0734067022

12 H G F 10 11 9 8 MATERIALS AND FINISHES: ELECTRICAL BODY: BERYLLIUM COPPER OPTION 1: PLATED: GOLD (30µ-in MIN) OVER NICKEL (100µ-in MIN) OPTION 2: PLATED GOLD (8µ-in MIN) OVER NICKEL PHOSPHOR (80µ-in MIN) OVER COPPER (20µ-in MIN) FREQUENCY RANGE DC-18 GHz VSWR: 1.35 MAX 7 6 5 4 3 2 1 H CONTACT: BERYLLIUM COPPER OPTION 1: PLATED: GOLD (30µ-in MIN) OVER NICKEL (100µ-in MIN) OPTION 2: PLATED GOLD (8µ-in MIN) OVER NICKEL PHOSPHOR (80µ-in MIN) OVER COPPER (20µ-in MIN) G .275 REF 6.97 .158 REF 4.00 EMI RING: BERYLLIUM COPPER OPTION 1: PLATED: GOLD (10µ-in MIN) OVER NICKEL (100µ-in MIN) OPTION 2: PLATED GOLD (8µ-in MIN) OVER NICKEL PHOSPHOR (80µ-in MIN) OVER COPPER (20µ-in MIN) .141 REF 3.58 F .025 REF 0.64 SMP JACK INTERFACE E D ⌀ .114 REF CAP: BRASS OPTION 1: PLATED: GOLD (30µ-in MIN) OVER NICKEL (100µ-in MIN) .259 REF OPTION 2: 6.58 PLATED GOLD (8µ-in MIN) OVER NICKEL PHOSPHOR (80µ-in MIN) OVER COPPER (20µ-in MIN) E 2.90 .157 REF 4.00 CAP .109 REF 2.76 .101 REF 2.58 INSULATOR: PTFE C D C ⌀ .089 REF ⌀ .120 REF 2.26 3.05 LABEL WITH EACH BAG FOR 73406-7022 ⌀ .067 REF 1.70 MOLEX P/N: 73406-7022 DATE: YYWW B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE CURRENT REV DESC: ADD 73406-7022 FOR SMALL PACK PER EWR15321-D DIMENSION UNITS 73406-7022 73406-7021 73406-7020 PART NO. A SAME AS 73406-7021 ONE PER BAG 895420470 OPTION 2 OPTION 2 OPTION 2 OPTION 2 TRAY 895420040 OPTION 1 OPTION 1 OPTION 1 OPTION 1 BODY CONTACT EMI RING CAP PACKAGING PACKING SPEC INCH/MM GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± DOCUMENT STATUS 12 P1 RELEASE DATE 11 2022/08/23 10 INCH DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 12:44:04 9 8 7 6 5 SMP JACK RA FOR 086 SIZE CABLES SMP - JC EWR-10580-A ± EC NO: 718352 ± 0.01 DRWN: CWEI02 3 PLACES ± CHK'D: YCHENG 2 PLACES ± 0.25 ± APPR: YCHENG ± 1 PLACE ± INITIAL REVISION: ± 0 PLACES ± DRWN: BSHAH ± 2.0 ° APPR: ANGULAR TOL AROBERTSON PS-89675-3320 ELECTRICAL / MECHANICAL PERFORMANCE MIL-STD-348B, FIG. 326.1 INTERFACE SPECIFICATION DESCRIPTION FORMAT: IN-master-tb-prod-C REVISION: D1 DATE: 2021/05/01 NTS THIRD ANGLE PROJECTION 4 2022/08/17 2022/08/23 2022/08/23 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2015/10/02 2015/10/09 DRAWING SERIES C-SIZE 73406 3 A DOC TYPE DOC PART SD-73406-702 MATERIAL NUMBER CUSTOMER PSD 001 REVISION A3 SHEET NUMBER SEE TABLE 1 OF 2 2 1 12 10 11 1 H 9 7 8 2 STRIP JACKETED OR NON-JACKETED CABLE AS SHOWN. .040 REF 1.02 DIELECTRIC .040 REF 1.02 DIELECTRIC .087 REF 2.21 6 5 4 3 3 IF NECESSARY, ALIGN CONTACT SLOT WITH CABLE ENTRY OPENING AS SHOWN. 2 1 INSERT CABLE INTO CABLE ENTRY OPENING UNTIL CABLE STOP. SOLDER THE CABLE AND BODY, THEN CABLE AND CONTACT WHERE SHOWN. H .087 REF 2.21 G G .245 REF 6.22 SOLDER CONTACT SECOND F F JACKET CONTACT SLOT JACKETED .086 FLEXIBLE CABLES E 4 CABLE STOP NON-JACKETED .086 SEMI-RIGID CABLES E SOLDER BODY FIRST SUPPORT CONNECTOR ON SURFACE SHOWN AND PRESS CAP FLUSH WITH REAR SURFACE OF BODY. D D PRESS CAP FLUSH CABLE ENTRY OPENING C C CAP SUPPORT CONNECTOR HERE B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE CURRENT REV DESC: ADD 73406-7022 FOR SMALL PACK PER EWR15321-D DIMENSION UNITS INCH/MM NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± INCH EC NO: 718352 ± 0.01 DRWN: CWEI02 3 PLACES ± CHK'D: YCHENG 2 PLACES ± 0.25 ± APPR: YCHENG ± 1 PLACE ± INITIAL REVISION: ± 0 PLACES ± DRWN: BSHAH ± 2.0 ° APPR: ANGULAR TOL AROBERTSON A DOCUMENT STATUS 12 FORMAT: IN-master-tb-prod-C REVISION: D1 DATE: 2021/05/01 P1 RELEASE DATE 11 2022/08/23 10 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 12:44:04 9 8 7 6 5 SMP JACK RA FOR 086 SIZE CABLES SMP - JC EWR-10580-A ± THIRD ANGLE PROJECTION 4 2022/08/17 2022/08/23 2022/08/23 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2015/10/02 2015/10/09 DRAWING SERIES C-SIZE 73406 3 A DOC TYPE DOC PART SD-73406-702 MATERIAL NUMBER CUSTOMER PSD 001 REVISION A3 SHEET NUMBER SEE TABLE 2 OF 2 2 1