0731010400

12 11 10 9 7 8 5 6 4 3 2 1 MATERIALS AND FINISHES H BNC JACK 75 OHM INTERFACE H MXT BODY ZINC ALLOY PLATED NICKEL CENTER CONTACT PHOSPHOR BRONZE PLATED GOLD INSULATOR POLYPROPYLENE (94-V0) G 1/2-28 UNEF-2A TOP VIEW MOUNTING POST PHOSPHOR BRONZE PLATED TIN G SOLDER TAIL COPPER OVER STEEL PLATED TIN 1.375 ±.014 34.93 ±0.35 .577 REF 14.66 JAM NUT BRASS PLATED NICKEL F F .457 ±.004 11.60 ±0.10 LOCK WASHER PHOSPHOR BRONZE PLATED NICKEL .272 ±.010 6.91 ±0.25 .500 ±.010 12.70 ±0.25 E .020 REF 0.51 ⌀ .071 ±.002 +.003 .218 -.000 +0.08 5.54 0.00 +.005 -.000 +0.13 12.83 0.00 ⌀ .505 1.80 ±0.05 2 PLACES 1.105 REF 28.07 .100 2.54 .400 ±.008 10.16 ±0.20 .163 ±.012 4.15 ±0.30 D ⌀ .626 .094 REF 2.40 ⌀ .035 ±.002 REF 15.90 0.89 ±0.05 ⌖ .002/0.05 A .200 5.08 RECOMMENDED MOUNTING HOLE PANEL THICKNESS: .216 (5.50) MAX +.004 RECOMMENED MOUNTING TORQUE: ⌀ .079 -.000 1.36 N-m (12 INCH LBS) MAX +0.10 2.01 0.00 2 PLACES ⌖ .002/0.05 A E LEADS ARE TO BE ADJUSTED TO FIT PCB PATTERN 0.89 ±0.05 A B .200 REF 5.08 .100 REF 2.54 ⌀ .035 ±.002 D C .142 ±.012 3.60 ±0.30 .476 REF 12.10 .815 ±.006 20.70 ±0.15 .020 REF 0.50 .200 5.08 C .400 10.16 HEX. .630 REF 16.00 RECOMMENDED PCB HOLE CONFIGURATION B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE DIMENSION UNITS 73171-4340 73101-0401 73101-0400 PART NO. A DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 HYBRID QTY (1) OF 73101-0400 IN SINGLE BAG WITH LABEL WITH JAM NUT AND WASHER; PACKAGING BY TRAY WITHOUT JAM NUT AND WASHER; PACKAGING BY TRAY DESCRIPTION P1 RELEASE DATE 11 2018/04/03 10 GENERAL TOLERANCES (UNLESS SPECIFIED) ADD POST DIM .071±.002 A6 2018/03/26 PER EWR 11902 REV. DATE DESCRIPTION PS-89675-1030 PRODUCT SPECIFICATION SPECIFICATION DESCRIPTION 07:32:25 9 CURRENT REV DESC: 8 7 6 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 174408 DRWN: CWEI02 CHK'D: APPR: INITIAL REVISION: DRWN: MCHAN05 APPR: MHUANG THIRD ANGLE PROJECTION 4 2018/03/26 BNC JACK,R/A PCB,75 OHMS DIE CAST, RECEPTACLE BNC-J/RA/PCB PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2007/06/12 2007/06/12 DRAWING SERIES C-SIZE 73101 3 SD-73101-040 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET 2 A6 SHEET NUMBER 1 OF 1 1 A