0734040430

12 11 10 9 7 8 5 6 4 3 2 1 MATERIALS AND FINISHES H 17.01 REF .670 BODY: ZINC ALLOY 9.53 REF .375 PLATED SEE TABLE H CENTER CONTACT ⌀ 3.86 REF BERYLLIUM COPPER .152 PLATED GOLD G OUTER CONTACT: BERYLLIUM COPPER CRIMP TUBE RG179 CABLE G PLATED SEE TABLE 3.25 HEX .128 INSULATOR POLYPROPYLENE CAP, CRIMP TUBE: BRASS F ⌀ 7.37 REF 13.11 REF .516 PLATED SEE TABLE F .290 PACKAGE SEE 895420040 DRAWING 11.40 REF .449 JACKET 5.08 REF .200 BRAID E SMB PLUG INTERFACE ⌀ 5.69 REF E .224 13.86 REF .546 1.45 REF .057 CENTER CONDUCTOR CAP 6.35 REF .250 D D RECOMMENDED CABLE STRIP DIMENSIONS 73404-0432 NICKEL GOLD NICKEL 73404-0431 GOLD GOLD GOLD GOLD 73404-0430 NICKEL NICKEL NICKEL NICKEL PART NO. BODY C PLATING NICKEL C OUTER CONTACT PLATING CAP PLATING CRIMP TUBE PLATING B B PS-89675-3540 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: ELECTRO/MECH PERFORM. MIL-STD-348A, FIG. 311.2 INTERFACE DESCRIPTION SPECIFICATION DOCUMENT STATUS 12 P1 RELEASE DATE 11 2022/02/16 10 0 MM/INCH NTS = GENERAL TOLERANCES (UNLESS SPECIFIED) 0 ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± = A FORMAT: master-tb-prod-C REVISION: J DATE: 2020/01/14 = 0 1 PLACE ± 0 PLACES ± 2.0 ° 0.13 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:59:13 9 8 7 6 5 EWR # 13942-B ADDED -0432 PART NO EC NO: 693776 DRWN: JSU18 CHK'D: YCHENG APPR: YCHENG INITIAL REVISION: DRWN: RFC_PLMIMP APPR: JWIENER THIRD ANGLE PROJECTION 4 2020/08/13 2022/02/16 2022/02/16 SMB PLUG 75 OHMS, R/A RG-179 CABLE SMB-PC/RA PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2018/01/30 2006/03/30 DRAWING SERIES C-SIZE 73404 3 SD-73404-043 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET 2 A4 SHEET NUMBER 1 OF 1 1 A