0735912089

9 8 7 6 5 4 3 2 1 RECOMMENDED LAND PATTERN : Zone A must be attached to heat sink. Thermal conductivity of intermediate layers between Zone A and heat sink must E be better than 0.1 W / [°C x mm]. E 17.7 [.696] Ø1.8 [Ø.071] Solder Pad 2PL molex 1 5.1 [.201] 5.1 [.201] 120° 7.5±0.25 [.295±0.010] 17.7 [.696] 2 1.5 [.061]MIN 2PL Ø1.3 [.051] PIN 2PL 0735912089 Ø15.9 [Ø.625] .1[.002] Ø9.0 [Ø.353] D Data Matrix 15.3 [.602] D Ø18.0 [Ø.709] 15.3 [.602] ZONE A PCB MATERIAL:ROGERS 4350B 20MIL C C [ ] 0.10 0.004 0.00 0.000 BODY: CARBON STEEL, SILVER PLATED B ELECTRICAL SPECIFICATION : RIGID PINS: COPPER, SILVER PLATED Frequency Range : 2620 to 2690 MHz NOTES: Isolation : 28 dB Min 1. STANDARD INPUT/OUTPUT IMPEDANCE 50 Ohm Insertion Loss : 0.18 dB Max 2. LEAD FREE, NO Nd MATERIAL, BeO FREE FWD Power : 150W (CW) 3.THE DIMENSION OF THE DATA MATRIX IS 5.3MM*5.3MM, INFORMATION INCLUDED WORK ORDER NUMBER-SERIAL NUMBER-MATERIAL NUMBER Peak Power : 1000 W 4.THIS PART COMPLIES WITH ALL ROHS REQUIREMENTS. REV Power : 60 W Return Loss : 25 dB Min IMD (2 x 65 W, 1 MHz space) : -70 dBc Max 2nd Harmonics : 10 dBc ENG PART#: 801-262-269-WC140 3rd Harmonics : 5 dBc CURRENT REV DESC: Operating Temperature : -40°C to +120°C MM 1:1 RELEASE TO PROD =0 +120°C to +130°C : power capacity and reliability no change , =0 EC NO: 696580 SMSJ ISOLATOR/2620~2690MHZ/CW other spec.reduce 10% 2022/02/21 DRWN: SREN05 =0 CHK'D: JLI252 2022/02/23 Storage Temperature : -40°C to +130°C APPR: HWANG186 2022/03/01 RESTRICTED PRODUCT CUSTOMER DRAWING INITIAL REVISION: Direction : CW 2021/12/08 DRWN: SREN05 FUNCTIONAL SYMBOLS B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL TOLERANCES (UNLESS SPECIFIED) A mm ± ---- 3 PLACES ± 0.025 ± ---- DIVISIONAL SYMBOLS 2 PLACES ± 0.13 1 PLACE ± 0.25 0 PLACES ± 0.4 ANGULAR TOL ± DOCUMENT STATUS FORMAT: ACAD-tb-prod-A3 REVISION: B DATE: 2020/01/14 9 P1 RELEASE DATE 2022/03/01 8 INCH 4 PLACES ± 0.005 ± ---± ---- 1.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 06:07:32 7 6 4 DOCUMENT NUMBER ± ---- APPR: 3 2022/03/01 HWANG186 THIRD ANGLE PROJECTION DRAWING SERIES A3-SIZE 73591 735912089 MATERIAL NUMBER 2 DOC TYPE DOC PART REVISION 0735912089 PSD 000 CUSTOMER A SHEET NUMBER CUSTOM PART 1 1 OF 1 A