0638171200

Manual Wire Stripper Tool Manual Wire Stripper Application Tooling Specification Sheet Order No. 63817-1200 FEATURES     Stripping cassettes are available for stripping multiple wire sizes in one tool Provides the widest stripping capacity of any tool of its type in the industry, which will reduce overall tooling investments and provide production flexibility Designed with fine adjustability to ensure that thin insulations can be stripped without damage to conductors Built-in wire cutter DESCRIPTION This wire stripper is designed for conduit wire, flex power cable, equipment wire and flat phone cable. Wire range is 10.00-0.05 mm2 (8-34 AWG) in diameter and insulation thickness 1.00mm (.040”) maximum. This cutting and stripping tool has easily interchangeable multiple stripping cassettes that enable precision stripping of a wide range of insulations from PVC to PTFE with just one tool. Although the tool is self-adjusting, 90% of wires can be stripped without adjusting the tool. Lightweight and ergonomically designed, this tool is qualified for high-volume production and portable field usage. SPECIFICATIONS Stripping dimension: 1.00mm (.040”) maximum thick insulation Cables: Power cable, multi-conductor control, fiber optic and copper trunk cables Cable Types: Conduit wire, flex power cable, equipment wire and flat phone cable Wire Range: 10.00-0.05 mm2 (8-34 AWG) Cycle Life: 150,000 + (on handle) cycle life WARNING Do not strip live circuits! Mechanical Dimensions Danger of electric shock. Length: 108 mm (4.3”) Height: 174 mm (6.9”) Weight: 136 g (4.8oz) Wear safety glasses to avoid eye injury WARNING: Make sure the cable is disconnected from any power supply. Doc No: 638171200 Revision: A Release Date: 03-06-18 Revision Date: 03-06-18 UNCONTROLLED COPY Page 1 of 3 Manual Wire Stripper Tool OPERATION Follow the steps below for stripping the wire or cable: CAUTION: Always keep hands and fingers out of the cutting area! 1. Squeeze the sides of the wire stop to adjust the strip length. 3. Adjust the stripping blades for the insulation thickness. 2. Position the wire stop to the strip length desired. 5. Squeeze the tool handles together to strip the wire. 6. For strip lengths over 18mm, move the wire stop all the way to the back and bend the excess wire outside the tool. 4. Place the wire against the wire stop. 7. Squeeze the tool handles together to strip the wire. Wire Cutting Function 1. Place the wire in the opening of the cutter. 2. Squeeze the tool handles together to cut the wire. WARNING: For Wire Cutter Only Do not use this tool to cut hardened objects. Follow the steps below for changing the stripping cassette: Doc No: 638171200 Revision: A Release Date: 03-06-18 Revision Date: 03-06-18 UNCONTROLLED COPY Page 2 of 3 Manual Wire Stripper Tool 1. Adjust the stripper blade to the + position. 3. The cassette is removed from 2. Hold the tool shut and slide the side of the tool. the wire stop forward. 4. Align the hole of the new cassette with the pivot pin in the tool. 5. Push the new cassette fully into the tool. Maintenance It is recommended that each operator of the tool be made aware of and responsible for the following maintenance steps: 1. Remove dust, moisture and other debris with a clean brush or a soft, lintfree cloth. 2. Do not use any abrasive materials that could damage the tool. 3. Lubricate every 10,000 cycles. 4. Make sure the blade is cleaned of debris. 5. When the tool is not in use, store it in a clean, dry area. Warranty This tool is for stripping and cutting electrical cable only. All tools are warranted to be free of manufacturing defects for a period of 30 days. Should such a defect occur, the tool will be exchanged free of charge. This exchange will not be applicable to altered, misused or damaged tools. This tool is designed for hand use only. Any alteration to the tool voids this warranty. ORDERING INFORMATION Order No. 63817-1200 63817-0070 63817-0071 63817-0072 Description Notes Complete Manual Wire Stripping Tool with “V” Blade ♦ Straight Blade Replacement Cassette 8-34 AWG Used with PVC Insulation “V” Blade Replacement Cassette 12-28 AWG Used with PTFE Insulation Straight Blade Replacement Cassette 5-10 AWG Used with PVC Insulation ♦This tool comes complete with the “V” blade. To use the straight blade, order the complete tool with “V” blade (63817-1200) plus the straight blade (63817-0070), and replace the stripping cassette. Application Tooling Support Phone: +1-402-458-TOOL (8665) E-Mail: applicationtooling@molex.com Website: www.molex.com/applicationtooling Molex is a registered trademark of Molex, LLC in the United States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners. Doc No: 638171200 Revision: A Release Date: 03-06-18 Revision Date: 03-06-18 UNCONTROLLED COPY Page 3 of 3