0734153744

12 H G F 10 11 9 7 8 MATERIALS AND FINISHES: ELECTRICAL CHARACTERISTICS: BODY: BERYLLIUM COPPER OPTION 1: PLATED GOLD (30µ-in MIN) OVER NICKEL (100µ-in MIN) OPTION 2: PLATED GOLD (10µ-in MIN) OVER NICKEL (100µ-in MIN) OPTION 3: PLATED GOLD (8µ-in MIN) OVER NICKEL PHOSPHOR (80µ-in MIN) OVER COPPER (20µ-in MIN) NOMINAL IMPEDANCE: 50Ω FREQUENCY RANGE: DC - 26.5 GHz VSWR: 1.20 MAX DC - 15.0 GHz 1.50 MAX 15.0 GHz - 26.5 GHz 5 6 4 3 2 1 H .242 REF 6.15 ⌀ .157 REF 4.00 G .171 REF 4.35 CONTACT: BERYLLIUM COPPER OPTION 1: PLATED GOLD (30µ-in MIN) OVER NICKEL (100µ-in MIN) OPTION 3: PLATED GOLD (8µ-in MIN) OVER NICKEL PHOSPHOR (80µ-in MIN) OVER COPPER (20µ-in MIN) ⌀ .089 REF 2.25 ⌀ .021 REF ⌀ .028 REF 0.53 0.71 F ⌀ .142 REF 3.61 INSULATOR: PTFE E .165 REF 4.19 EMI RING: BRASS OPTION 1: PLATED GOLD (30µ-in MIN) OVER NICKEL (100µ-in MIN) OPTION 3: PLATED GOLD (8µ-in MIN) OVER NICKEL PHOSPHOR (80µ-in MIN) OVER COPPER (20µ-in MIN) SOLDER .046 REF 1.17 SOLDER D C A D RG405 (.086) TF100067-1086 .004 ±.004 0.10 ±0.10 CONTACT B E LABEL FORMAT FOR 73415-3741 LABEL FORMAT FOR 73415-3744 PART NUMBER: 73415-3740 ORDER NUMBER: 73415-3741 MOLEX DATE: YYWW PART NUMBER: 73415-3743 ORDER NUMBER: 73415-3744 MOLEX DATE: YYWW 73415-3744 73415-3743 73415-3742 73415-3741 73415-3740 PART NO. 73415-3743 ONE PER BAG OPTION 3 OPTION 3 OPTION 3 73415-3743 TRAY 73415-3742 TRAY OPTION 2 OPTION 1 OPTION 1 73415-3740 ONE PER BAG OPTION 1 73415-3740 TRAY BODY CONTACT EMI RING DESCRIPTION RECOMMENDED STRIP DIMENSIONS C B 895420470 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 895420040 INCH/MM NTS 895420500 895420040 PACKAGING SPEC DOCUMENT STATUS 12 P1 RELEASE DATE 11 2022/08/29 10 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 2.0 ° 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 06:23:05 9 8 CURRENT REV DESC: ADD 73415-3744 PER EWR #15321-B GENERAL TOLERANCES (UNLESS SPECIFIED) PS-89675-3320 ELEC/MECH PERFORMANCE MIL-STD-348B. FIG. 326.1 INTERFACE SPECIFICATION DESCRIPTION FORMAT: master-tb-prod-C REVISION: J1 DATE: 2021/05/01 SCALE DIMENSION UNITS 7 6 5 EC NO: 719077 DRWN: RYEH CHK'D: YCHENG APPR: YCHENG INITIAL REVISION: DRWN: RFC_PLMIMP APPR: JWIENER THIRD ANGLE PROJECTION 4 2022/08/12 2022/08/29 2022/08/29 SMP JACK STR FOR RG405 CABLE SMP-JC EWR-1350 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/12/28 2010/09/30 DRAWING SERIES C-SIZE 73415 3 SD-73415-374 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C4 SHEET NUMBER 1 OF 1 1 A