Crimp Adapter for DIN style Crimp Dies
Crimp Adapter
For DIN style dies
In Pneumatic
Application Tooling
Crimp Machine
Specification Sheet
Order No. 63801-8901
Features
The Quick Change Crimp Adapter allows crimp die kits to be easily installed into the bench
mounted pneumatic crimp machine UP 60.
Powered crimp capabilities help reduce fatigue and discomfort from repetitive manual crimping.
Scope
The 63801-8901 Crimp Adapter was created for use with the DIN style square crimp dies when used with the
Universal Pneumatic Crimp Machine UP 60. (Order No. 63801-8900).
Installation
To install the dies in the Crimp Adapter and the Crimp Adapter into the Universal Pneumatic Crimp Machine
UP 60, refer to the Instruction Manual TM-638018900, Section 9 Adapters.
Maintenance
It is recommended that each operator of the tool be made aware of, and responsible for, the following
maintenance steps:
Doc No: ATS-638018901
Release Date: 05-22-13
Revision: A
Revision Date: 05-22-13
UNCONTROLLED COPY
Page 1 of 4
Crimp Adapter for DIN style Crimp Dies
1. Remove dust, moisture and other contaminants with a clean brush, or soft, lint-free cloth.
2. Do not use any abrasive materials that could damage the tool.
3. Make certain the pins are protected with a thin coat of high quality machine oil. Do not oil excessively. This
tool was engineered for durability, but like any fine piece of equipment, it needs cleaning and lubrication for
a maximum service life of trouble-free crimping. The use of a light oil, such as SAE 30 weight automotive oil,
every 5,000 crimps or monthly, will significantly enhance the tool life and ensure a stable calibration.
4. Store the tool in a clean and dry area when not in use.
Warranty
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All
vital components are long life-tested. All tools are warranted free of manufacturing defects for a period of
30 days. Should such a defect occur, we will repair or exchange the tool free of charge. This repair or
exchange will not be applicable to alter, misused, or damaged tools.
Doc No: ATS-638018901
Release Date: 05-22-13
Revision: A
Revision Date: 05-22-13
UNCONTROLLED COPY
Page 2 of 4
Crimp Adapter for DIN style Crimp Dies
Crimp Adapter Parts List
Item Number Order Number
Description
Quantity
1
63801-8901 Crimp Adapter for DIN Square Dies with Safety Guard
1
2
63801-8991
0
Safety Guard
1
2
1
Figure 1
Doc No: ATS-638018901
Release Date: 05-22-13
Revision: A
Revision Date: 05-22-13
UNCONTROLLED COPY
Page 3 of 4
Crimp Adapter for DIN style Crimp Dies
Contact Information
For more information on Molex application tooling please contact Molex at 1-800-786-6539.
Visit our Web site at http://www.molex.com
Doc No: ATS-638018901
Release Date: 05-22-13
Revision: A
Revision Date: 05-22-13
UNCONTROLLED COPY
Page 4 of 4
很抱歉,暂时无法提供与“0638018901”相匹配的价格&库存,您可以联系我们找货
免费人工找货