0731711360

12 10 11 9 7 8 6 5 4 ⌀ .550 ±.008 MATERIALS AND FINISHES: 2 1 1.088 ±.020 27.64 ±0.51 13.97 ±0.20 H 3 BODY: ZINC ALLOY PLATED: SEE TABLE H CENTER CONTACT: PHOSPHOR BRONZE PLATED GOLD .432 ±.007 10.98 ±0.18 INSULATOR: PTFE G .242 ±.010 6.15 ±0.25 JAM NUT: BRASS PLATED NICKEL G .131 ±.008 3.33 ±0.20 LOCK WASHER: PHOSPHOR BRONZE PLATED NICKEL ⌀ .0380 +.0010 -.0020 .891 ±.020 22.64 ±0.51 +0.025 0.97 -0.051 F .171 ±.015 4.34 ±0.38 .459 ±.008 11.66 ±0.20 .030 ±.008 0.76 ±0.20 F ⌀ .505 +.005 -.000 +0.13 12.83 0.00 .603 ±.005 15.32 ±0.13 .035 ±.005 0.89 ±0.13 .420 ±.005 10.67 ±0.13 .050 ±.002 1.27 ±0.05 4 PLACES +.003 -.000 +0.08 5.64 0.00 .222 E .044 ±.002 1.12 ±0.05 4 PLACES E ⌀ .414 ±.008 10.52 ±0.20 RECOMMENDED PANEL CUTOUT D HEX .551 REF 14.00 ⌀ .626 .098 REF 2.50 REF D 1/2-28 UNEF-2A .020 REF 0.50 15.90 .260 REF 6.60 .130 REF 3.30 ⌀ .046 REF C .260 REF .130 REF 6.60 3.30 1.17 ⌀ .083 REF C 2.11 4 PLACES RECOMMENDED PCB HOLE PATTERN B B JAM NUT LOCK WASHER THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE DIMENSION UNITS 73171-1362 73171-1361 73171-1360 PART NO. A INCLUDED INCLUDED NOT INCLUDED WASHER/NUT NICKEL TIN TIN BODY PLATING 895420580 895420580 895420590 PACKING SPEC INCH/MM NTS GENERAL TOLERANCES (UNLESS SPECIFIED) PS-89675-1030 ELEC/MECH PERFORMANCE MIL-STD-348A, FIG. 301.2 INTERFACE SPECIFICATION DESCRIPTION DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 11 2022/10/27 10 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 2.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:53:53 9 CURRENT REV DESC: ADD PACKING SPEC PER EWR #15500-A 8 7 6 5 EC NO: 651531 DRWN: RYEH CHK'D: YCHENG APPR: YCHENG INITIAL REVISION: DRWN: AROBERTSON APPR: JWIENER THIRD ANGLE PROJECTION 4 2022/10/21 2022/10/27 2022/10/27 BNC JACK, R/A, PCB 50 OHMS, BULKHEAD BNC-J/PCB PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/01/25 2005/01/25 DRAWING SERIES C-SIZE 73171 3 SD-73171-136 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C9 SHEET NUMBER 1 OF 1 1 A