0700581096

10 9 7 8 6 5 1.32 E 1.52 3 2 1 NOTES: 1. MATERIAL: PHOSPHOR BRONZE 2. PLATING: 124 = SELECT BRIGHT TIN: 3.75 MICROMETERS MIN OVER NICKEL 207 = SELECT HARD GOLD: 0.38 MICROMETERS MIN. SELECT TIN: 2.0 MICROMETERS MIN BOTH OVER NICKEL 206 = SELECT HARD GOLD: 0.75 MICROMETERS MIN. SELECT TIN: 2.0 MICROMETERS MIN BOTH OVER NICKEL P124 = PREPLATED OVERALL BRIGHT TIN: 3.75 MICROMETERS MIN OVER NICKEL (MAY HAVE UNPLATED EDGES) 3. PRODUCT SPECIFICATION: TERMINALS CONFORM TO PS-70058 AND PS-70400 WHEN CRIMPED WITH MOLEX CRIMP TOOLS. 4. COSMETIC SPECIFICATION: PS-45499-002 CLASS B 5. TERMINAL FOR USE WITH HOUSING SERIES 70066 AND 70450 6. WIRE SPECIFICATION: TERMINALS STAMPED WITH THE LETTER: A = ACCEPTS 24-30 AWG STRANDED WIRE WITH A 1.52 MAX INSULATION DIA B = ACCEPTS 32-36 AWG STRANDED WIRE WITH A 0.64 MAX INSULATION DIA. C = ACCEPTS 22-24 AWG STRANDED WIRE WITH A 1.63 MAX INSULATION DIA 12.88 F 4 2.18 ±0.10 0.08 MAX F E CARRIER CUTOFF D D TERMINALS STAMPED WITH THE LETTER "A" ACCEPT 24-30 AWG WIRE WITH A 1.52 MAX INSULATION DIA. TERMINALS ON THIS SHEET ARE FOR USE WITH 24-30 AWG WIRE. SEE SHEETS 2 FOR OTHER WIRE SIZES C C MATERIAL NO: PACKAGING 70058-1069 REEL 70058-1096 LOOSE 70058-0082 REEL WIRE SIZE PLATING SEE NOTE 2 MAX INSULATION DIA B B 70058-0097 A LOOSE REEL 70058-0083 DOCUMENT STATUS FORMAT: master-tb-prod-B REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 124 SELECT TIN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 24-30 AWG 207 0.38 GOLD SCALE mm 8:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± ° 2 PLACES ± 0.15 1 PLACE ± 0.25 0 PLACES ± 0.0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:25:01 8 7 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#511695. GENERAL TOLERANCES (UNLESS SPECIFIED) 1.52 DIA MAX 206 0.75 GOLD 2023/01/04 DIMENSION UNITS 6 5 4 SL CRIMP TERMINAL EC NO: 730178 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: KSAMIEC APPR: FSMITH THIRD ANGLE PROJECTION 3 2022/12/02 2023/01/04 2023/01/04 (24-30 AWG WIRE) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/05/03 2017/06/16 DRAWING SERIES B-SIZE 70058 700580000-SD MATERIAL NUMBER SEE TABLE 2 PSD 000 CUSTOMER GENERAL MARKET B3 SHEET NUMBER 1 OF 3 1 A 10 9 7 8 6 5 1.32 E 1.52 3 2 1 NOTES: 1. MATERIAL: PHOSPHOR BRONZE 2. PLATING: 124 = SELECT BRIGHT TIN: 3.75 MICROMETERS MIN OVER NICKEL 207 = SELECT HARD GOLD: 0.38 MICROMETERS MIN. SELECT TIN: 2.0 MICROMETERS MIN BOTH OVER NICKEL 206 = SELECT HARD GOLD: 0.75 MICROMETERS MIN. SELECT TIN: 2.0 MICROMETERS MIN BOTH OVER NICKEL P124 = PREPLATED OVERALL BRIGHT TIN: 3.75 MICROMETERS MIN OVER NICKEL (MAY HAVE UNPLATED EDGES) 3. PRODUCT SPECIFICATION: TERMINALS CONFORM TO PS-70058 AND PS-70400 WHEN CRIMPED WITH MOLEX CRIMP TOOLS. 