0735912054

9 7 8 6 5 4 3 2 1 RECOMMENDED LAND PATTERN : Zone A must be attached to heat sink. Thermal conductivity of intermediate layers between Zone A and heat sink must be better than 0.1 W / [°C x mm]. E 12.25[.482] 10.0 Typical 13.0 MAX 13.08 [.515] 9.00 [.354] E 19.1 [.752] .50 [.020] 8.00 [.315] 6.0 [.235] Ø15.00 [Ø.591] molex 1 2 7.55 [.297] 6.00 [.236] 0735912054 .1[.002] 4 13° 2.40 [.094] 30.0 [1.180] R11.50 [R.453] 17.5 [.689] 3.07 [.121] D Ø2.00 [Ø.079] 3PL Ø23.4 [Ø.921] 3.07 [.121] Ø2.50 [Ø.098] Solder Pad 2PL 13.28 [.523] R6.50 [R.256] D ZONE A 19.00 [.748] 11.0 [.433] 11.00 [.433] 33.5 [1.319] PCB Material: RO4350B,20mil [ 0.10 0.004 0.00 0.000 C ] 9.0±0.20 [.352±0.008] C Ø1.20 [.047] 2PL B A ELECTRICAL SPECIFICATIONS : Frequency Range : 753 to 803 MHz Input Power : 130 W Input Power, Peak : 1300 W Reflected power : 80 W Isolation : 22 dB Min Return Loss (Measured at port 1 and port 2 ) : 22 dB Min (0°C-115°C) (Measured at port 1 and port 2 ) : 20 dB Min (-40°C-0°C) Return Loss P4 : 20 dB Min Insertion Loss (within frequency range, port 1 to 2) : 0.30 dB Max Intermodulation distortion, IM3(2 x 50 W) : -65 dBc Max IM5(2 x 50 W) : -75 dBc Max Harmonics: 2 x f(100W CW) : 0dBm Max 3-4 x f (100W CW) :-10 dBm Max 5 x f (100W CW) :-35 dBm Max 6-7 x f (100W CW) :-25 dBm Max Operating temperature range : -40°C to +115°C Storage temperature range : -40°C to +125°C Direction : CW BODY: STEEL, SILVER PLATED ISOLATOR WITHSTANDS LEAD FREE SOLDERING PROCESS WITH MAXIMUM TEMPERATURE +260°C, 10 Sec. NOTES : 1.STANDARD INPUT/OUTPUT IMPEDANCE 50 Ohm 2.LEAD FREE, NO Nd MATERIAL, BeO FREE 3.THE DIMENSION OF DATA MATRIX IS 7.6X7.6MM INFORMATION INCLUDING WORK ORDER NUMBER-SERIAL NUMBER-MATERIAL NUMBER 4.THIS PART COMPLIES WITH ALL RoHS REQUIREMENTS ENG PART#: 808-075-080-WR040 FUNCTIONAL SYMBOLS =0 =0 =0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM 1:1 mm 9 P1 RELEASE DATE 2022/03/01 8 INCH 4 PLACES ± 0.005 ± ---- 3 PLACES ± 0.025 ± ---- DIVISIONAL SYMBOLS 2 PLACES ± 0.13 1 PLACE ± 0.25 ANGULAR TOL ± DOCUMENT STATUS ± ---± ---± ---1.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 06:07:14 7 6 4 CURRENT REV DESC: RELEASE TO PROD GENERAL TOLERANCES (UNLESS SPECIFIED) 0 PLACES ± 0.4 FORMAT: ACAD-tb-prod-A3 REVISION: B DATE: 2020/01/14 B EC NO: 696580 DRWN: SREN05 CHK'D: JLI252 APPR: HWANG186 INITIAL REVISION: DRWN: SREN05 APPR: HWANG186 THIRD ANGLE PROJECTION 3 2022/02/21 2022/02/23 2022/03/01 RESTRICTED PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2021/11/12 2022/03/01 DRAWING SERIES A3-SIZE 73591 DOC TYPE DOC PART REVISION 735912054 MATERIAL NUMBER 2 A SMSJ ISOLATOR/753~803 MHZ/CW 0735912054 PSD 000 CUSTOMER A SHEET NUMBER CUSTOM PART 1 1 OF 1