0733861430

12 11 10 9 MATERIALS AND FINISHES: H 8 7 5 6 4 3 2 1 TYPICAL VSWR OF 1.5 TO 26 GHz BODY: STAINLESS STEEL PASSIVATED H OUTER CONTACT: BERYLLIUM COPPER PLATED GOLD (10µ-in MIN) OVER NICKEL (100µ-in MIN) G CENTER CONTACT: BERYLLIUM COPPER PLATED GOLD (10µ-in MIN) OVER NICKEL (100µ-in MIN) G INSULATOR: PTFE .663 REF 16.84 F F .201 REF 5.09 .130 REF 3.30 E E SMA JACK INTERFACE SMP JACK INTERFACE .188 REF 4.76 ACROSS FLATS D D 1/4-36 UNS-2A R/P R/P C 73386-1430 B C .587 REF 14.91 TRAY PART NO. B PACKAGING SYMBOLS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE CURRENT REV DESC: REDRAWN AND REVISED = 0 INCH = 0 = 0 = 0 = A MIL-STD-348B, FIG. 326.1 MIL-STD-348B, FIG. 310.2 SMP INTERFACE SMA INTERFACE SPECIFICATION DOCUMENT STATUS 12 FORMAT: IN-master-tb-prod-C REVISION: C DATE: 2018/01/18 P1 = RELEASE DATE 11 DESCRIPTION 2018/05/17 10 C 18:09:14 9 8 7 6 0 0 = 0 = 0 = 0 NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± ± ± ± 1 PLACE 0 PLACES ± ANGULAR TOL ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 2.0 ° EC NO: 176816 DRWN: LMEIER CHK'D: SSSHAH APPR: AROBERTSON INITIAL REVISION: DRWN: AZR APPR: YCHENG THIRD ANGLE PROJECTION 4 2018/05/15 2018/05/17 2018/05/17 BSA SMA JACK TO SMP JACK 50 OHMS BSA-SMA/SMP, EWR-12098 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2009/06/01 2015/02/04 DRAWING SERIES C-SIZE 73386 3 A DOC TYPE DOC PART REVISION SD-73386-143 MATERIAL NUMBER CUSTOMER PSD 001 A1 SHEET NUMBER SEE TABLE 1 OF 1 2 1