0732055033

12 10 11 9 7 8 5 6 4 3 2 1 MATERIALS AND FINISHES H H BODY: ZINC ALLOY PLATED NICKEL CENTER CONTACT: PHOSPHOR BRONZE 1/2-28 UNEF-2A PLATED GOLD 14.66 REF .577 TNC JACK INSULATOR: POLYPROPYLENE G 50 OHM G INTERFACE MOUNTING POST: BRASS 15.42 REF .607 PLATED TIN F 8.39 REF .330 SOLDER TAIL: STEEL ⌀ 0.70 REF PLATED TIN .028 2 PLACES 12.06 REF .475 20.70 REF .815 28.57 REF 1.125 WASHER: PHOSPHOR BRONZE PLATED NICKEL JAM NUT: BRASS PLATED NICKEL E PACKAGING: BY TRAY 3.60 REF .142 0.51 REF .020 ⌀ 1.80 REF .071 2 PLACES 4.75 REF .187 33.65 REF 1.325 PCB PATTERN DURING INSTALLATION D 1/2-28 UNEF-2B 0.50 REF .020 ⌀ 15.90 REF 5.08 REF .200 D 2.54 REF .100 ⌀ 2.01 REF .626 ⌀ 12.83 MIN E NOTE: THESE LEADS ADJUSTABLE TO FIT 35.43 REF 1.395 5.54 MIIN .218 F .079 2 PL .505 5.08 REF .200 RECOMMENDED MOUNTING HOLE C C MAXIMUM PANEL THICKNESS: 5.4mm (.213) RECOMMENDED MOUNTING TORQUE: ⌀ 0.89 REF 1.36 N-M (12 INCH-POUNDS MAX) .035 2 PL 2.50 REF .098 14.00 REF .551 HEX PART # 73205-5033 B 10.16 REF .400 RECOMMENDED PCB LAYOUT B FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: = 0 MM/INCH NTS = GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± = A DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 11 2022/01/20 10 0 0 1 PLACE ± 0 PLACES ± 2.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:54:19 9 8 7 6 5 EWR # 14939-A CHG LOGO POSTION TO TOP SURFACE FROM SIDE SURFACE EC NO: 692635 DRWN: JSU18 CHK'D: YCHENG APPR: YCHENG INITIAL REVISION: DRWN: JWIENER APPR: JWIENER THIRD ANGLE PROJECTION 4 2022/01/11 2022/01/20 2022/01/20 TNC JACK R/A PCB 50 OHM TNC - J/RA/PCB PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2008/09/24 2008/09/24 DRAWING SERIES C-SIZE 73205 3 SD-73205-5033 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET 2 A3 SHEET NUMBER 1 OF 1 1 A