0735912086

9 E 8 7 6 5 4 3 2 1 RECOMMENDED LAND PATTERN : Zone A must be attached to heat sink. Thermal conductivity of intermediate layers between Zone A and heat sink must be better than 0.1 W / [°C x mm]. E 120° 7.5±0.25 [.295±0.010] 17.7 [.696] 17.7 [.696] Ø1.8 [Ø.071] Solder Pad 2PL 5.1 [.201] 5.1 [.201] 2 molex 1 0735912086 D 1.5 [.061] MIN 2PL Ø1.3 [.051] PIN 2PL D Ø15.9 [Ø.625] .1[.002] Ø9.0 [Ø.353] 15.3 [.602] 15.3 [.602] Data Matrix Ø18.0 [Ø.709] ZONE A C C PCB MATERIAL:ROGERS 4350B 20MIL [ 0.10 0.004 0.00 0.000 B A ELECTRICAL SPECIFICATION : Frequency Range : 1805 to 1880 MHz Isolation (In Band) : 28 dB Min Insertion Loss : 0.18 dB Max FWD Power : 150W (CW) Peak Power : 1000 W REV Power : 60 W Return Loss : 25 dB Min IMD (2 x 65 W, 1 MHz space) : -70 dBc Max 2nd Harmonics : 10 dBc 3rd Harmonics : 5 dBc Operating Temperature : -40°C to +120°C +120°C to +130°C : power capacity and reliability no change , other spec.reduce 10% Storage Temperature : -40°C to +130°C Direction : CCW ] BODY: CARBON STEEL, SILVER PLATED RIGID PINS: COPPER, SILVER PLATED NOTES: 1. STANDARD INPUT/OUTPUT IMPEDANCE 50 OHM 2. LEAD FREE, NO ND MATERIAL, BEO FREE 3.THE DIMENSION OF THE DATA MATRIX IS 5.3MM*5.3MM, INFORMATION INCLUDED WORK ORDER NUMBER-SERIAL NUMBER-MATERIAL NUMBER 4.THIS PART COMPLIES WITH ALL ROHS REQUIREMENTS. ENG PART#: 811-180-188-WC140 FUNCTIONAL SYMBOLS =0 =0 =0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM 1:1 mm ± ---- 3 PLACES ± 0.025 ± ---- ± 0.25 0 PLACES ± 0.4 ANGULAR TOL ± 9 P1 RELEASE DATE 2022/03/01 8 INCH 4 PLACES ± 0.005 1 PLACE DOCUMENT STATUS ± ---± ---± ---1.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 06:07:30 7 6 4 CURRENT REV DESC: RELEASE TO PROD GENERAL TOLERANCES (UNLESS SPECIFIED) DIVISIONAL SYMBOLS 2 PLACES ± 0.13 FORMAT: ACAD-tb-prod-A3 REVISION: B DATE: 2020/01/14 B EC NO: 696580 DRWN: SREN05 CHK'D: JLI252 APPR: HWANG186 INITIAL REVISION: DRWN: SREN05 APPR: HWANG186 THIRD ANGLE PROJECTION 3 2022/02/21 2022/02/23 2022/03/01 RESTRICTED PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2021/12/08 2022/03/01 DRAWING SERIES A3-SIZE 73591 DOC TYPE DOC PART REVISION 735912086 MATERIAL NUMBER 2 A SMSJ ISOLATOR/1805~1880MHZ/CCW 0735912086 PSD 000 CUSTOMER A SHEET NUMBER CUSTOM PART 1 1 OF 1