0678408001

10 9 7 8 5 6 4 3 2 1 NOTES: F CENTER OF CARD 2.50X7=17.50 1.625 PITCH F 1.TERMINAL AND NAIL COPLANARITY TO BE 0.1 MAX. 2.WHEN DELIVERING, THE PUSH/PUSH MECHANISM PITCH IS IN THE STATE OF THE UNLOCK.(CARD DASHING OUT POSITION) 3.CARD READ ONLY BY THE TIME THE CARD DETECTION 24.20REF. E CARD SLOT 1.80 STAND OFF 2.80 SWITCH WORKS. 4.OPENING AND CLOSE OF EACH SWITCH. STATUS 28.10 1 22.70 5.85 CL 4.20 11.90 10.80 ⌀1.20 11.90 0.50 2.00 10.50 CARD DASHING OUT POSITION CARD LOCK POSITION 6.00±0.30 5.00 1.20 CARD PUSHING POSITION 10 13.55 30.50 C 11 7 6 8 CARD CENTER DATE CODE WRITE PROTECT WRITE ENABLE E POSITION POSITION CARD UNINSERTION OPEN OPEN OPEN CARD HALF INSERTION CLOSE CLOSE OPEN CARD INSERTION OPEN CLOSE CLOSE NO 1 2 3 4 5 6 7 NAME HOUSING HEART CAM TERMIANL METAL SHELL PIN SPRING PROTECT TERMINAL 8 PROTECT AND DETECT TERMINAL 1 COPPER ALLOY, SELECTIVE Au PLATING 9 10 11 DETECT TERMINAL NAIL CARD LOCK 1 2 1 COPPER ALLOY, SELECTIVE Au PLATING COPPER ALLOY, PURE TIN PLATING STAINLESS STEEL QT'Y 1 1 9 1 1 1 1 MATERIAL LCP,UL 94V-0;COLOR:BLACK LCP,UL 94V-0;COLOR:BLACK COPPER ALLOY;SELECTIVE Au PLATING STAINLESS STEEL STAINLESS STEEL STEEL WIRE COPPER ALLOY, SELECTIVE Au PLATING D C 6. PRODUCT SPECIFICATION : PER PS-67840-001 7. I/O CONTACTS, BASE ON SD I/O ASSOC. REV. G. 8. THIS HAS A LOCK MECHANISM FOR SD CARD.IT DOES NOT WORK FOR THE MMC. CARD AT LOCK POSITION, IF PULLED OUT MANUALLY. THE NEXT CARD INSERTED WILL BE EJECTED. 9. RECOMMENED P.C.BOARD THICKNESS: 0.8±0.1 10. PACKAGING REFERS TO PK-67840-001 2 9 DETECT SWITCH 5.MATERIAL AND FINISH AS BELOW 4 5 D WRITE PROTECT SWITCH CARD INSERTION 3 B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2019/01/23 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 3.0 ° 0.25 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 09:49:20 8 ± 7 6 5 4 EC NO: 610059 DRWN: MGLEI CHK'D: XQZHANG APPR: XQZHANG INITIAL REVISION: DRWN: QLZHANG APPR: YTYAP THIRD ANGLE PROJECTION 2019/01/02 2019/01/23 2019/01/23 SD MEMORY CARD CONN. ASS'Y(TOP MOUNT TYPE 1.8 MM STAND OFF, LEAD-FREE) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/01/27 2005/01/28 DRAWING SERIES A3-SIZE 67840 3 SD-67840-007 MATERIAL NUMBER PSD 001 CUSTOMER 678408001 GENERAL MARKET 2 C SHEET NUMBER 1 OF 3 1 A 10 9 7 8 5 6 4 2 1 27.80±0.05 23.80±0.03 21.40±0.05 I/O GROUDING 13.60±0.05 2.70±0.10 0.60±0.05 TYP. 11.30±0.05 11.30±0.05 1.65±0.10 F 2.10±0.10 1.35±0.10 THROUGH HOLE CARD CENTER TAN.R TYP. 14.25±0.05 10.70±0.05 11.80±0.05 CARD CENTER TYP.2 14.42±0.05 2.80±0.10 10.20±0.05 12.65±0.05 1.65±0.10 12.60±0.05 11.45±0.05 D 1.70±0.10 3.20±0.10 2.10±0.10 