0732511153

12 11 10 9 .375 ±.005 9.52 ±0.13 MATERIALS AND FINISHES H 7 8 BODY: BRASS PLATED GOLD (SEE TABLE) 5 6 4 .187 ±.008 4.75 ±0.20 5 PLACES ⌀ .030 ±.002 0.76 ±0.05 PIN CONTACT 1 H .040 ±.008 1.02 ±0.20 2 PLACES INSULATOR: PTFE SMA JACK INTERFACE 2 .375 ±.008 9.52 ±0.20 .040 ±.008 1.02 ±0.20 2 PLACES .020 ±.005 0.51 ±0.13 CENTER CONTACT: BERYLLIUM COPPER PLATED GOLD (SEE TABLE) 3 .171 ±.008 4.34 ±0.20 G G F .075 ±.008 1.90 ±0.20 2 PLACES .065 ±.008 1.65 ±0.20 E ⌀ .038 REF D 0.97 2 PLACES .103 REF 2.62 .270 6.86 REF C E .355 REF 9.02 .028 REF 0.71 2 PLACES .440 11.18 REF .250 6.35 REF .385 9.78 REF .090 2.29 REF .170 REF 4.32 73251-1153 GOLD (1µ-in MIN) OVER NICKEL (50µ-in MIN) GOLD (5µ-in MIN) OVER NICKEL (50µ-in MIN) TRAY (80 PIECES) 73251-1152 GOLD (10µ-in MIN) OVER NICKEL (50µ-in MIN) GOLD (10µ-in MIN) OVER NICKEL (100µ-in MIN) TRAY (20 PIECES) 73251-1151 GOLD (10µ-in MIN) OVER NICKEL (50µ-in MIN) GOLD (10µ-in MIN) OVER NICKEL (100µ-in MIN) ONE 73251-1150 PER BAG 73251-1150 GOLD (10µ-in MIN) OVER NICKEL (50µ-in MIN) GOLD (10µ-in MIN) OVER NICKEL (100µ-in MIN) TRAY (80 PIECES) BODY PART NO. B .018 REF 0.46 2 PLACES PRODUCT SPECIFICATION MIL-STD-348B, FIG. 310-2 ⌀ .018 REF SPECIFICATION DOCUMENT STATUS 12 FORMAT: IN-master-tb-prod-C REVISION: C DATE: 2018/01/18 P1 DESCRIPTION RELEASE DATE 11 2018/03/01 10 0 = 0 = 0 = 20:38:20 8 = = C 9 7 DESCRIPTION B PACKAGING PLATING INCH 0.46 PLATED THRU 2 PLACES BOARD THICKNESS: .062 [1.57] BOARD MATERIAL: FR4 WITH 1.0 OZ (28 g) COPPER ON BOTTOM (GROUND) SIDE INTERFACE CONTACT C SYMBOLS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE CURRENT REV DESC: SEE ECM = 0 PCB PAD (FOR REFERENCE ONLY) A PS-89675-3460 F .035 REF 0.89 2 PLACES .230 REF 5.84 6 PLACES D .066 ±.003 1.68 ±0.08 2 PLACES 6 0 0 = 0 = 0 = 0 NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± 0.005 2 PLACES ± 0.13 ± ± 0.25 ± 1 PLACE 0 PLACES ± ANGULAR TOL ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 0.01 2.0 ° EC NO: 172847 DRWN: LMEIER CHK'D: SSSHAH APPR: AROBERTSON INITIAL REVISION: DRWN: TEF APPR: GMH THIRD ANGLE PROJECTION 4 2018/02/23 2018/03/01 2018/03/01 SMA JACK, EDGE MOUNT 50 OHMS, EWR-11795 SMA-J/PCB PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2002/06/27 2002/06/27 DRAWING SERIES C-SIZE 73251 3 A DOC TYPE DOC PART REVISION SD-73251-115 MATERIAL NUMBER CUSTOMER PSD 001 B1 SHEET NUMBER SEE TABLE 1 OF 1 2 1