4. COSMETIC SPECIFICATION: PS-45499-002 CLASS B 5. TERMINAL FOR USE WITH HOUSING SERIES 70066 AND 70450 6. WIRE SPECIFICATION: TERMINALS STAMPED WITH THE LETTER: A = ACCEPTS 24-30 AWG STRANDED WIRE WITH A 1.52 MAX INSULATION DIA B = ACCEPTS 32-36 AWG STRANDED WIRE WITH A 0.64 MAX INSULATION DIA. C = ACCEPTS 22-24 AWG STRANDED WIRE WITH A 1.63 MAX INSULATION DIA 12.88 F 4 2.18 ±0.10 0.08 MAX F E C CARRIER CUTOFF D D TERMINALS STAMPED WITH THE LETTER "C" ACCEPT 22-24 AWG WIRE WITH A 1.63 MAX INSULATION DIA C MATERIAL NO: PACKAGING 70058-1086 REEL 70058-0086 REEL 70058-0087 REEL B 70058-0103 A C TERMINALS ON THIS SHEET ARE FOR USE WITH 22-24 AWG WIRE. SEE SHEETS 1 FOR OTHER WIRE SIZES LOOSE REEL 70058-0088 DOCUMENT STATUS FORMAT: master-tb-prod-B REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 PLATING SEE NOTE 2 WIRE SIZE MAX INSULATION DIA B 124 SELECT TIN P124 OVERALL TIN 207 0.38 GOLD THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 22-24 AWG SCALE mm 8:1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± ° 0.15 1 PLACE ± 0.25 0 PLACES ± 0.0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:25:01 8 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#511695. GENERAL TOLERANCES (UNLESS SPECIFIED) 1.63 DIA MAX 206 0.75 GOLD 2023/01/04 DIMENSION UNITS 7 6 5 4 SL CRIMP TERMINAL EC NO: 730178 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: KSAMIEC APPR: FSMITH THIRD ANGLE PROJECTION 3 2022/12/02 2023/01/04 2023/01/04 (22-24 AWG WIRE) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/05/03 2017/06/16 DRAWING SERIES B-SIZE 70058 700580000-SD MATERIAL NUMBER SEE TABLE 2 PSD 000 CUSTOMER GENERAL MARKET B3 SHEET NUMBER 2 OF 3 1 A 10 9 8 7 6 5 4 3 LOOSE PACKED F 2 1 REEL PACKED WHEN TERMINALS ARE FULLY INSERTED INTO THE HOUSINGS. F PARTS PER BAG: 10,000 BAGS PER BOX: 2 PARTS PER BOX: 20,000 THE TERMINAL'S LOCKING TANG SHOULD BE VISABLE IN THE HOUSING'S WINDOWS A UNWINDING DIRECT TO CRIMP MACHINE E E PARTS PER REEL: 20,000 REELS PER BOX: 3 PARTS PER BOX: 60,000 D D A HOUSING WINDOWS C C TERMINAL LOCKING TANGS B B SECTION A-A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION A FORMAT: master-tb-prod-B REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2023/01/04 SCALE mm 1:15 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± ° 0.15 1 PLACE ± 0.25 0 PLACES ± 0.0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:25:01 8 7 6 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#511695. GENERAL TOLERANCES (UNLESS SPECIFIED) CRIMPED TERMINALS SHOULD BE INSERTED INTO THE HOUSING IN THIS DIRECTION WITH THE LOCKING TANGS FACING UP TOWARD THE HOUSING WINDOWS DOCUMENT STATUS DIMENSION UNITS 5 4 SL CRIMP TERMINAL EC NO: 730178 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: KSAMIEC APPR: FSMITH THIRD ANGLE PROJECTION 3 2022/12/02 2023/01/04 2023/01/04 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/05/03 2017/06/16 DRAWING SERIES B-SIZE 70058 700580000-SD MATERIAL NUMBER SEE TABLE 2 PSD 000 CUSTOMER GENERAL MARKET B3 SHEET NUMBER 3 OF 3 1 A