-Z 0.15 0.3 ±0.05 1.55 5 1.65 E F 4.4 ±0.1 �0.5� 1 B ±0.05 �0.5� F 2 1.1 ±0.1 9 1.1 ±0.1 10 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 MM PITCH B-TO-B CONN. HEIGHT = 1.5 RECEPTACLE EC NO: 642297 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: T.ITO APPR: T.YAMAGUCHI THIRD ANGLE PROJECTION 2020/07/29 2020/11/30 2020/11/30 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2003/08/20 2003/08/20 DRAWING SERIES A3-SIZE 54722 3 SD-54722-011 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 D SHEET NUMBER 2 OF 3 1 A 10 9 8 7 5 6 4 3 2 1 F F 嵌合相手 MATE WITH 55560-***7/-***8 E �1.5� E 有効嵌合長 MATING LENGTH D �0.45� D C C 嵌合断面図（参考） MATED DRAWING (REF.) B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) 0.25UNDER ±0.2 0.25OVER 0.5UNDER DOCUMENT STATUS P1 RELEASE DATE 9 2020/11/30 ± ±0.2 4 PLACES ± 1.0OVER 10UNDER ±0.2 3 PLACES ± 10OVER 30UNDER ±0.25 2 PLACES ± 30OVER ±0.3 1.0 8 7 6 5 CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:37:43 20:1 ±0.2 OVER ANGULAR±3° FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 SCALE mm UNDER 0.5 A DIMENSION UNITS 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 MM PITCH B-TO-B CONN. HEIGHT = 1.5 RECEPTACLE EC NO: 642297 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: T.ITO APPR: T.YAMAGUCHI THIRD ANGLE PROJECTION 2020/07/29 2020/11/30 2020/11/30 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2003/08/20 2003/08/20 DRAWING SERIES A3-SIZE 54722 3 SD-54722-011 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 D SHEET NUMBER 3 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 注記 NOTE 1. 製品詳細寸法については図面 SD-54722-011 を参照下さい. DETAIL DIMENSIONS, SEE SD-54722-011 2. 梱包数量 : 3000個／リール NUMBER OF CONNECTORS : 3000PCS/REEL 3. リードテープ長さ LEAD TAPE LENGTH F 引き出し方向 PULL OUT DIRECTION F 20PCSMIN. トップテープ接着部（空工ンボス） TOP TAPE BONDED PART. (EMPTY) 引き出し方向 PULL OUT DIRECTION 380 ±2 (⌀80) E 部品挿入部 COMPONENT SUPPLIER 400MIN. E 末端部 (空部) TAIL PART (EMPTY) 40MIN. 4. カバーテープの剥離強度については、IEC60286-3に準拠 COVER TAPE PEEL FORCE IS DEFINED BY IEC60286-3. 5. 材料 (MATERIAL) キャリアテープ (CARRIER TAPE) : ポリプロピレン (POLYPROPYLENE) トップテープ (TOP TAPE) : PET,PE,PEF リール (REEL)：ポリスチレン (PS) ＜リサイクル材を含む＞ POLYSTYRENE(PS) ＜RECYCLE MATERIAL CONTAINED＞ D "F" D B ±1 C ±1 C C (⌀10) °� �22� 20 �1 �2� B B (⌀21) (⌀13) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) A 9 2020/12/02 ± ± 10OVER30UNDER ±0.25 2 PLACES ± 30OVER ±0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:53:46 8 7 6 5 ± 3 PLACES ANGULAR±3° RELEASE DATE ANGULAR TOL 4 PLACES 10 P1 NTS ±0.2 UNDER DOCUMENT STATUS SCALE mm CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) DETAIL "F" FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 DIMENSION UNITS 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 649457 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: T.ITO APPR: Y.YAMAGUCHI THIRD ANGLE PROJECTION 2020/07/29 2020/12/02 2020/12/02 0.5 MM PITCH B-TO-B CONN. HEIGHT = 1.5 RECEPTACLE EMBOSS TAPE PACKAGE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2003/08/20 2003/08/20 DRAWING SERIES A3-SIZE 54722 3 SD-54722-012 MATERIAL NUMBER CUSTOMER SEE SHEET 2-5 2 GENERAL PSD 001 D SHEET NUMBER 1 OF 5 1 A 10 9 7 8 5 6 4 3 2 1 F F F 引き出し方向 0.5 ±0.05 �2.25� C �A� �7.5� 1.75 ±0.1 D �5.2� �6.2� 54722-***3 16 ±0.3 �A� トップテープ TOP TAPE �2.6� E �1.4� E �6.2� �5.2� PULL OUT DIRECTION ⌀ 1.5 +0.1 0 SECTION X-X D �2� 12 ±0.1 4 ±0.1 累積ピッチ 40±0.2 ACCUMULATIVE PITCH 40±0.2 C SECTION Y-Y 16 mm幅キャリアテープ 16mm WIDTH CARRIER TAPE 16 21.4 17.4 6.8 キャリアテープ幅 CARRIER TAPE WIDTH C B (A) B 54722-0204 20 54722-0164 16 MATERIAL NO. 