0731010360

12 11 10 9 8 7 6 5 4 3 2 1 MATERIALS AND FINISHES H H BODY ZINC ALLOY PLATED NICKEL 70u" MIN CENTER CONTACT PHOSPHOR BRONZE PLATED GOLD 30u" MIN .941 ±.005 23.90 ±0.13 INSULATOR TEFLON G .270 ±.004 6.86 ±0.10 G .811 ±.005 20.60 ±0.13 INTERFACE PER MOLEX STANDARD ES-73599-0000 F F ⌀ .434 ±.002 .270 ±.004 6.86 ±0.10 11.02 ±0.05 E E 45° ⌀ .055 ±.005 .0075 ±.008 0.19 ±0.20 1.40 ±0.13 4 PLACES ⌀ .380 ±.002 9.65 ±0.05 .201 REF 5.10 .270 ±.002 6.86 ±0.05 D D .135 ±.002 3.43 ±0.05 C .135 ±.002 3.43 ±0.05 .270 ±.002 6.86 ±0.05 C +.004 -.000 +0.10 1.60 0.00 4 PLACES ⌀ .063 B ⌀ .035 ±.002 0.90 ±0.05 B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) MIGRATED TO ECTR ANGLE 45° WAS RADIUS 2018/04/26 C2 ADD DIM 11.02±0.05; 9.62±0.05; DIM 5.10 REF PER EWR12043 REV. DATE DESCRIPTION A DOCUMENT STATUS 12 P1 RELEASE DATE 11 2018/05/16 10 CURRENT REV DESC: HYBRID PCB HOLE CONFIGURATION FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 SCALE DIMENSION UNITS 03:55:41 9 8 7 6 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 2.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 176019 DRWN: CWEI02 CHK'D: YCHENG APPR: YCHENG INITIAL REVISION: DRWN: CLLI APPR: MHUANG THIRD ANGLE PROJECTION 4 2018/04/26 2018/05/16 2018/05/16 BNC JACK VERTICAL PCB 75 OHM BNC-J/PCB PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2002/05/07 2002/05/07 DRAWING SERIES C-SIZE 73101 3 SD-73101-036 MATERIAL NUMBER PSD 001 CUSTOMER 731010360 GENERAL MARKET 2 C2 SHEET NUMBER 1 OF 1 1 A