0675031230

10 9 7 8 5 6 4 3 2 1 F F 3.20 REF. 0.80 PITCH NOTES: 1. MATERIAL: HOUSING: HIGH TEMPERATURE THERMAL PLASTIC, BLACK, UL94V-0 TERMINAL: COPPER ALLOY, THICKNESS = 0.2MM SHIELD CASE: COPPER ALLOY, THICKNESS = 0.4MM 2. PLATING: TERMINAL: CONTACT AREA: GOLD 0.75 MICROMETER MINIMUM. SOLDER TAIL AREA: PURE TIN 3.8 MICROMETER MINIMUM. UNDER PLATING: NICKEL 1.25 MICROMETER MINIMUM. SHIELD CASE: PURE TIN 1~3 MICROMETER PLATING. UNDER PLATING: NICKEL 1.0 MICROMETER MINIMUM. 3. TAIL & NAIL COPLANARITY 0.1mm MAXIMUM. 4. PRODUCT SPECIFICATION REFER TO PS-67803-001. 5. PACKAGING INFORMATION REFER TO PK-67503-001. 0.35 COVER TAPE 1.50 E 4.25 6.00 REF. 2.00 E 3.00 D D SHIELD CASE P.C.B EDGE 0.70 REF 4.25 ±0.05 4.00 ±0.05 7.70 3.50 ±0.05 6.90 2.00 REF. 3.20 REF TERMINAL 9.00 0.80 PITCH C PIN 1 VBUS DD+ ID GND 7.80 ±0.05 6.20 ±0.10 1 2 3 4 0.50 ±0.05 3.95 5 C 0.80 ±0.05 PIN 5 2.05 ±0.05 PATTERN RESTRICTED AREA 1.20 ±0.10 5.87 HOUSING B 2.25 ±0.05 CONN. OUTLINE B 3.10 ±0.05 RECOMMENDED P.C.B. PATTERN LAYOUT THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A PART NUMBER 67503-1230 DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 10 P1 RELEASE DATE 9 2021/05/26 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 3.0 ° 0.25 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:07:28 8 ANGULAR TOL 7 6 5 4 EC NO: 644146 DRWN: PRADEA CHK'D: AYIN APPR: AYIN INITIAL REVISION: DRWN: LXWANG APPR: YTYAP THIRD ANGLE PROJECTION 2020/10/05 2021/05/26 2021/05/26 USB SERIES MINI-B REC. REC. ASS'Y FOR SMT W/O BACKOVER&PEG(LEAD-FREE) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/01/04 2005/01/05 DRAWING SERIES A3-SIZE 67503 3 SD-67503-011 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C SHEET NUMBER 1 OF 1 1 A