0731712630

12 11 10 9 7 8 5 6 4 3 2 1 MATERIALS AND FINISHES: H .100 MAX 2.54 PANEL BODY, CRIMP TUBE & PRESS RING : BRASS PLATED: NICKEL(100µ-in MIN) H CENTER CONTACT: PHOSPHOR BRONZE PLATED: GOLD(30µ-in MIN) OVER NICKEL(100µ-in MIN) INSULATOR: PTFE G JAM NUT: BRASS PLATED: NICKEL(70µ-in MIN) G LOCKWASHER: PHOSPHOR BRONZE PLATED: NICKEL(70µ-in MIN) ⌀ .371 ±.002 9.42 ±0.05 .530 REF 13.46 F F ⌀ .355 .020 REF 0.51 9.02 REF ⌀ .430 10.92 REF .308 REF 7.82 .150 ±.002 3.81 ±0.05 FLAT .252 REF 6.40 .479 REF 12.15 E 3.25 REF 0.50 REF 3/8-32 UNEF-2A CRIMP TUBE D .020 0.50 REF ⌀ .496 REF ⌀ .375 MIN ⌀ .152 ⌀ .020 1.73 REF D 12.60 E 3.86 REF CONTACT ⌀ .068 MINI BNC JACK INTERFACE .375 REF 9.52 ⌀ .128 .085 2.15 REF 9.52 C .163 MIN 4.14 B INCH = 0 INCLUDED INCLUDED 73171-2631, ONE PER BAG = 0 73171-2631 INCLUDED INCLUDED TRAY = 0 TRAY 73171-2630 NOT INCLUDED NOT INCLUDED JAM NUT LOCK WASHER = PACKAGING = HARDWARE COMPONENTS DOCUMENT STATUS 12 FORMAT: IN-master-tb-prod-C REVISION: C DATE: 2018/01/18 P1 RELEASE DATE 11 B SYMBOLS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE CURRENT REV DESC: SEE ECM = 0 73171-2632 PART NO. JAM NUT LOCK WASHER RECOMMENDED PANEL CUTOUT A C .433 HEX 11.00 REF 2018/04/24 10 C 15:16:06 9 8 7 6 0 0 = 0 = 0 = 0 GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 1 PLACE 0.25 ± 0 PLACES ± ANGULAR TOL ± ± ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 0.01 2.0 ° EC NO: 175335 DRWN: APRAKASH01 CHK'D: APRAKASH01 APPR: AROBERTSON INITIAL REVISION: DRWN: JMASTRIANO APPR: JWIENER THIRD ANGLE PROJECTION 4 2018/04/19 2018/04/24 2018/04/24 MINI BNC JACK, BULKHEAD RG179, 75 OHMS, MINI BNC-JC, EWR-11570 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2005/05/24 2005/05/24 DRAWING SERIES C-SIZE 73171 3 A DOC TYPE DOC PART REVISION SD-73171-263 MATERIAL NUMBER CUSTOMER PSD 001 B1 SHEET NUMBER SEE TABLE 1 OF 2 2 1 12 11 10 9 8 7 5 6 4 3 2 1 H H G G .925 REF 23.50 F .128 REF 3.25 HEX .205 REF 5.22 .479 REF 12.15 .118 3.01 REF RG-179 E RG-179 SOLDER ONLY E .453 REF 11.51 PLACE SHRINK TUBE ONTO CABLE FIRST .160 ±.008 4.07 ±0.20 CONTACT F RECOMMENDED CABLE STRIP DIMENSIONS D D C C B B SYMBOLS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE CURRENT REV DESC: SEE ECM = 0 INCH = 0 = 0 = 0 = A = DOCUMENT STATUS 12 FORMAT: IN-master-tb-prod-C REVISION: C DATE: 2018/01/18 P1 RELEASE DATE 11 2018/04/24 10 C 15:16:06 9 8 7 6 0 0 = 0 = 0 = 0 GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 1 PLACE 0.25 ± 0 PLACES ± ANGULAR TOL ± ± ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 0.01 2.0 ° EC NO: 175335 DRWN: APRAKASH01 CHK'D: APRAKASH01 APPR: AROBERTSON INITIAL REVISION: DRWN: JMASTRIANO APPR: JWIENER THIRD ANGLE PROJECTION 4 2018/04/19 2018/04/24 2018/04/24 MINI BNC JACK, BULKHEAD RG179, 75 OHMS, MINI BNC-JC, EWR-11570 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2005/05/24 2005/05/24 DRAWING SERIES C-SIZE 73171 3 A DOC TYPE DOC PART REVISION SD-73171-263 MATERIAL NUMBER CUSTOMER PSD 001 B1 SHEET NUMBER SEE TABLE 2 OF 2 2 1