E 6.30±0.05 6.30±0.05 17.60±0.05 1.00±0.10 16.50±0.05 14.22±0.05 OUTLINE C 1.30±0.10 14.20±0.05 24.25±0.10 PROTECT AND DETECT SWITCH 12.80±0.05 1.10±0.05 TYP.9 15.35±0.05 2.10±0.10 2.40±0.05 TYP. 2.60±0.10 2.30±0.10 DETECT SWITCH CONNECTOR PIN NO.8 PIN NO.7 PIN NO.6 PIN NO.5 PIN NO.4 PIN NO.3 PIN NO.2 PIN NO.1 PIN NO.9 3.00±0.10 18.00±0.05 1.40±0.10 C PROTECT SWITCH 1.60±0.10 2.00±0.05 10.55±0.05 17.05±0.05 D CL 9.30±0.05 ⌀1.36±0.03 HOLE TYP.2 TYP. 1.10±0.10 1.65±0.10 1.35±0.10 19.65±0.05 F E 3 1.60±0.10 2.00±0.10 STAND OFF AREA FOR PATTERN PROHIBITION 14.35±0.05 9.375 B B 7 X 2.50= 17.50 1.625 PITCH THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION RECOMMENDED PCB PATTERN LAYOUT DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2019/01/23 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 3.0 ° 0.25 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 09:49:20 8 ± 7 6 5 4 EC NO: 610059 DRWN: MGLEI CHK'D: XQZHANG APPR: XQZHANG INITIAL REVISION: DRWN: QLZHANG APPR: YTYAP THIRD ANGLE PROJECTION 2019/01/02 2019/01/23 2019/01/23 SD MEMORY CARD CONN. ASS'Y(TOP MOUNT TYPE 1.8 MM STAND OFF, LEAD-FREE) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/01/27 2005/01/28 DRAWING SERIES A3-SIZE 67840 3 SD-67840-007 MATERIAL NUMBER PSD 001 CUSTOMER 678408001 GENERAL MARKET 2 C SHEET NUMBER 2 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 F F PULL OUT DIRECTION NOTES: (2.5) 0° 12 (⌀100) 1. NUMBER OF CONNECTORS: 250 PCS/REEL 21 25±10.00 TOP TAPE NON-BONDED PART (⌀380) E 2. 20~40 PCS TOP TAPE BONDED PART (EMPTY) E PULL OUT DIRECTION 13 (44.4) (2.1) D TAIL PART COMPONENT TOP TAPE LEADER PART 500MIN. ESCARGOT REEL SUPPLIER (EMPTY) D 360±36.00 3. PEEL-OFF FOCE OF TOP TAPE: 0.1~1.3N (10.2~130gf) 44 WIDTH TAPE (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE.) (PEEL-OFF SPEED:300mm/min REF) PEEL OFF DIRECTION B 44.00±0.30 40.40 (20.20) PULL OUT DIRECTION PULL OUT DIRECTION 1.75±0.10 40.00 C 10° C B DIRECTION OF CONNECTOR IN EMBOSSED TAPE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2019/01/23 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 3.0 ° 0.25 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 09:49:20 8 ± 7 6 5 4 EC NO: 610059 DRWN: MGLEI CHK'D: XQZHANG APPR: XQZHANG INITIAL REVISION: DRWN: QLZHANG APPR: YTYAP THIRD ANGLE PROJECTION 2019/01/02 2019/01/23 2019/01/23 SD MEMORY CARD CONN. ASS'Y(TOP MOUNT TYPE 1.8 MM STAND OFF, LEAD-FREE) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/01/27 2005/01/28 DRAWING SERIES A3-SIZE 67840 3 SD-67840-007 MATERIAL NUMBER PSD 001 CUSTOMER 678408001 GENERAL MARKET 2 C SHEET NUMBER 3 OF 3 1 A