0734153640

12 11 10 9 7 8 5 6 4 3 2 1 MATERIALS AND FINISHES: 734153640 AND 734153642 H H BODY, CAP & CRIMP TUBE: BRASS PLATED: GOLD (10µ-in MIN) OVER NICKEL (100µ-in MIN) ⌀ .244 REF 6.20 CONTACT: BRASS PLATED: GOLD (30µ-in MIN) OVER NICKEL (100µ-in MIN) CRIMP TUBE: COPPER PLATED: NICKEL (100µ-in MIN). G G OUTER CONTACT: BERYLLIUM COPPER PLATED: GOLD (10µ-in MIN) INSULATOR, SPACER: PTFE F F MATERIALS AND FINISHES: 734153641 .311 REF 7.90 BODY & CRIMP TUBE: BRASS PLATED: NICKEL (70µ-in MIN) E CRIMP TUBE .240 REF 6.10 .255 REF 6.48 CAP SPACER E CONTACT: BRASS PLATED: GOLD (5µ-in MIN) OVER NICKEL (50µ-in MIN) OUTER CONTACT: BERYLLIUM COPPER PLATED: NICKEL (70µ-in MIN) ⌀ .152 REF ⌀ .128 REF 3.86 3.25 CAP: BRASS PLATED: NICKEL (100µ-in MIN) D D INSULATOR, SPACER: PTFE C 73415-3642 73415-3641 73415-3640 PART NO. .390 REF 9.91 C 73415-3640 FOR TRAY SMALL QTY, PER P/N 89542-0045 TRAY PER P/N 89542-0040 TRAY PER P/N 89542-0040 PACKAGING ⌀ .068 REF 1.73 B B AS-89678-8590 PS-89675-1830 IEC 61169-36 SPECIFICATION ASSY INSTRUCTIONS PRODUCT SPEC. INTERFACE DESCRIPTION FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: ADD PN 73415-3642 PER EWR14242-C = 0 IN/MM NTS = GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± = A DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 11 2021/02/08 10 0 0 1 PLACE ± 0 PLACES ± 2.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:05:44 9 8 7 6 5 EC NO: 654526 DRWN: CWEI02 CHK'D: YCHENG APPR: YCHENG INITIAL REVISION: DRWN: RFC_PLMIMP APPR: YCHENG THIRD ANGLE PROJECTION 4 2021/01/13 2021/02/08 2021/02/08 MCX, PLUG R/A FOR RG179 CABLE 75? MCX-PC/RA, EWR # 14077 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/12/28 2014/09/12 DRAWING SERIES C-SIZE 73415 3 SD-73415-364 MATERIAL NUMBER CUSTOMER PSD 001 A5 SHEET NUMBER SEE TABLE 1 OF 2 2 1 A 12 11 10 9 7 8 .323 ±.010 8.20 ±0.25 5 6 4 3 2 1 CABLE JACKET CRIMP TUBE .123 ±.010 3.12 ±0.25 H H 1. STRIP CABLE TO DIMENSIONS SHOWN. DO NOT NICK BRAID OR CENTER CONDUCTOR. SLIDE CRIMP TUBE ONTO CABLE. .036 ±.010 0.91 ±0.25 G G CRIMP REAR ACCESS 2. FLARE CABLE BRAID AND SLIDE CABLE INTO BODY. MAKE SURE CABLE INSULATOR BOTTOMS ON CONNECTOR CONTACT. SOLDER CABLE CONDUCTOR TO CONTACT. ARRANGE BRAID UNIFORMLY AROUND STEM. SLIDE CRIMP TUBE OVER BRAID FLUSH TO BODY AND CRIMP USING .128 [3.25MM] "HEX" DIE. F F SOLDER CAP E E SPACER 3. PLACE SPACER AND CAP INTO ACCESS PORT AND SEAL WITH A Ø.156[3.96MM] FLAT PUNCH. D D C C .455 REF 11.56 .355 REF 9.02 B B RG179 CABLE .311 7.90 REF FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: ADD PN 73415-3642 PER EWR14242-C .169 REF 4.29 HEX .128 REF 3.25 MCX PLUG INTERFACE DOCUMENT STATUS 12 P1 RELEASE DATE 11 2021/02/08 10 0 IN/MM NTS = GENERAL TOLERANCES (UNLESS SPECIFIED) 0 ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± = A FORMAT: master-tb-prod-C REVISION: J DATE: 2020/01/14 = 0 1 PLACE ± 0 PLACES ± 2.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:05:44 9 8 7 6 5 EC NO: 654526 DRWN: CWEI02 CHK'D: YCHENG APPR: YCHENG INITIAL REVISION: DRWN: RFC_PLMIMP APPR: YCHENG THIRD ANGLE PROJECTION 4 2021/01/13 2021/02/08 2021/02/08 MCX, PLUG R/A FOR RG179 CABLE 75? MCX-PC/RA, EWR # 14077 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/12/28 2014/09/12 DRAWING SERIES C-SIZE 73415 3 SD-73415-364 MATERIAL NUMBER CUSTOMER PSD 001 A5 SHEET NUMBER SEE TABLE 2 OF 2 2 1 A