0714362264

12 11 10 9 7 8 5 6 4 3 2 CIRCUIT DIM.A DIM.B DIM.C DIM.D SIZE A B H X 0.35 ⌖ 0.20 X 1.00 5.60 ±0.20 5.14 G 4.21 6.10 1.00 SEE NOTE 7 8.79 C SEE NOTE 10 6.60 F 8.35 1.05 E ⌀ 1.20 D SEE NOTE 6 0.75 B ±0.04 A 1 20 13.90 9.00 12.58 12.40 H 30 18.90 14.00 17.58 17.40 40 23.90 19.00 22.58 22.40 50 28.90 24.00 27.58 27.40 60 33.90 29.00 32.58 32.40 64 35.90 31.00 34.58 34.40 70 38.90 34.00 37.58 37.40 G 80 43.90 39.00 42.58 42.40 84 45.90 41.00 44.58 44.40 90 48.90 44.00 47.58 47.40 100 53.90 49.00 52.58 52.40 110 58.90 54.00 57.58 57.40 F 120 63.90 59.00 62.58 62.40 +0.13 TOP OF HOUSING -0.18 TO SEATING PLANE +0.31 -0.26 E NOTES 1.00 1. HOUSING MATERIAL: G.F. THERMOPLASTIC; UL RATING: 94V-0; COLOR: WHITE OR BLACK TERMINAL MATERIAL: PHOSPHOR BRONZE; 0.205 THICK. VACUUM CAP MATERIAL: STAINLESS STEEL; 0.255 THICK. 2. PLATING FINISHES: SEE SHEET 2. 3. THIS PART, WHEN MATED WITH MOLEX 1.0mm RECEPTACLE CONNECTOR SERIES 71439, CONFORMS TO MOLEX PRODUCT SPECIFICATION PS-71436-9999. REFER TO TABLE ON SHEET 2 FOR MATED STACK HEIGHTS FOR THIS PLUG. 4. PACKAGING SPECIFICATIONS: REFER TO TABLE ON SHEET 2. 5. PEGS ARE OPTIONAL. REFER TO TABLE ON SHEET 2. 6. VACUUM PICK & PLACE CAP OPTIONAL. REFER TO TABLE ON SHEET 2. 7. THIS PART CONFORMS TO EIA STANDARD 700 AAB FOR 1.0mm TWO-PART CONNECTORS FOR USE WITH PARALLEL PRINTED BOARDS. 8. COPLANARITY OF SMT TAILS: 0.10 MAX. 9. 64-CIRCUIT PLUG ASSEMBLY WITH PEGS AND VACUUM CAP SHOWN FOR ILLUSTRATION PURPOSES ONLY. 10. DATE CODE STAMP IS WEEK, YEAR LOCATED APPROXIMATELY WHERE SHOWN. D 6.00 ±0.05 2.30 MINIMUM 0.60 ±0.05 ⌖ 0.08 A C B 0.60 ±0.05 ⌖ 0.08 A ⌀1.40 ±0.03 1.00 2 PLS. D C ⌖ 0.10 B 6.00 ±0.05 B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION B D ±0.05 A 2.30 MINIMUM RECOMMENDED PCB THICKNESS: 1.00±0.10 MINIMUM DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 11 2019/02/01 10 SCALE mm 4:1 CURRENT REV DESC: REDRAWN IN NX GENERAL TOLERANCES (UNLESS SPECIFIED) RECOMMENDED PCB LAYOUT (WITH AND WITHOUT PEGS) A DIMENSION UNITS ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:16:40 9 8 7 6 5 EC NO: 610884 DRWN: TTAO03 CHK'D: JKACHLIC APPR: JKACHLIC INITIAL REVISION: DRWN: REED APPR: BIXLER THIRD ANGLE PROJECTION 4 2019/01/23 2019/02/01 2019/02/01 SALES ASSY, 1.0MM BOARD TO BOARD PLUG CONNECTOR 4.30 STACK HEIGHT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1995/04/03 1995/04/03 DRAWING SERIES C-SIZE 71436 3 714362000 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 A1 SHEET NUMBER 1 OF 2 1 A 12 11 10 9 