0732511040

12 11 10 9 7 8 5 6 4 3 2 1 MATERIALS AND FINISHES: H H .500 ±.008 12.70 ±0.20 BODY: BRASS PLATED GOLD CONTACT: BRASS PLATED GOLD .070 ±.010 1.78 ±0.25 .380 ±.010 9.65 ±0.25 INSULATOR: TEFLON G .375 ±.005 9.52 ±0.13 .040 ±.005 1.02 ±0.13 4 PLACES .187 ±.010 .030 ±.002 4.75 ±⌀0.25 BODY & 0.76 ±0.05 CONTACT JAM NUT: BRASS PLATED GOLD LOCK WASHER: PHOSPHOR BRONZE PLATED GOLD F G .312 ±.005 7.92 ±0.13 F HARDWARE: JAM NUT: .310/7.87 HEX X .061/1.55 LOCK WASHER: ⌀.404/10.26 X ⌀.262/6.65 X .018/0.46 .040 ±.005 1.02 ±0.13 2 PLACES .133 MAX. 3.38 PANEL E .073 ±.008 1.85 ±0.20 2 PLACES .068 ±.005 1.73 ±0.13 2 PLACES E ⌀ .038 .035 0.89 2 PLACES 0.97 2 PLACES D D .440 .250 11.18 6.35 RECOMMENDED PCB LAYOUT: .172 4.38 2 PLACES .090 2.29 BOARD THICKNESS IS .062/1.57 .103 2.62 C C ⌀ .018 .200 5.08 3 PLACES 73251-1041 NOT INCLUDED 73251-1040 INCLUDED PART NO. HARDWARE B 0.46 2 PLACES PLATED THRU HOLES B SYMBOLS A IN/MM NTS = 0 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 = 0 DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 11 2019/08/07 10 07:11:11 C 9 8 7 6 SCALE = 0 = 0 MIGRATE TO ECTR; A3 2019/07/31 ADD TOLERANCE PER EWR13268-A REV. DATE DESCRIPTION THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 1 PLACE ± 0 PLACES ± 2.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 CURRENT REV DESC: EC NO: 621770 DRWN: CWEI02 CHK'D: YCHENG APPR: YCHENG INITIAL REVISION: DRWN: AROBERTS APPR: JWIENER THIRD ANGLE PROJECTION 4 2019/07/31 2019/08/07 2019/08/07 SMA, JACK REV POLAR EDGEMOUNT FOR .062 PCB SMA-J/PCB PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/12/01 2004/12/01 DRAWING SERIES C-SIZE 73251 3 SD-73251-104 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 A3 SHEET NUMBER 1 OF 1 1 A