0621003800

HSD/VHDM Tooling *HDM® is a registered trademark of Teradyne, Inc. VHDM® and *HDM® Joiner / Ground Insertion Tool Application Tooling Specification Sheet Order No. 62100-3800 FEATURES A pliers-type tool used in the insert joiner and ground modules, which reduces replacement costs Lightweight manual tool that is easy to use SCOPE Products 2.00mm (.079") Pitch, VHDM® and VHDM-HSD* Joiner and Ground Modules, 5, 6 and 8 Row, *HDM® Joiner and Ground Modules. *Note VHDM® and VHDM-HSD are registered trademarks of Amphenol Corporation. Product List The following is a partial list of the product order numbers and their specifications this tool is designed to run. Updates to this list are available on www.molex.com. Order No. Description 73773-0010 HDM® Joiner Module 73773-0020 HDM® Joiner Module 73773-1000 HDM® Daughtercard Ground 74039-0003 VHDM-GbX® Joiner Left Joiner Module 74039-0004 VHDM-GbX® Right Joiner Module 74039-1000 VHDM® RA Male Grounded Guide Module 74039-1200 VHDM® RA Male Grounded Guide Module 74039-1500 VHDM® 6 Row Right Angle Male Joiner 74039-2008 VHDM® Joiner For EMC 74039-2108 VHDM® 6 Row 8mm Die Cast 74039-5008 HSD 5 Row 8mm Ground 74039-5010 HSD 5 Row 10mm Joiner 74039-5011 HSD 5 Row 10mm Joiner 74039-5208 HSD 5 Row 8mm Die Cast Guide Module 74039-5218 HSD 5 Row 8mm Die Cast Guide Module 74039-5228 HSD 5 Row 8mm Die Cast Guide Module 74039-5238 HSD 5 Row 8mm Die Cast Guide Module 74039-5248 HSD 5 Row 8mm Die Cast Guide Module 74039-5258 HSD 5 Row 8mm Die Cast Guide Module 74039-5268 HSD 5 Row 8mm Die Cast Guide Module 74039-5278 HSD 5 Row 8mm Die Cast Guide Module 74039-5288 HSD 5 Row 8mm Die Cast Guide Module 74039-5308 HSD 5 Row Die cast Guide Module 74039-5318 HSD 5 Row Die cast Guide Module 74039-5328 HSD 5 Row Die cast Guide Module 74039-5338 HSD 5 Row Die cast Guide Module 74039-5348 HSD 5 Row Die cast Guide Module 74039-5358 HSD 5 Row Die cast Guide Module Doc No: ATS-621003800 Revision: B Release Date: 02-12-03 Revision Date: 05-24-06 Order No. Description 74039-5368 HSD 5 Row Die cast Guide Module 74039-5378 HSD 5 Row Die cast Guide Module 74039-5388 HSD 5 Row Die cast Guide Module 74039-5908 HSD 5 Row 8mm Ground Module 74039-5909 HSD 5 Row 8mm Ground Module 74039-6006 VHDM®6 Row 6mm Joiner 74039-6008 VHDM/HSD Guide/Ground Die Cast 74039-6010 VHDM® 6 Row 10mm Joiner 74039-6011 VHDM® 6 Row 10mm Joiner 74039-6014 VHDM® DC 6 Row 14mm Joiner 74039-6015 VHDM® 6 Row 14mm Joiner 74039-6110 VHDM® 6 Row 10mm Joiner 74039-6111 VHDM 6Row 10mm Joiner 74039-6210 VHDM® 6 Row 10mm Joiner 74039-6211 VHDM® 6 Row 10mm Joiner 74039-6506 VHDM® 6 Row 6mm Ground 74039-6606 VHDM® 6 Row Joiner/Ground Module 74039-6806 VHDM® 6 Row 6mm Ground Module 74039-6906 VHDM® 6 Row 6mm Ground Assy 74039-6908 VHDM/HSD 6 Row 8mm Ground Assy 74039-8006 VHDM® 8 Row 6mm Joiner/Ground Module 74039-8010 VHDM® DC Joiner 8 Row 10mm 74039-8011 VHDM® 8 Row Joiner 74039-8014 VHDM® 8 Row 14mm Joiner 74039-8015 VHDM® 8 Row 14mm Joiner 74039-8506 VHDM® 8 Row 6mm Joiner/Ground Module 74039-8606 VHDM® 8 Row Joiner/Ground Module 74039-8708 VHDM® 8 Row DC Self Ground Module UNCONTROLLED COPY Page 1 