7 8 5 6 4 3 2 1 WHITE (NATURAL) MATERIAL H H CIRCUIT SIZE PLUG ASSY. PART NUMBER PEGS CONTACT PLATING SEE PLATING NOTES PICK & PLACE CAP PACKAGING SPEC. NUMBER PACKAGING TYPE 64 71436-2164 YES 30 GOLD NO PK-70873-0607 TUBE 64 71436-2364 YES 30 GOLD YES PK-70873-0607 TUBE 64 71436-2464 YES 30 GOLD YES PK-70873-063 TAPE & REEL 64 71436-2564 NO 30 GOLD NO PK-70873-0606 TUBE 64 71436-2764 NO 30 GOLD YES PK-70873-0606 TUBE 64 71436-2864 NO 30 GOLD YES PK-70873-063 TAPE & REEL 64 71436-2264 NO 50 GOLD YES PK-70873-063 TAPE & REEL 64 71436-2664 YES 50 GOLD NO PK-70873-0607 TUBE 64 71436-2064 NO 50 GOLD NO PK-70873-0606 TUBE G F G F BLACK MATERIAL WITH PICK & PLACE CAP CIRCUIT SIZE PLUG ASSY. PART NUMBER PEGS CONTACT PLATING SEE PLATING NOTES PICK & PLACE CAP PACKAGING SPEC. NUMBER PACKAGING TYPE 64 71436-2964 NO 30 GOLD YES PK-70873-063 TAPE & REEL E E RECOMMENDED PLUG/RECEPTACLE COMBINATION FOR MATED STACK HEIGHT PER EIA STANDARD 700 AAAB MATED STACK HEIGHT RECEPTACLE HEIGHT RECEPTACLE SERIES NO. PLUG HEIGHT PLUG SERIES NO. 10.00 12.00 13.00 15.00 5.30 7.30 8.30 10.30 71439-0*** 71439-1*** 71439-2*** 71439-3*** 4.30 71436-2*** D D PLATING PER ES-88 PRINTED CIRCUIT BOARD PLUG STACK HEIGHT + RECEPTACLE STACK HEIGHT + 0.40 (SOLDER PASTE ALLOWANCE) = MATED STACK HEIGHT PLUG CONNECTOR C 30 GOLD - 0.76 MICROMETERS MINIMUM GOLD IN CONTACT AREA AND 1.91 MICOMETERS MINIMUM MATTE TIN IN PC TAIL AREA OVER 1.27 MICROMETERS MINIMUM PLATING OVERALL. P C 50 GOLD - 1.27 MICROMETERS MINIMUM GOLD IN CONTACT AREA AND 1.91 MICOMETERS MINIMUM MATTE TIN IN PC TAIL AREA OVER 1.27 MICROMETERS MINIMUM PLATING OVERALL. BOTTOMING SURFACE H R B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION P = PLUG STACK HEIGHT R = RECEPTACLE STACK HEIGHT H = MATED STACK HEIGHT PRINTED CIRCUIT BOARD A DOCUMENT STATUS 12 P1 RELEASE DATE 11 2019/02/01 10 SCALE mm --- ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:16:40 9 8 7 CURRENT REV DESC: REDRAWN IN NX GENERAL TOLERANCES (UNLESS SPECIFIED) RECEPTACLE CONNECTOR FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 DIMENSION UNITS 6 5 EC NO: 610884 DRWN: TTAO03 CHK'D: JKACHLIC APPR: JKACHLIC INITIAL REVISION: DRWN: REED APPR: BIXLER THIRD ANGLE PROJECTION 4 2019/01/23 2019/02/01 2019/02/01 SALES ASSY, 1.0MM BOARD TO BOARD PLUG CONNECTOR 4.30 STACK HEIGHT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1995/04/03 1995/04/03 DRAWING SERIES C-SIZE 71436 3 714362000 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 A1 SHEET NUMBER 2 OF 2 1 A