極数 CIRCUIT B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) GENERAL TOLERANCES (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 10OVER30UNDER ±0.25 2 PLACES ± 30OVER ±0.3 10 ANGULAR±3° DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/12/02 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:53:46 8 7 6 5 ± ±0.2 UNDER A ANGULAR TOL 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 649457 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: T.ITO APPR: Y.YAMAGUCHI THIRD ANGLE PROJECTION 2020/07/29 2020/12/02 2020/12/02 0.5 MM PITCH B-TO-B CONN. HEIGHT = 1.5 RECEPTACLE EMBOSS TAPE PACKAGE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2003/08/20 2003/08/20 DRAWING SERIES A3-SIZE 54722 3 SD-54722-012 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 D SHEET NUMBER 2 OF 5 1 A 10 9 7 8 5 6 4 3 2 1 F F 引き出し方向 �5.2� �2.6� E トップテープ TOP TAPE �2.25� C ⌀ �A� SECTION X-X D �11.5� 1.75 ±0.1 24 ±0.3 0.5 ±0.05 E �5.2� 54722-***3 �A� D �6.2� �6.2� �1.4� PULL OUT DIRECTION �2� 12 ±0.1 4 ±0.1 1.5 +0.1 0 累積ピッチ 40±0.2 ACCUMULATIVE PITCH 40±0.2 C SECTION Y-Y 24 mm幅キャリアテープ 24mm WIDTH CARRIER TAPE 24 29.4 25.4 B キャリアテープ幅 CARRIER TAPE WIDTH C B 15.3 54722-0504 50 12.8 54722-0404 40 11.8 54722-0364 36 11.3 54722-0344 34 10.3 54722-0304 30 8.8 54722-0244 24 8.3 54722-0224 22 (A) MATERIAL NO. 極数 CIRCUIT B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) GENERAL TOLERANCES (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 10OVER30UNDER ±0.25 2 PLACES ± 30OVER ±0.3 10 ANGULAR±3° DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/12/02 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:53:46 8 7 6 5 ± ±0.2 UNDER A ANGULAR TOL 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 649457 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: T.ITO APPR: Y.YAMAGUCHI THIRD ANGLE PROJECTION 2020/07/29 2020/12/02 2020/12/02 0.5 MM PITCH B-TO-B CONN. HEIGHT = 1.5 RECEPTACLE EMBOSS TAPE PACKAGE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2003/08/20 2003/08/20 DRAWING SERIES A3-SIZE 54722 3 SD-54722-012 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 D SHEET NUMBER 3 OF 5 1 A 10 9 7 8 5 6 4 3 2 1 F F 引き出し方向 �5.2� �6.2� 1.5 +0.1 0 54722-***3 �5.2� E SECTION X-X �A� 28.4 ±0.1 �A� 32 ±0.3 トップテープ TOP TAPE D 1.75 ±0.1 �14.2� D �6.2� 0.2 +0.15 -0.05 E �2.6� �1.4� PULL OUT DIRECTION 0.5 ±0.05 �2.25� C �2� ⌀ 1.5 +0.1 0 SECTION Y-Y 12 ±0.1 4 ±0.1 C 累積ピッチ 40±0.2 ACCUMULATIVE PITCH 40±0.2 32 mm幅キャリアテープ 32mm WIDTH CARRIER TAPE B B 32 37.4 33.4 17.8 54722-0604 60 キャリアテープ幅 CARRIER TAPE WIDTH C B (A) MATERIAL NO. 極数 CIRCUIT THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) GENERAL TOLERANCES (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 10OVER30UNDER ±0.25 2 PLACES ± 30OVER ±0.3 10 ANGULAR±3° DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/12/02 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:53:46 8 7 6 5 ± ±0.2 UNDER A ANGULAR TOL 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 649457 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: T.ITO APPR: Y.YAMAGUCHI THIRD ANGLE PROJECTION 2020/07/29 2020/12/02 2020/12/02 0.5 MM PITCH B-TO-B CONN. HEIGHT = 1.5 RECEPTACLE EMBOSS TAPE PACKAGE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2003/08/20 2003/08/20 DRAWING SERIES A3-SIZE 54722 3 SD-54722-012 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 D SHEET NUMBER 4 OF 5 1 A 10 9 7 8 F 5 6 4 3 2 1 F 引き出し方向 �5.2� PULL OUT DIRECTION �2.6� �6.2� 0.2 +0.15 -0.05 1.5 +0.1 0 54722-***3 トップテープ TOP TAPE �6.2� E �1.4� D 1.75 ±0.1 �20.2� D E SECTION X-X �A� 40.4 ±0.1 �A� 44 ±0.3 �5.2� 0.5 ±0.05 �2.25� C �2� 12 ±0.1 4 ±0.1 C 累積ピッチ 40±0.2 ACCUMULATIVE PITCH 40±0.2 ⌀ 1.5 +0.1 0 SECTION Y-Y 44 mm幅キャリアテープ 44mm WIDTH CARRIER TAPE B B 44 49.4 45.4 22.8 54722-0804 80 キャリアテープ幅 CARRIER TAPE WIDTH C B (A) MATERIAL NO. 極数 CIRCUIT THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) GENERAL TOLERANCES (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 10OVER30UNDER ±0.25 2 PLACES ± 30OVER ±0.3 10 ANGULAR±3° DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/12/02 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:53:46 8 7 6 5 ± ±0.2 UNDER A ANGULAR TOL 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 649457 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: T.ITO APPR: Y.YAMAGUCHI THIRD ANGLE PROJECTION 2020/07/29 2020/12/02 2020/12/02 0.5 MM PITCH B-TO-B CONN. HEIGHT = 1.5 RECEPTACLE EMBOSS TAPE PACKAGE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2003/08/20 2003/08/20 DRAWING SERIES A3-SIZE 54722 3 SD-54722-012 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 D SHEET NUMBER 5 OF 5 1 A