of 3 HSD/VHDM Tooling Order No. 74039-8808 74039-8906 74039-8907 *HDM® is a registered trademark of Teradyne, Inc. Description VHDM® 8 Row DC Self Ground Module VHDM® 8 Row 6mm Ground Assy VHDM® 8 Row 6mm Ground Module Order No. 74039-8908 74039-8978 Description VHDM® 8 Row 8mm Ground Assy VHDM® 8 Row 8mm Ground Assy Description: The VHDM® and *HDM® Joiner / Ground Insertion Tool is a simple pliers type tool for loading HDM® joiner and ground modules (73773 Series) or VHDM® joiner/ground modules (74039- Series) into stiffener rails. It measures approximately 203mm (8 in.) long by 76mm (3 in.) wide (closed) by 25mm (1 in.) thick and weighs .48 kg (1 lb). OPERATION: For Short and Medium Length HDM® and VHDM® Modules Assemblies: 1. Place the desired joiner or ground module into the proper location on the HDM® or VHDM® stiffener. 2. Squeezing lightly with your fingers, press into position. 3. Position the Insertion Tool over the module and stiffener assembly with the long jaw of the tool over the module and the short jaw over the stiffener. See Figure 1. 4. Squeeze the grips of the insertion tool firmly until the module is completely seated. 5. See the VHDM® and VHDM-HSD Operation Manual (Order No. TM-622010999), for additional information and repair tools. LONG JAW OVER MODULE SHORT JAW OVER STIFFENER JOINER/GROUND MODULE STIFFENER WAFERS STIFFENER Figure 1 PC BOARD For Longer VHDM® Modules Assemblies: 1. Locate the desired joiner or ground module into the proper location on the HDM® or VHDM® stiffener. 2. Squeezing lightly with your fingers, press into position. 3. Position the Insertion Tool over the module and stiffener assembly with the long jaw of the tool against the back of the stiffener and the short jaw against the top portion of the module where it attaches to the stiffener. See Figure 1. Doc No: ATS-621003800 Revision: B Release Date: 02-12-03 Revision Date: 05-24-06 UNCONTROLLED COPY Page 2 of 3 HSD/VHDM Tooling 4. Keeping the tool parallel to the assembly, squeeze the grips of the insertion tool firmly to seat the module. 5. See the VHDM® and VHDM-HSD Operation Manual (Order No. TM-622010999), for additional information and repair tools. Maintenance It is recommended that each operator of the tool be made aware of, and responsible for, the following maintenance steps: 1. Remove dust, moisture, and other contaminants with a clean brush, or soft, lint free cloth. 2. Do not use any abrasive materials that could damage the tool. 3. Make certain all pins; pivot points and bearing surfaces are protected with a thin coat of high quality machine oil. Do not oil excessively. 4. When tool is not in use, store in a clean, dry area. 5. There are no repair parts available for this tool. Should the tool be damaged a new tool is required. CAUTION: Molex specifications are valid only when used with Molex connectors and tooling. Contact Information For more information on Molex application tooling please contact Molex at 1-800-786-6539. Visit our Web site at http://www.molex.com Doc No.: ATS-621003800 Revision: B Release Date: 02-12-03 Revision Date: 11-05-12 UNCONTROLLED COPY Page 3 of 3